While unzipping iFix file downloaded from Support Fix Central then it shows corrupted.
In case of any Sterling File Gateway iFix file with .zip extension downloaded from IBM Fix Central larger than 4 GB then use jar -xvf <ifix file> instead of unzip.
Related
After installing Artifactory using the RPM installer, where is the Artifactory XML configuration file stored? (The one you can see through the UI at "Admin > Advanced > Config Descriptor")
Have been looking around in "/opt/jfrog/artifactory" and "/etc/opt/jfrog/artifactory" - but havent been able to locate this specific file.
Thanks in advance!
I haven't used the RPM installer, but I've used the Debian installer and the Docker image, and I'd imagine they all put it in the same place:
/var/opt/jfrog/artifactory/etc/artifactory.config.latest.xml
It should also be accessible by symbolic link from:
/opt/jfrog/artifactory/etc/artifactory.config.latest.xml
Other files in that directory in the form of artifactory.config.latest.[numbers].xml are backups or older edits of this file.
I've downloaded Berkeley DB source codes from Oracle's website. After unpacking the zip file, there does not have any files in build_unix directory. There exists an directory which contains sln file for build it on windows using visual studio.
My question is if there is a sample Makefile & Configure script for building this db on unix-like systems such as Linux.
The makefile and configure scripts are located at DB_ROOT/dist/* , DB_ROOT is the root directory of the unzipped source codes.
The build guide is available at https://docs.oracle.com/database/bdb181/html/installation/build_unix.html#build_unix_intro
I have installed Xilinx 14.7 but I'm unable to open its configuration manager even after several trials to put in a license as Xilinx gives me this error:
ERROR:Map:258: - A problem was encountered attempting to get the license for this architecture.
How can I fix this?
You can get the license here:
https://www.xilinx.com/support/licensing_solution_center.html
Once you download the license file (it will have the .lic file extension) you can place it in the .../Xilinx/14.7/ISE_DS/ISE/coregen/core_licenses directory
The exact path to where you need to put it depends on where you installed the software. I installed mine to /opt/ so my path would be /opt/Xilinx/14.7/ISE_DS/ISE/coregen/core_licenses
I want to install the Qt addin for Visual Studio 2015.
From the Qt site I've downloaded the file qt-vs-addin-msvc2015-2.0.0-beta, that's a zip file, but when I unzip it I've a bunch of files and folders and I don't know how to install it.
How can I install this extension?
I am not sure where you got the zip file, you can download the vsix file from here, which can be directly installed in VS as an extension.
Internet Explorer (I'm using v11) and, according to the comments above, the MS Edge browser, rename .vsix files to .zip files when they are downloaded from the qt.io website. This is especially confusing because .vsix files are, in fact, valid .zip files; however, extracting their contents into a folder doesn't provide the user with any method of installing them.
Change the extension on the files from .zip to .vsix and double-click the resulting icon. That should launch the vsix installer.
I have been using phpunit for a while, starting with 3.5.8, subsequently upgrading to 3.5.10 and now on 3.5.11
I wanted to upgrade to 3.5.13 today using the commands:
pear channel-update pear.phpunit.de
pear upgrade phpunit/PHPUnit
Unfortunately pear does upgrade itself only but the upgrade of phpunit fails as seen below. Yes, I am in Administrator mode, so authorizations should not be an issue. I find this all the more strange, as I have performed two successful upgrades previously. Because of this I find it hard to believe it is an issue that is specific to my setup (the development machine is running Windows 7 64Bit).
Has anyone else experienced this issue and can offer a solution?
Output from 'pear upgrade phpunit/PHPUnit':
First run:
>pear upgrade phpunit/PHPUnit
phpunit/PHPUnit requires PEAR Installer (version >= 1.9.2), installed version is
1.9.1
phpunit/PHPUnit can optionally use PHP extension "dbus"
phpunit/File_Iterator requires PEAR Installer (version >= 1.9.2), installed vers
ion is 1.9.1
downloading YAML-1.0.5.tgz ...
Starting to download YAML-1.0.5.tgz (9,966 bytes)
.....done: 9,966 bytes
downloading XML_RPC2-1.0.8.tgz ...
Starting to download XML_RPC2-1.0.8.tgz (67,063 bytes)
...done: 67,063 bytes
downloading PEAR-1.9.2.tgz ...
Starting to download PEAR-1.9.2.tgz (295,120 bytes)
...done: 295,120 bytes
downloading Cache_Lite-1.7.9.tgz ...
Starting to download Cache_Lite-1.7.9.tgz (30,318 bytes)
...done: 30,318 bytes
downloading Console_Getopt-1.3.1.tgz ...
Starting to download Console_Getopt-1.3.1.tgz (4,471 bytes)
...done: 4,471 bytes
upgrade ok: channel://pear.symfony-project.com/YAML-1.0.5
upgrade ok: channel://pear.php.net/Console_Getopt-1.3.1
upgrade ok: channel://pear.php.net/PEAR-1.9.2
upgrade ok: channel://pear.php.net/Cache_Lite-1.7.9
upgrade ok: channel://pear.php.net/XML_RPC2-1.0.8
PEAR: Optional feature webinstaller available (PEAR's web-based installer)
PEAR: Optional feature gtkinstaller available (PEAR's PHP-GTK-based installer)
PEAR: Optional feature gtk2installer available (PEAR's PHP-GTK2-based installer)
PEAR: To install optional features use "pear install pear/PEAR#featurename"
Second Run:
>pear upgrade phpunit/PHPUnit
phpunit/PHPUnit can optionally use PHP extension "dbus"
downloading PHPUnit-3.5.13.tgz ...
Starting to download PHPUnit-3.5.13.tgz (118,553 bytes)
..........................done: 118,553 bytes
could not extract the package.xml file from "C:\Program Files (x86)\Zend\ZendSer
ver\bin\tmp\PHPUnit-3.5.13.tgz" Unable to create directory 'C:/Program/Fil7414.t
mp'
Unable to create path for C:/Program/Fil7414.tmp/package.xml
Download of "phpunit/PHPUnit" succeeded, but it is not a valid package archive
Error: cannot download "phpunit/PHPUnit"
downloading File_Iterator-1.2.6.tgz ...
Starting to download File_Iterator-1.2.6.tgz (3,439 bytes)
...done: 3,439 bytes
could not extract the package.xml file from "C:\Program Files (x86)\Zend\ZendSer
ver\bin\tmp\File_Iterator-1.2.6.tgz" Unable to create directory 'C:/Program/Fil7
675.tmp'
Unable to create path for C:/Program/Fil7675.tmp/package.xml
Download of "phpunit/File_Iterator" succeeded, but it is not a valid package arc
hive
Error: cannot download "phpunit/File_Iterator"
Download failed
upgrade failed
Here is the pear configuration:
C:\Users\Hanno Schupp>pear config-show
PHP Warning: Module 'Zend Data Cache' already loaded in Unknown on line 0
PHP Warning: Zend Extension Manager: Cannot load Zend Data Cache module in Unkn
own on line 0
PHP Warning: Module 'Zend Utils' already loaded in Unknown on line 0
PHP Warning: Zend Extension Manager: Cannot load Zend Utils module in Unknown o
n line 0
CONFIGURATION (CHANNEL PEAR.PHP.NET):
=====================================
Auto-discover new Channels auto_discover <not set>
Default Channel default_channel pear.php.net
HTTP Proxy Server Address http_proxy <not set>
PEAR server [DEPRECATED] master_server pear.php.net
Default Channel Mirror preferred_mirror pear.php.net
Remote Configuration File remote_config <not set>
PEAR executables directory bin_dir C:\Program Files
(x86)\Zend\ZendServer\bin
PEAR documentation directory doc_dir C:\Program Files
(x86)\Zend\ZendServer\bin\docs
PHP extension directory ext_dir C:\Program Files
(x86)\Zend\ZendServer\lib\phpext
PEAR directory php_dir C:\Program Files
(x86)\Zend\ZendServer\bin\pear
PEAR Installer cache directory cache_dir C:\Users\HANNOS~1\AppData\Local\
Temp\pear\cache
PEAR configuration file cfg_dir C:\Program Files
directory (x86)\Zend\ZendServer\bin\cfg
PEAR data directory data_dir C:\Program Files
(x86)\Zend\ZendServer\bin\data
PEAR Installer download download_dir C:\Program Files
directory (x86)\Zend\ZendServer\bin\tmp
PHP CLI/CGI binary php_bin C:\Program Files
(x86)\Zend\ZendServer\bin\.\php.
exe
php.ini location php_ini <not set>
--program-prefix passed to php_prefix <not set>
PHP's ./configure
--program-suffix passed to php_suffix <not set>
PHP's ./configure
PEAR Installer temp directory temp_dir C:\Program Files
(x86)\Zend\ZendServer\bin\tmp
PEAR test directory test_dir C:\Program Files
(x86)\Zend\ZendServer\bin\tests
PEAR www files directory www_dir C:\Program Files
(x86)\Zend\ZendServer\bin\www
Cache TimeToLive cache_ttl 3600
Preferred Package State preferred_state stable
Unix file mask umask 0
Debug Log Level verbose 1
PEAR password (for password <not set>
maintainers)
Signature Handling Program sig_bin c:\gnupg\gpg.exe
Signature Key Directory sig_keydir C:\Program Files
(x86)\Zend\ZendServer\bin\pearke
ys
Signature Key Id sig_keyid <not set>
Package Signature Type sig_type gpg
PEAR username (for username <not set>
maintainers)
User Configuration File Filename C:\Program Files
(x86)\Zend\ZendServer\bin\pear.i
ni
System Configuration File Filename C:\Program Files
(x86)\Zend\ZendServer\bin\pearsy
s.ini
enter code here
Update
As #amateur barista and #Tibor have pointed out, you can apply this same fix without modifying your pear.ini by using the following commands:
> pear config-set temp_dir "C:\tmp"
> pear config-set download_dir "C:\tmp"
Original
I had this same issue on my Windows 7 64-bit machine running WampServer.
It seems that PEAR handles the temp_dir and download_dir variables differently. For download_dir it handles spaces in the path correctly, while for temp_dir it becomes FUBAR'd.
Here are the steps to correct:
Open your pear.ini (mine was: C:\Program Files (x86)\WAMP\bin\php\php5.3.4\pear.ini)
Note: This file is serialize'd so make sure you understand the syntax before changing anything.
Alter the temp_dir and download_dir variables to paths without spaces.
Example (before):
s:8:"temp_dir";s:48:"C:\Program Files (x86)\WAMP\bin\php\php5.3.4\tmp";s:12:"download_dir";s:48:"C:\Program Files (x86)\WAMP\bin\php\php5.3.4\tmp"
Example (after):
s:8:"temp_dir";s:6:"C:\tmp";s:12:"download_dir";s:6:"C:\tmp"
All done! Try your install command again.
Presumably, you probably only need to alter one of the paths in pear.ini but this is how I got it working.
The command llnes to modify pear config attributes
pear config-set temp_dir "C:\tmp"
pear config-set download_dir "C:\tmp"
From the error message, Unable to create directory 'C:/Program/Fil7675.tmp', it looks like it's chopping Files off the configured temporary file path. I don't know where PEAR installs on Windows, but it seems like it's trying to create a folder under "C:/Program Files/PEAR" but chops off everything after the space.
Actually, it looks like it's stuffing part of Files into the new path.