I have installed ggplot2 in R but when I try to load it, R gives this ERROR message:
library(ggplot2)
Error: package or namespace load failed for ‘ggplot2’ in loadNamespace(i, c(lib.loc, .libPaths()), versionCheck = vI[[i]]): namespace ‘rlang’ 0.4.6 is already loaded, but >= 0.4.7 is required
What should I do?
Thanks in advance.
Install the full tidyverse package, it will load all graphics dependencies include gglot2 and its dependencies too.
install.packages("tidyverse")
As mentioned here:
https://community.rstudio.com/t/i-cant-load-ggplot2-in-my-library-in-r-version-3-4-3/6466
I am working on WINDOWS OS and I had same problems with loading ggplot2 and other libraries. I tried to install it like it was suggested in other threads, but it didn't solve the problem. I found some similar issues in other topics, and i figured out that my Rstudio console wanted to have fresh a toolchain bundle called Rtools. It can be downloaded from CRAN REP.
You have to pick appripiote version for your Rengine version. If you do not know what version of R you have, you have to simple type R.version in console, and then download proper version of Rtools. After that, i updated every libraries in Rstudio. ggplot2, tidyverse and many other are working properly from that time
I hope that it could help somebody :)
Related
I'm getting the following error when I'm loading tidyverse. It was all working fine
a few minutes ago when I was running my shinyapp. How should I resolve this?
Error: package or namespace load failed for ‘tidyverse’ in
loadNamespace(i, c(lib.loc, .libPaths()), versionCheck = vI[[i]]):
namespace ‘rlang’ 0.3.0.1 is already loaded, but >= 0.3.1 is required
I had the same problem but managed to tackle it. You may remove the current version of rlang using the following command:
remove.packages("rlang")
and then install the rlang again:
install.packages("rlang")
After that run the library:
library(tidyverse)
I know this is an old question but I faced this same problem. I restarted R session and it worked fine after that. Hope this helps someone! :)
In addition to unloading and reloading rlang,
Click on Tools in the tab and check for Package Updates to update tidyverse
Also had similar problem but resolved it after a struggle. I used:-
devtools::install_github("tidyverse/tidyverse")
I have just encountered the similar problem.
The error could translate into understandable English as:
package 'rlang' version 0.3.0.1 is loaded into R successfully, but the other package that based on 'ralng' required a higher version (at least 0.3.1).
So that manually install.packages('rlang') will update the latest appropriate package 'rlang'
I know this might be late answer,but I had the same issue and I fixed it by updating the packages, specifically : ggplot2, scales. according to this Rstudio site
Start with install.packages("devtools") then install.packages("rlang").
I'm getting the following error when I'm loading tidyverse. It was all working fine
a few minutes ago when I was running my shinyapp. How should I resolve this?
Error: package or namespace load failed for ‘tidyverse’ in
loadNamespace(i, c(lib.loc, .libPaths()), versionCheck = vI[[i]]):
namespace ‘rlang’ 0.3.0.1 is already loaded, but >= 0.3.1 is required
I had the same problem but managed to tackle it. You may remove the current version of rlang using the following command:
remove.packages("rlang")
and then install the rlang again:
install.packages("rlang")
After that run the library:
library(tidyverse)
I know this is an old question but I faced this same problem. I restarted R session and it worked fine after that. Hope this helps someone! :)
In addition to unloading and reloading rlang,
Click on Tools in the tab and check for Package Updates to update tidyverse
Also had similar problem but resolved it after a struggle. I used:-
devtools::install_github("tidyverse/tidyverse")
I have just encountered the similar problem.
The error could translate into understandable English as:
package 'rlang' version 0.3.0.1 is loaded into R successfully, but the other package that based on 'ralng' required a higher version (at least 0.3.1).
So that manually install.packages('rlang') will update the latest appropriate package 'rlang'
I know this might be late answer,but I had the same issue and I fixed it by updating the packages, specifically : ggplot2, scales. according to this Rstudio site
Start with install.packages("devtools") then install.packages("rlang").
I'm getting the following error when I'm loading tidyverse. It was all working fine
a few minutes ago when I was running my shinyapp. How should I resolve this?
Error: package or namespace load failed for ‘tidyverse’ in
loadNamespace(i, c(lib.loc, .libPaths()), versionCheck = vI[[i]]):
namespace ‘rlang’ 0.3.0.1 is already loaded, but >= 0.3.1 is required
I had the same problem but managed to tackle it. You may remove the current version of rlang using the following command:
remove.packages("rlang")
and then install the rlang again:
install.packages("rlang")
After that run the library:
library(tidyverse)
I know this is an old question but I faced this same problem. I restarted R session and it worked fine after that. Hope this helps someone! :)
In addition to unloading and reloading rlang,
Click on Tools in the tab and check for Package Updates to update tidyverse
Also had similar problem but resolved it after a struggle. I used:-
devtools::install_github("tidyverse/tidyverse")
I have just encountered the similar problem.
The error could translate into understandable English as:
package 'rlang' version 0.3.0.1 is loaded into R successfully, but the other package that based on 'ralng' required a higher version (at least 0.3.1).
So that manually install.packages('rlang') will update the latest appropriate package 'rlang'
I know this might be late answer,but I had the same issue and I fixed it by updating the packages, specifically : ggplot2, scales. according to this Rstudio site
Start with install.packages("devtools") then install.packages("rlang").
I'm getting the following error when I'm loading tidyverse. It was all working fine
a few minutes ago when I was running my shinyapp. How should I resolve this?
Error: package or namespace load failed for ‘tidyverse’ in
loadNamespace(i, c(lib.loc, .libPaths()), versionCheck = vI[[i]]):
namespace ‘rlang’ 0.3.0.1 is already loaded, but >= 0.3.1 is required
I had the same problem but managed to tackle it. You may remove the current version of rlang using the following command:
remove.packages("rlang")
and then install the rlang again:
install.packages("rlang")
After that run the library:
library(tidyverse)
I know this is an old question but I faced this same problem. I restarted R session and it worked fine after that. Hope this helps someone! :)
In addition to unloading and reloading rlang,
Click on Tools in the tab and check for Package Updates to update tidyverse
Also had similar problem but resolved it after a struggle. I used:-
devtools::install_github("tidyverse/tidyverse")
I have just encountered the similar problem.
The error could translate into understandable English as:
package 'rlang' version 0.3.0.1 is loaded into R successfully, but the other package that based on 'ralng' required a higher version (at least 0.3.1).
So that manually install.packages('rlang') will update the latest appropriate package 'rlang'
I know this might be late answer,but I had the same issue and I fixed it by updating the packages, specifically : ggplot2, scales. according to this Rstudio site
Start with install.packages("devtools") then install.packages("rlang").
I accidentally deleted my old version of ggplot2, so I downloaded the new version, and when I use
library(ggplot2)
I get the following error:
Error in loadNamespace(i, c(lib.loc, .libPaths()), versionCheck = vI[[i]]) :
there is no package called ‘colorspace’
Error: package or namespace load failed for ‘ggplot2’
Does anyone know how to fix this? I tried reinstalling the older version of ggplot2 in both R 3.0.2 and R 3.0.1 (where it previously worked!) and it says the package is not available.
If anyone has a solution to how to fix the loading of the new version or how to get the old version work again, I would be indebted - I really need to plot something with ggplot!!
Cheers
Install the missing colorspace package by executing the following line in R:
install.packages("colorspace")
I fixed it by installing Tk and Tktable in my linux machine.