I'm having issues getting some modules to install. I've been able to get mod-1v1-arena and mod-npc-free-professions working, but I haven't been able to get these other modules to work:
mod-new-character-perks
mod-learn-spells
mod-quick-teleport
Can someone please confirm I have the correct workflow, or advise on what steps I'm missing.
Clone module folder from git to .\azerothcore-wotlk\modules
Run Git CLI: ./acore.sh docker build
Copy mod_learnspells.conf to .\azerothcore-wotlk\env\docker\etc\modules
I see instructions about rebuilding with CMake, is that necessary if I'm using docker build...? I tried CMake too and I got an error immediately with the software setup, so haven't pursued it further.
I'm also a bit confused by the .conf files, which folder does the server read them from?
.\azerothcore-wotlk\env\docker\etc\modules or .\azerothcore-wotlk\modules\mod-learn-spells\conf
I would try to install without any modules to check for the core stability and then work up from there one by one.
This way, if there's a module that's currently not working due to recent PR's like the Autobalance and possibly mod-learn-spells you can report an issue and work without it until It's back up.
AzerothCore Continuous Integration build with modules is currently failing aswell if you check the Readme notes where it says
Related
This is such a noddy question, but I'm struggling to particularly install libadalang which (to avoid X-Y problem) came from me having a working Gnatstudio, installing ada webserver, then I couldn't start Gnatstudio as it required libadalang.so. So I tried to install libadalang and
am currently getting failures of the form
libadalang-iterators-extensions.ads:29:29: file "langkit_support-symbols-precomputed.ads" not found
So I've spammed my /opt/GNAT/2020 with installing langkit everywhere that looks likely.
./lib/langkit_support
./lib/lib/langkit_support
./lib/include/langkit_support
./include/langkit_support
And still the installer for libadalang doesn't work.
Clearly something going on with paths here that I'm not getting. Can anyone provide any information on how paths are supposed to work as I need to install a number of other ada and SPARK-ada libraries from github and I want to do it correctly.
I think, the simplest way to restore GNAT Studio is to delete everything and reinstall. The GNAT Studio has its-own copy of libadalang/langkit. Look for
<install-path>/lib/gnatstudio/libadalang.so
<install-path>/lib/gnatstudio/liblangkit_support.so
When you install a developer version of libadalang you will get another copy of these files. They could have a different version.
I would suggest you to install GNAT Studio into a dedicated directory and make sure you launch it with a shell script from the bin (bin/gnatstudio). This way it shouldn't be affected by any other installed libraries.
Installing AWS shouldn't break GNAT Studio installation. If you know how to reproduce, please report to AdaCore.
I tried to install Simple OAuth (https://www.drupal.org/project/simple_oauth) module in my drupal site running in a shared Godaddy hosting. My first mistake was not to read the installation guide instructing to install the module by using composer. Instead, I installed the module using the Extend=>install a module link within Drupal. Installing the simple_oauth and enabling the module crashed my site and there is no output from the site.
Then I realised there is something wrong with the installation and checked the error log file. The error logged was:
PHP Fatal error: Interface 'League\OAuth2\Server\Repositories\AccessTokenRepositoryInterface' not found in /home/-----------/public_html/drupal/modules/simple_oauth/src/Repositories/AccessTokenRepository.php on line 10
At that point I realised there is something wrong with the installation and checked the module instructions which states I should use composer to install the module. I tried to solve this problem by redoing the installation from the ssh by using composer and this command:
composer config repositories.drupal composer https://packages.drupal.org/8 && composer require drupal/simple_oauth:^3
Which did not work because GoDaddy shared hosting plan has only 512mb of rams and composer kills the command because of lack of memory.
I tried reading through and understand how Composer works. There were recommendations saying you should never use composer in a production site and you should run it on your computer and copy the composer.lock file which needs much less rams. I created a PHP server using XAMMP on my computer and copied the composer.json file to my computer and run composer update command in my computer. It downloaded the dependencies and stuff on my computer. And feeling I get the hang of it, I copied the composer.lock file in my drupal server, run composer update command and saw composer delete many stuff which I could not undo.
So my questions are: 1- Is there a way of rescuing this drupal site at this point? I deleted many composer dependencies as far as I can understand.
The new error log says: PHP Fatal error: Interface 'Symfony\Component\HttpKernel\HttpKernelInterface' not found in /home/--------/public_html/drupal/core/lib/Drupal/Core/DrupalKernelInterface.php on line 15
2- If not, which is fine as I was just beginning to setup the site. Is it possible for someone to explain the best way of handling this scenario? I mean installing a module using composer in a memory critical place. Or explain how composer works for layman. I read about all the dependency stuff but could not figure out how to use it for this scenario.
Thanks.
I tried to install Meteor on another system. Installation go well, then I copied my project and I am running meteor run but
"Extracting meteor-tool#1.4.0-1" it is happening forever. Then I tried to update version number to 1.4.1 and run again "meteor run". Now I do not need to install 1.4.0.1 so it worked but got stuck on extracting on other modules.
Possible reasons can be extraction program of this is release is faulty. Would someone suggest a solution or how can I download 1.4.0.1 release of meteor directly?
https://github.com/meteor/meteor/issues/7688
I found the answer of this problem. This is problem with tar extractor.
I installed the newest 7zip and renamed the tar.exe in my GIT program folder ("where tar" command in cmd revealed, that somehow that exe was associated with .tar archives) to tar.exe.old.
If you can not find where is tar then run "where tar" command to get path of tar.exe
This solves the problem.
Take a look at this answer: https://stackoverflow.com/a/40122752/6861101
Try adding the following to your local hosts file (C:\Windows\System32\Drivers\etc\hosts):
54.192.225.217 warehouse.meteor.com
Then run a meteor reset in your app directory (warning - will wipe your local DB), then try starting your app again.
This worked for me.
I have developed a TideSDK application and am now ready to package it, but I'm having problems with the network type installer.
It always gives me code 404 on the Application first run:
Could not query info: Invalid HTTP Status Code (404)
I presume the installer is having difficulty with reaching the correct servers and downloading the needed runtime, but I have run through most solutions on this forum, and none have worked.
So I tried a bundle packaging, as it should include such runtime, but I must be doing something wrong, since it does not bundle within the MSI.
The code I'm executing is as follows:
C:\TideSDK\sdk\win32\1.2.0.RC6d\tibuild.py -p --type=BUNDLE --os=win32 "C:\path_to_app\app_dir"
I also tried:
C:\TideSDK\sdk\win32\1.2.0.RC6d\tibuild.py -p -t bundle --os=win32 "C:\path_to_app\app_dir"
And all the uppercase/lowercase combinations. Also tried version 1.2.0.4, without sucess. Am I doing something wrong?
the network type installer is not available anymore, since appcelerator has canceled their services for titanium desktop.
So you can only do bundle packaging. Try the following command:
python tibuild.py --dest=. --type=bundle --package=. "c:\path\to\your\app\dir"
This should build and package your app and create a installer for it.
Change "dest" and "package" to the directories where you want to have the built app and installation package.
You can omit the OS parameter, since the builder can only generate builds for the current OS.
I've got a VPS setup with Nginx & PHP5-FPM.
Being fairly new to unix, VPS etc... it took me ages to get the setup I wanted.
However Now I want to be able to install some extensions onto PHP without haveing to rebuild the entire thing. For example. Is there a way to install the php_tidy extension on an existing PHP setup?
You can compile an extensions as a shared library. Then you just have to declare your module in the php.ini.
There is a description at php.net for phpize.
Performance differences between a module and a full compilation are discussed here.
Check out the documentation at http://pecl.php.net/ on how to install PHP extensions.
It's usually as easy as running a command such as
pecl install tidy