I receive an error when installing RQDA on Windows 10.
I had run RQDA successfully, then a package wouldn't load and I deleted and tried to reinstall RQDA with these instructions: http://rqda.r-forge.r-project.org/.
Since then, I receive errors pointing towards RGtk2 and GTK+.
I tried loading RQDA both using the newest and older versions of R and RStudio. I tried on 3 different Windows computers.
Here is the link that shows the RQDA package was recently archived:
https://cran.r-project.org/web/packages/RQDA/index.html
The archive points towards requiring gWidgets, so I made sure the library of gWidgets loads successfully, which it does, as does library(gWidgetsRGtk2).
I also took care to install RTools4.0 for R 4.0.0 (https://cran.r-project.org/bin/windows/Rtools/).
I made sure GTK+ is on my PATH. (Path: %GTK_BASEPATH%\bin;) (GTK_PATH: C:\GTK).
I also tried loading RQDA and dependencies manually, but that's a never ending process.
Here is the error I receive:
Failed to load RGtk2 dynamic library, attempting to install it.
Please install GTK+ from http://ftp.gnome.org/pub/gnome/binaries/win64/gtk+/2.22/gtk+-bundle_2.22.1-20101229_win64.zip
If the package still does not load, please ensure that GTK+ is installed and that it is on your PATH environment variable
IN ANY CASE, RESTART R BEFORE TRYING TO LOAD THE PACKAGE AGAIN
Error in getOption("encoding") : Knotenstack-Überlauf
Zusätzlich: Warnmeldung:
Failed to load RGtk2 dynamic library, attempting to install it.
Please install GTK+ from http://ftp.gnome.org/pub/gnome/binaries/win64/gtk+/2.22/gtk+-bundle_2.22.1-20101229_win64.zip
If the package still does not load, please ensure that GTK+ is installed and that it is on your PATH environment variable
IN ANY CASE, RESTART R BEFORE TRYING TO LOAD THE PACKAGE AGAIN
Error: package or namespace load failed for 'RGtk2':
.onLoad in loadNamespace() für 'RGtk2' fehlgeschlagen, Details:
Aufruf: NULL
Fehler: Knotenstack-Überlauf
Fehler: Paket 'RGtk2' konnte nicht geladen werden
Zusätzlich: Warnmeldung:
Failed to load RGtk2 dynamic library, attempting to install it.
Ausführung angehalten
ERROR: lazy loading failed for package 'RQDA'
* removing 'C:/Users/haunschild/Documents/R/win-library/4.0/RQDA'
Warning in install.packages :
installation of package ‘RQDA_0.3-1.tar.gz’ had non-zero exit status
Trying to install RGtk2, I receive the following:
Error in inDL(x, as.logical(local), as.logical(now), ...) :
kann shared object 'C:/Users/haunschild/Documents/R/win-library/4.0/RGtk2/libs/x64/RGtk2.dll' nicht laden:
LoadLibrary failure: %1 ist keine zulässige Win32-Anwendung.
versuche URL 'http://ftp.gnome.org/pub/gnome/binaries/win64/gtk+/2.22/gtk+-bundle_2.22.1-20101229_win64.zip'
Content type 'application/zip' length 25830230 bytes (24.6 MB)
downloaded 24.6 MB
Learn more about GTK+ at http://www.gtk.org
If the package still does not load, please ensure that GTK+ is installed and that it is on your PATH environment variable
IN ANY CASE, RESTART R BEFORE TRYING TO LOAD THE PACKAGE AGAIN
Lade nötiges Paket: cairoDevice
Warnmeldungen:
1: Failed to load RGtk2 dynamic library, attempting to install it.
2: In dir.create(config_path, recursive = TRUE) :
'C:\Users\haunschild\Documents\R\win-library\4.0\RGtk2\gtk\x64\etc\gtk-2.0' existiert bereits
> detach("package:RGtk2", unload = TRUE)
Fehler: Paket ‘RGtk2’ wird von ‘gWidgetsRGtk2’ benötigt, wird deshalb nicht detached ("Is needed by gWidgetsRGTk2', is therefore not detached")
> library(RGtk2)
I also tried:
pkgFile <- "RQDA_0.3-1.tar.gz"
download.file(url = url, destfile = pkgFile)
# Install dependencies
install.packages(c("DBI","RSQLite","RGtk2","gWidgets","gWidgetsRGtk2"))
# Install package
install.packages(pkgs=pkgFile, type="source", repos=NULL)
# Delete package tarball
unlink(pkgFile)
An received the same RGTk2 error loop.
Any help would be greatly appreciated! Thanks!
I've got RQDA working in Windows after:
install.packages(c("gWidgets", "RGtk2", "igraph","plogr","bit","RSQLite"),depen=T)
To install "gWidgetsRGtk2" it was needed:
Download GTK+: http://ftp.gnome.org/pub/gnome/binaries/win32/gtk+/2.22/gtk+-bundle_2.22.1-20101227_win32.zip
Create an empty folder like c:\opt\
Unzip the content of that file in the folder created. You'll have something like c:\opt\gtk+-bundle_2.22.1-20101227_win32. The name of this folder can be changed.
Then add c:\opt\gtk+-bundle_2.22.1-20101227_win32\bin to your PATH
To add the bin folder to the PATH: right-click on "My Computer" and select "Properties", then "Advanced" tab, then "Environment Variables". Select the "PATH" variable and then "Edit" Add "c:\opt\gtk+-bundle_2.22.1-20101227_win32\bin" to the items in the PATH variable.
PS. Make sure you have no other versions of GTK+ in PATH.
So You can run the following code:
url <- "https://cran.r-project.org/src/contrib/Archive/gWidgetsRGtk2/gWidgetsRGtk2_0.0-86.tar.gz"
pkgFile <- "gWidgetsRGtk2_0.0-86.tar.gz"
download.file(url = url, destfile = pkgFile)
install.packages(pkgs=pkgFile, type="source", repos=NULL)
Once the "gWidgetsRGtk2" is installed, you can run the following command to install RQDA:
install.packages("RQDA",repos="http://R-Forge.R-project.org", type="source")
REFERENCES
https://rqda.r-forge.r-project.org/
https://github.com/krlmlr/r-appveyor/issues/48
We've been discussing this issue at : https://github.com/Ronggui/RQDA/issues/38
Some have reported success installing it and have given feedback on how to do it.
Some contributors are working to port RQDA to gWidgets2. May be one of their solutions works for you.
Good luck.
After I gave the answer above I tryed to install it my self and this was as far as I've got using RKWard 0.7.1b, on VM with MsWins10.
https://rkward.kde.org/
with R 3.6.3 in RKWard library (I had RQDA working before. So I uninstalled RKWard and deleted the library directory on C:\Program Files):
https://cran.r-project.org/bin/windows/base/old/3.6.3
and RTools35
https://cran.r-project.org/bin/windows/Rtools/history.html
also installed.
install.packages(c("gWidgets", "gWidgetsRGtk2", "RGtk2", "igraph","plogr","bit","RSQLite"),depen=T)
update.packages(ask = FALSE, checkBuilt = TRUE)
library(RGtk2)
Selected GTK+
Restarted RKWard
Installing ""RQDA_0.3-1.tar.gz", type = "source"", gave me an error: "Failed to load RGtk2 dynamic library, attempting to install it". But by chance, I just saw the post by #JanMarvin and it worked!!!
install.packages("https://cran.r-project.org/src/contrib/Archive/RQDA/RQDA_0.3-1.tar.gz", type = "source", INSTALL_opts = "--no-multiarch")
Then I ran:
update.packages(ask = FALSE, checkBuilt = TRUE)
And then
library (RQDA)
And it worked!!
If anyone could please refine it or give other suggestions as how to install it on MsWin, would be very much appreciated!
Thanks to #sjewo and #JanMarvin for their hard work!! porting this package to R 4.
These steps update the previous to install RQDA. I'm using Windows 10, and this code was run on April-17, 2021:
Use R version 3.6.3, 32 bits. If possible, also install Rstudio;
Run install.packages("gWidgets", repos="http://R-Forge.R-project.org");
Run install.packages(c("RGtk2","igraph","plogr","bit","RSQLite","cairoDevice"),depen=T);
Run library("RGtk2") . An error message will appear, asking you to install GTK+. Select it and press OK;
Restart R. Then run library("RGtk2") again to see if everything is OK;
Create the folder C:\GTK;
Go to https://download.gnome.org/binaries/win32/gtk+/2.22/ and download the file gtk+-bundle_2.22.1-20101227_win32.zip in C:\GTK;
Unpack the downloaded file in C:\GTK;
Go to the System environment and add to system variables C:\GTK\bin to your PATH;
Restart Windows;
Run the following code:
url <- "https://cran.r-project.org/src/contrib/Archive/gWidgetsRGtk2/gWidgetsRGtk2_0.0-86.1.tar.gz"
pkgFile <- "gWidgetsRGtk2_0.0-86.1.tar.gz"
download.file(url = url, destfile = pkgFile)
install.packages(pkgs=pkgFile, type="source", repos=NULL);
Finally, run install.packages("RQDA",repos="http://R-Forge.R-project.org", type="source");
Enjoy!!!
FWIW, I've written a package called RQDAassist that I and my team use to help with RQDA, including installing the CRAN archive on R 4.0. Check it out and if there's any problem, do post an issue. To do the step-wise installation of RQDA
RQDAassist::install()
That's it.
Also, I noticed that active development is ongoing by RQDA maintainers, so I expect (hope) this issue to be resolved soon.
I have successfully installed Rtools and devtools but am getting an error message when I try to install papaja from github
I have already tried:
1) Reinstalled both R and Rstudio so I have the latest versions.
2) Googled the error message but no answers.
3) Downloaded the papaja package from github and tried installing it from my local hard drive
4) unzipped it and re-zipped it with 7-zip, then tried to install it again from local hard drive
Code used is:
devtools::install_github("crsh/papaja")
But installation does not complete. Error message I receive is:
Error in utils::download.file(url, path, method = method, quiet = quiet, :
cannot open URL 'https://api.github.com/repos/crsh/papaja/tarball/master'
I use R 3.4.3, And I need to install devtools::install_github("rstudio/rmarkdown"). But the following installation error comes up.
Downloading GitHub repo rstudio/rmarkdown#master
from URL https://api.github.com/repos/rstudio/rmarkdown/zipball/master
Installation failed: zip file 'C:\Users\Buster\AppData\Local\Temp\RtmpWyl4FP\file3bc6c571eec.zip' cannot be opened
Warning messages:
1: GitHub repo contains submodules, may not function as expected!
2: In utils::unzip(src, exdir = target) :
error 1 in extracting from zip file
How can I install this?
this has been resolved. I used devtools::install_url("http://cran.r-project.org/src/contrib/rmarkdown_1.9.tar.gz")
As explained in the README for rmarkdown:
If you are working within RStudio then you can simply install the
current release of RStudio (both the rmarkdown package and pandoc are
included).
If you want to use the rmarkdown package outside of RStudio then you
can install the package from CRAN as follows:
install.packages("rmarkdown")
This is a much more concise way of doing:
devtools::install_url("http://cran.r-project.org/src/contrib/rmarkdown_1.9.tar.gz")
I'm trying to install a package from github for R with devtools package.
But I'm encountering Timeout error from curl each time!
install_github('ramhiser/datamicroarray')
Error in curl::curl_fetch_disk(url, x$path, handle = handle) :
Timeout was reached
Any Idea why this happens? Any help will be appreciated.
When I want to download this package it also takes long to get a connection but in the end it works as expected. Another possibility is to download the zip file and then install it.
To install the package after downloading, the following code works:
install.packages("/address/to/zip-package", repos = NULL, type="source")
and write the address of the downloaded package in place of /address/to/zip-package, or use RStudio and Packages -> Install.
I try to install the package RSelenium:
devtools::install_github("ropensci/RSelenium")
This gives me following error:
Downloading GitHub repo ropensci/RSelenium#master
from URL https://api.github.com/repos/ropensci/RSelenium/zipball/master
Installing RSelenium
Error: Found continuation line starting ' <!DOCTYPE html PUB ...' at begin of record.
Some research thaught me that I can simple install it using
install.packages("RSelenium, type="Source").
This indeed successfully installs the package, but gives trouble when using the function getPageSource() as mentioned here.
EDIT: I'd also like to add that before the package installed successfully, but at one point it suddenly kept on failing.