I have more than one jupyter file to test, with the framework testbook.
Does anyone know how to alter the path, so that i can for example test every file in a folder?
Related
I am using Robot Framework, to run 50 Testcases. Everytime its creating following three files as expected:
c:\users\<user>\appdata\local\output.xml
c:\users\<user>\appdata\local\log.html
c:\users\<user>\appdata\local\report.html
But when I run same robot file, these files will be removed and New log files will be created.
I want to keep all previous run logs to refer in future. Log files should be saved in a folder with a time-stamp value in that.
NOTE: I am running robot file from command prompt (pybot test.robot). NOT from RIDE.
Could any one guide me on this?
Using the built-in features of robot
The robot framework user guide has a section titled Timestamping output files which describes how to do this.
From the documentation:
All output files listed in this section can be automatically timestamped with the option --timestampoutputs (-T). When this option is used, a timestamp in the format YYYYMMDD-hhmmss is placed between the extension and the base name of each file. The example below would, for example, create such output files as output-20080604-163225.xml and mylog-20080604-163225.html:
robot --timestampoutputs --log mylog.html --report NONE tests.robot
To specify a folder, this too is documented in the user guide, in the section Output Directory, under Different Output Files:
...The default output directory is the directory where the execution is started from, but it can be altered with the --outputdir (-d) option. The path set with this option is, again, relative to the execution directory, but can naturally be given also as an absolute path...
Using a helper script
You can write a script (in python, bash, powershell, etc) that performs two duties:
launches pybot with all the options you wan
renames the output files
You then just use this helper script instead of calling pybot directly.
I'm having trouble working out how to create a timestamped directory at the end of the execution. This is my script it timestamps the files, but I don't really want that, just the default file names inside a timestamped directory after each execution?
CALL "C:\Python27\Scripts\robot.bat" --variable BROWSER:IE --outputdir C:\robot\ --timestampoutputs --name "Robot Execution" Tests\test1.robot
You may use the directory creation for output files using the timestamp, like I explain in RIDE FAQ
This would be in your case:
-d ./%date:~-4,4%%date:~-10,2%%date:~-7,2%
User can update the default output folder of the robot framework in the pycharm IDE by updating the value for the key "OutputDir" in the Settings.py file present in the folder mentioned below.
..ProjectDirectory\venv\Lib\site-packages\robot\conf\settings.py
Update the 'outputdir' key value in the cli_opts dictionary to "str(os.getcwd()) + "//Results//Report" + datetime.datetime.now().strftime("%d%b%Y_%H%M%S")" of class _BaseSettings(object):
_cli_opts = {
# Update the abspath('.') to the required folder path.
# 'OutputDir' : ('outputdir', abspath('.')),
'OutputDir' : ('outputdir', str(os.getcwd()) + "//Results//Report_" + datetime.datetime.now().strftime("%d%b%Y_%H%M%S") + "//"),
'Report' : ('report', 'report.html'),
Is there any possibility in IAR to add additional project variable like $PROJ_DIR$ to specify my project environment?
I like to keep my project portable and adaptable.
Of course there are, according to the manuals:
Variable / Description
$CONFIG_NAME$ The name of the current build configuration, for example Debug or Release.
$CUR_DIR$ Current directory
$CUR_LINE$ Current line
$DATE$ Today’s date
$EW_DIR$ Top directory of IAR Embedded Workbench, for example c:\program files\iar systems\embedded workbench 6.n
$EXE_DIR$ Directory for executable output
$FILE_BNAME$ Filename without extension
$FILE_BPATH$ Full path without extension
$FILE_DIR$ Directory of active file, no filename
$FILE_FNAME$ Filename of active file without path
$FILE_PATH$ Full path of active file (in Editor, Project, or Message window)
$LIST_DIR$ Directory for list output
$OBJ_DIR$ Directory for object output
$PROJ_DIR$ Project directory
$PROJ_FNAME$ Project filename without path
$PROJ_PATH$ Full path of project file
$TARGET_DIR$ Directory of primary output file
$TARGET_BNAME$ Filename without path of primary output file and without extension
$TARGET_BPATH$ Full path of primary output file without extension
$TARGET_FNAME$ Filename without path of primary output file
$TARGET_PATH$ Full path of primary output file
$TOOLKIT_DIR$ Directory of the active product, for example c:\program files\iar systems\embedded workbench 6.n\arm
$USER_NAME$ Your host login name
$ENVVAR$ The environment variable ENVVAR. Any name within $_ and _$ will
be expanded to that system environment variable.
If you go to Tools > Configure Custom Argument Variables you can add variables that you can address with $VARIABLE_NAME$. Not sure if that's exactly what you were looking for.
As a caution, if you are using IarBuild.exe to build from the command line, the workspace or global values set from "Configure Custom Arguments Variables" are not included in the project files (.ewp) and thus is not expanded by IarBuild.exe at build time. This is not an issue if you only use the IDE to build.
I found a reason for my problem (but it givs another one):
I define a windows "path-variable" like LIB_PATH and put it in the IAR project file with $_LIB_PATH_$.This works as long until i save the IAR-project. Then IAR sets all paths realive to $PROJ_DIR$ :-(
I'm working in Rstudio and have multiple scripts open that have different working directories; however, each working directory exists within a larger folder on my computer (see below). Is it possible to add these scripts to an Rstudio Project without reorganizing all my files and changing each script's working directory?
File structure on computer:
Folder A
~~Folder 1
~~Folder 2
~~Folder 3
Say I have 3 scripts open, each with a working directory of either Folder 1, 2, or 3. Can I create a project that incorporates all three scripts. Say, set working directory to "Folder A"
Thanks much.
Technically, you can change working directory programmatically within a project, but this is considered a very poor practice and is strongly recommended against. However, you can set working directory at a project's top level (full path to Folder A, in your example) and then refer to scripts and objects, located in Folders 1-3 via corresponding relative paths. For example: "./Folder1/MyScript.R" or "./Folder2/MyData.csv".
It should be possible to create a project in the larger folder. You could even construct a simple master script in Folder A to manage this workflow:
setwd("./Folder 1")
source("scriptx")
setwd("..")
setwd("./Folder 2")
source("scripty")
setwd("..")
setwd("./Folder 3")
source("scriptz")
setwd("..")
Compared to source("Folder 1/scriptx") which runs each script within Folder A the master script would be running each script within it's own folder. Just make sure to use setwd("..") after running code in each folder and you can even run code in between to save output to the main Folder A.
If your workflow always creates folders in this manner I don't see how this would not be reproducible if you used relative paths. Albeit platform dependent, this modified version would create folders on the fly and run scripts kept in Folder A.
system("mkdir Folder_1")
setwd("./Folder_1")
source("../Folder A/scriptx")
setwd("..")
Notice here that when running terminal commands in R, it is recommended avoid spaces in directory or file names.
How to get the robot generated log file name and log directory.
I want to write a post process script, which can process the output XML file generated by robot.
${LOG FILE}
Gives you absolute path to the log file.
${SUITE SOURCE}
Gives you absolute path to the suite file.
${OUTPUT DIR}
Gives you absolute path to the output directory.
http://robotframework.googlecode.com/hg/doc/userguide/RobotFrameworkUserGuide.html?r=2.8.4#automatic-variables
The easiest thing is to tell robot where you want the file to be, then you don't have to figure it out. Use the output directory command line option --outputdir. Unless you tell it where to put the output files, they will go into the current working directory.
If neither one of those works, you can capture the output of robot, and the last three lines will tell you the location of the output.xml, log.html and report.html files.
I try to understand PHPUnit tests in Netbeans. I set correct phpunit.bat path and the phpunit-skelgen.bat file as well.
When I try to create test for some file, using the netbeans option such us "create test file" I get correct directory structure, but the files are placed incorrectly.
Next, following the tutorials from web I set the test folder (to jobeet/tests), the phpunit bootstrap to jobeet\app\bootstrap.php.cache and the xml configuration file to jobeet\app\phpunit.xml.dist
Please see the screenshots below