I am following instructions in wayland's gitlab website to build it on Ubuntu 20.04. But I got an error at the "meson build" step:
Program dot found: NO
doc/meson.build:1:0: ERROR: Program 'dot' not found
I have tried installing graphviz using apt-get, pydot using pip3, but still receive the above error. What else should I install?
If you don't need the documentation built, just running meson setup $builddir -Ddocumentation=false will turn off the documentation, and thus the need for dot.
But it's confusing that graphviz isn't fixing the problem, since that is the Debian/Ubuntu package with dot in it.
Related
To preface this question I am coming from the perspective of an absolute beginner, trying to learn Julia. I was recommended to try the SciML tutorial and in trying to install it have fallen at the first hurdle.
So far I have:
Installed Julia
Installed Anaconda
Installed Jupyter Notebook
Added "git" through the Anaconda console
Added "IJulia"
From here I have been able to open Jupyter through Anaconda and access Julia 1.7.3 within it. Following this I attempted to follow the instructions on the SciML website for getting started with the tutorial, which is to enter this code:
using Pkg
pkg"add https://github.com/SciML/SciMLTutorials.jl"
using SciMLTutorials
SciMLTutorials.open_notebooks()
However, the second line is throwing this error
invalid git HEAD (reference 'refs/heads/master' not found)
I have also tried installing the package through the Julia console, but recieve the same error.
I am at a loss of how to proceed - I can't find anything in the documentation that suggests why this may be or how to proceed - since I am so new to this I suspect I may have missed a step in my installation process, but can't figure out where that may be.
I have added a package Relief.jl to my environment. I have also checked if it's available by typing stand it's listed under available packages for the environment. However when I type using Relief I get the following error,
ERROR: ArgumentError: Package Relief [e59a39ae-ffc4-11ea-35a5-2b2996f35250] is required but does not seem to be installed:
- Run Pkg.instantiate() to install all recorded dependencies.
Any ideas what I should do to resolve this?
You need to run the command: ] build "name of package" in the terminal. This should fix the problem.
(Without the speech marks. That is just to highlight its a name)
I'm trying to install Apache Zeppelin on my old computer that runs Ubuntu. So far, I'm able to install Zeppelin very easily by cloning the latest 0.6.0 snapshot release using
git clone https://github.com/apache/incubator-zeppelin.git
cd incubator-zeppelin
mvn clean package -DskipTests
but I want to have R on Zeppelin. Supposedly, the 0.6.0 snapshot has two R interpreters, but when I run the R tutorial (the pre-made note that uses %r), I get this list of errors.
I followed several guides to try and install R as an interpreter, but each one resulted in some kind of error. I tried this instructional:
http://www.r-bloggers.com/interactive-data-science-with-r-in-apache-zeppelin-notebook/, and got a build failure on "R Interpreter". The error message was
"dependency 'evaluate' is not available for package 'rzeppelin'
* removing '/home/rebecca/Zeppelin-With-R/R/lib/rzeppelin'"
and then a bit lower down
Failed to execute goal org.codehaus.mojo:exec-maven-plugin:1.2.1:exec (default) on project zeppelin-zrinterpreter: Command execution failed. Process exited with an error: 1
I also tried this Stack Overflow guide: Anyone tried to add R interpreter onto Apache Zeppelin?, and while I was able to run incubator-zeppelin, I received an error when I used either the %spark.r or %r interpreter tags, saying both "interpreter not found" and "prefix not found". Spark doesn't work either after following the first solution, getting the same error mentioned in the second solution (the jar file not being there), and then trying the second solution.
Does anyone have a guide for installing R onto the newest version of Zeppelin? I'm very flexible in the way I can install it. I can run other operating systems onto my computer, and I also have Virtual Box installed on my other computer, which is a mac.
There is currently a bug in the latest HEAD of zeppelin that was recently introduced and prevents the R interpreter from launching cleanly
Did anyone created a Zeppelin Jira Issue for that?
For me it is working on Zeppelin branch-0.6
build Zeppelin with r profile: -DskipTests -Prthis will...
create a directory 'R' in git repo root
copy the 'zeppelin-rinterpreter*.jar' into git_repo_root/interpreter/spark
build Zeppelin with build distro profile: e.g. -DskipTests -Pbuild-distr -Pspark-1.6 -Phadoop-2.6
use zeppelin-distribution/target/zeppelin*.tar.gz for installation
ensure both 1.1 and 1.2 are present in your zeppelin installation
The error you're getting is that you need to have the R package evaluate installed. You can install this simply by launching R and typing install.packages('evaluate').
That said, your excerpt mentions the directory Zeppelin-with-R. That's my repo, which is the R interpreter in the form when it was accepted into Zeppelin. That is version 0.5.6, not 0.6.0. There is currently a bug in the latest HEAD of zeppelin that was recently introduced and prevents the R interpreter from launching cleanly. Your best bet for now is to use the one from my repo and install clean, without trying to pull-in from Zeppelin HEAD.
I am trying to set up IJulia on my PC, but after I get it running I get the constant messages that "kernel has died" and there is a problem with ZMQ library.
Trying to rebuild or reinstall ZMQ does not work. I get an error:
================================[ BUILD ERRORS ]================================
WARNING: ZMQ had build errors.
- packages with build errors remain installed in C:\Users\Gisaev\.julia\v0.3
- build the package(s) and all dependencies with `Pkg.build("ZMQ")`
- build a single package by running its `deps/build.jl` script
Trying to execute build.jl by line (part that correspond to windows) I get the error "Provider PackageManager faild to satisfy dependency zmq."
I am kind of lost here, because ZMQ is obviously correctly installed and working for IPython - IPython notebooks work just fine; I have a fresh installation from Anaconda.
Try to run
Pkg.build("ZMQ")
to see what happens.
If there are warnings about "libpgm" and "zeromq32", you can delete the lib directories and then try to build ZMQ again.
rm -rf /Users/username/.julia/v0.x/Homebrew/deps/usr/Cellar/zeromq32/3.2.5
rm -rf /Users/username/.julia/v0.x/Homebrew/deps/usr/Cellar/libpgm/5.2.122
Pkg.build("ZMQ")
This will correctly build the libpgm and zeromq32 you needed.
(I suppose the operation system is OS X. If you are using Windows, please refer to Installing ZMQ on Windows 7+ seems to require admin privileges #69.)
I have spent a lot of time trying to solve this, but still no luck. I am trying to get Rgraphviz to work with R 2.14.1 on a Max OS X Lion
These are the steps I took in order to install and use Rgraphviz on Mac OS X Lion:
Installed graphviz via: sudo port install graphviz
Checked that the installation was successful : pkg-config --modversion libgvc
Result: 2.28.0 <- That means its OK
Under R 2.14.1
source("http://www.bioconductor.org/biocLite.R")
biocLite("Rgraphviz")
Whenever I try to use the library I get the following error
Error : .onLoad failed in loadNamespace() for 'Rgraphviz', details:
call: value[[3L]](cond)
error: unable to load shared object '/Library/Frameworks/R.framework/Versions/2.14/Resources/library/Rgraphviz/libs/i386/Rgraphviz.so':
dlopen(/Library/Frameworks/R.framework/Versions/2.14/Resources/library/Rgraphviz/libs/i386/Rgraphviz.so, 6): Library not loaded: /usr/local/lib/libgvc.5.dylib
Referenced from: /Library/Frameworks/R.framework/Versions/2.14/Resources/library/Rgraphviz/libs/i386/Rgraphviz.so
Check that (1) graphviz is installed on your system; (2) the installed version of
graphviz matches '2.26.3'; this is the version used to build this Rgraphviz
package; (3) graphviz is accessible to R, e.g., the path to the graphviz 'bin'
directory is in the system 'PATH' variable. See additional instructions in the
'README' file of the Rgraphviz 'source' distribution, available at
Some things I notice
The graphviz suggested in the "help" file is 2.26.3 and the graphviz installed by Mac Ports is 2.28.0, but as it is a newer version I don't think this makes a difference, and besides I can not find v 2.26.3
Suggestion number (3) seems to be the key, but I can't find/don't have a bin directory under graphbiz
Also when I run a locate Rgraphviz.so there are no results.
Any clue towards a solution will be much appreciated,
Thanks a lot!
Thanks for the final answer, the installation seems to work for me! (I still have to check that the package runs properly). Just a quick observation: Graphviz was installed in /usr/local on my machine so that the above command had to be entered as follows:
sudo R CMD INSTALL --configure-args='--with-graphviz=/usr/local' Rgraphviz_1.32.0.tar.gz
One more fail point. If you used Fink to install graphviz, you may still, like me, encounter separate build errors even after you use the configure arguments to point to graphviz, which now look like:
R CMD INSTALL --configure-args='--with-graphviz=/sw' Rgraphviz_1.34.0.tar.gz
The installation will fail during build errors for LL_funcs.c because it is looking for libraries that do not install unless you ALSO install graphviz-dev. You will see this:
In file included from LL_funcs.c:1:
common.h:31:17: error: gvc.h: No such file or directory
common.h:32:22: error: gvplugin.h: No such file or directory
common.h:35:20: error: gvcext.h: No such file or directory
common.h:39:20: error: gvcjob.h: No such file or directory
followed by many more build errors of course. Just be sure to
fink install graphviz-dev