I would like to know where is this error code located in the AOT. Would like to know the path to understand the structure and develop custom code.
Transaction has been selected, for settlement, although settlement type: none was selected
I generally use one of two methods to locate message strings.
Provided the cross reference is updated (it should be in dev) use the "Label editor" to to search for then string, see this answer.
Put a breakpoint in top of info.add method, disable CIL if needed, then rerun to get the error message invoking the debugger, see this answer.
Related
I'm creating several commands programmatically and want to avoid having to add key mappings for them explicitly in keymap.cson.
The Flight Manual page for Keymap Manager shows an add method. It doesn't give an example of how to actually use this method, so my guess is that this should work:
atom.keymaps.add('atom-text-editor',{'alt-1':'custom:my-command'});
However, this does not appear to work. When I run this in the developer console, I get this message:
Encountered an invalid key binding when adding key bindings from 'atom-text-editor' 'custom:my-command'.
I got this message even if I changed alt to ctrl.
What does the correct method call on atom.keymaps look like.
I agree, the docs are not detailed enough. However, through trial and error, I managed to figure it out:
atom.keymaps.add('foo', {
'atom-text-editor' : {
'alt-1': 'custom:my-command',
'#': 'application:about'
// etc
}
});
Explanation:
atom.keymaps.add(source, bindings, priority);
The source argument is not the same as what is referred to as the selector in Atom speak. Instead, it's an identifier that can be used to remove the keybindings, should you wish to (except it seems they haven't actually implemented a remove method!).
Instead, the selector should go inside the bindings argument, as shown above.
I'm working on Odoo 10. When I click on the button, get mentioned error.
I want to convert a contact in partner so I need create a new line in another table with the values I put in the .create(vals).
The following links are some extracts of my code , hope you can help me.
my class : model.py
my view : model_view.xml
my error : server trace back
I don't understand your code at all. You inherit a model called test.res.partner and I don't know if you already created it. That may be the issue.
It could be also the fact that you may no be importing your model.py file if this module inherits another one that you have already created.
In general this message indicates that the method convert_prospect does not exist in the model test.res.partner.
But seeing how you write your view (like using xpath in a view that does not inherit from another one) you should rework your fundamentals.
Ah and don't call that prospect() at the end.
I have downloaded the Alexa Skills online tutorial found at:
https://github.com/amzn/alexa-skills-kit-js/blob/master/samples/reindeerGames/src/index.js
and followed (I think) all of the instructions in the tutorial found at:
https://developer.amazon.com/public/community/post/TxDJWS16KUPVKO/New-Alexa-Skills-Kit-Template-Build-a-Trivia-Skill-in-under-an-Hour
This is meant to be a tutorial for first time Alexa Skills developers. My question is, I get this error message once I hit the "Save and Test" button:
errorMessage": "Exception: TypeError: Cannot read property 'application' of undefined"
Does anyone know what the above error means or how to get rid of it?
Thanks v much.
This looks like a javascript error telling you that you are trying to use a property named application on an undefined variable.
JavaScript assigns the value "undefined" to any variable that you use but haven't set yet.
There are a several ways that you can debug problems in your Lambdas. Perhaps the easiest is to review the Logs. To do this:
Go to the Lambda console (where you upload your code to Lambda)
Select the Monitoring tab
Select "View logs in CloudWatch" (in the upper right)
Review the latest log, looking for a reported error in one of your files (typically index.js) and specifically the line number. That should help you find the error.
Note that the time stamps will be GMT, so probably won't match your actual time. This can be confusing if you have multiple entries. But the minutes should match, helping you verify that you're looking at the correct log entry.
A more advanced, and quicker way to debug Lambda problems, is the include a "test" request, and run this each time you upload code to Lambda.
To set this up:
Run one of your defined utterances in the ASK test page under the "Service Simulator" section.
Copy the code displayed below that in the "Lambda Request" section.
Now switch to the Lambda console for your Lambda function
Click the down arrow in the Actions button and select "Configure test event"
Paste the request you copied above into the text field
Click Save and Test.
Now each time you upload new code to Lambda, you can select "Test" and the request that you just saved will be run.
And best of all, the console log will be displayed in the lower right corner, saving you from having to switch to the logs and refresh to view them.
I'm getting the following error when I try to run an ASP.Net page. It just popped up during development, and I don't know what the cause is.
"OverflowException Occurred. Value was either too large or too small for an Int32."
The line the debugger breaks on is of absolutely no help at all
Dim ApproxDate As TextBox = FormView1.FindControl("CurrentResultDateTextBox")
The error is occurring on this line because calling findControl on FormView1 causes it to databind (executes a SQL query to return the dataset). I assume the error lies somewhere in one of the object data sources or possibly one of the grid views on the page, but the debugger won't tell me where. Most of the page data sources are bound declaratively (specified in ASP tags in the source)
Pressing F11 to run past the exception displays the following:
"13712696100373320501120906 is not a valid value for Int32."
The value being shown here is the primary key for the main SQL table used by the page. There are about 10 data sources which use this field. Again, there's no indication of where exactly the error is occurring.
So how can I debug an error like this? Are there commands I can run? IIS error logs? 3rd party software to capture the error? I'll take anything I can get
Managed to find the problem. The trick is to first disable "just my code" in the IDE/Debug settings. Then you can see the system functions on the call stack, and while there is no source code, you can click on these functions to unwind the stack to one of the web controls (in this case the ListControl.PerformSelect function)
If you check the auto variables in the debug window, it will show the control involved in the error. From there I added a watch on the ID property to see which control it was, looked up the data source that feeds it, and found the error.
You can also unwind the stack to the ObjectDataSourceView, look at the dataTable property, and call GetErrors() to see the issues. This returns an array of data rows which are flagging errors; The property RowError will show the error message for any given row.
I'm trying out Specflow for the first time, and have created a VS2010 project with a reference to TechTalk.SpecFlow, as well as nunit.framework. I've added a sample Feature file:
Feature: Addition
In order to avoid silly mistakes
As a math idiot
I want to be told the sum of two numbers
#mytag
Scenario: Add two numbers
Given I have entered 50 into the calculator
And I have entered 70 into the calculator
When I press add
Then the result should be 120 on the screen
When I execuyte the test (using TestDriven.Net), I get the following error:
Test 'T:SpecFlowFeature1' failed: Couldn't find type with name 'SpecFlowFeature1'
System.Exception: Couldn't find type with name 'SpecFlowFeature1'
at MutantDesign.Xml.Documentation.MemberInfoUtilities.FindMemberInfo(Assembly assembly, String cref)
at TestDriven.TestRunner.AdaptorTestRunner.Run(ITestListener testListener, ITraceListener traceListener, String assemblyPath, String testPath)
at TestDriven.TestRunner.ThreadTestRunner.Runner.Run()
Anyone know what I'm missing?
Actually traced this down to how I was running the test. Right clicking the ".feature" file (or anywhere within that file) and selecting "Run Tests" resulted in the error. Right clicking the underlying ".feature.cs" file and selecting "Run Tests" executed correctly. Looks like TestDriven.Net wasn't able to "understand" the "*.feature" file.
I typically start "Couldn't find type..." errors in my references folder and make sure that the library that I'm referencing is being referenced correctly and that the version that's being referenced isn't outdated.
Also, make sure that your SpecFlowFeature1 class isn't mistakenly declared as private. Visual Studio creates new classes (by default) as private and if you don't specify a class as public, it will remain private and not "visible" to outside projects.