Happy New Year!
I have just started to learn Julia and my first mini challenge I have set myself is to scrape data from a large list of URLs.
I have ca 50k URLs (which I successfully parsed from a JSON with Julia using Regex) in a CSV file. I want to scrape each one and return a matched string ("/page/12345/view" - where 12345 is any integer).
I managed to do so using HTTP and Queryverse (although had started with CSV and CSVFiles but looking at packages for learning purposes) but the script seems to stop after just under 2k. I can't see an error such as a timeout.
May I ask if anyone can advise what I'm doing wrong or how I can approach it differently? Explanations/links to learning resources would also be great!
using HTTP, Queryverse
URLs = load("urls.csv") |> DataFrame
patternid = r"\/page\/[0-9]+\/view"
touch("ids.txt")
f = open("ids.txt", "a")
for row in eachrow(URLs)
urlResponse = HTTP.get(row[:url])
if Int(urlResponse.status) == 404
continue
end
urlHTML = String(urlResponse.body)
urlIDmatch = match(patternid, urlHTML)
write(f, urlIDmatch.match, "\n")
end
close(f)
There can be always a server that detects your scraper and intentionally takes a very long time to respond.
Basically, since scraping is an IO intensive operations you should do it using a big number of asynchronous tasks. Moreover this should be combined with the readtimeout parameter of the get function. Hence your code will look more or less like this:
asyncmap(1:nrow(URLs);ntasks=50) do n
row = URLs[n, :]
urlResponse = HTTP.get(row[:url], readtimeout=10)
# the rest of your code comes here
end
Even one some servers are delaying transmission, always many connections will be working.
I am a beginner to programming. I am trying to run a simulation of a combustion chamber using reactingFoam.
I have modified the counterflow2D tutorial.
For those who maybe don't know OpenFOAM, it is a programme built in C++ but it does not require C++ programming, just well-defining the variables in the files needed.
In one of my first tries I have made a very simple model but since I wanted to check it very well I set it to 60 seconds with a 1e-6 timestep.
My computer is not very powerful so it took me for a day aprox. (by this I mean I'd like to find a solution rather than repeating the simulation).
I executed the solver reactingFOAM using 4 processors in parallel using
mpirun -np 4 reactingFOAM -parallel > log
The log does not show any evidence of error.
The problem is that when I use reconstructPar it works perfectly but then I try to watch the results with paraFoam and this error is shown:
From function bool Foam::IOobject::readHeader(Foam::Istream&)
in file db/IOobject/IOobjectReadHeader.C at line 88
Reading "mypath/constant/reactions" at line 1
First token could not be read or is not the keyword 'FoamFile'
I have read that maybe some files are empty when they are not supposed to be so, but I have not found that problem.
My 'reactions' file have not been modified from the tutorial and has always worked.
edit:
Sorry for the vague question. I have modified it a bit.
A typical OpenFOAM dictionary file always contains a Foam::Istream named FoamFile. An example from a typical system/controlDict file can be seen below:
FoamFile
{
version 2.0;
format ascii;
class dictionary;
location "system";
object controlDict;
}
During the construction of the dictionary header, if this Istream is absent, OpenFOAM ceases its operation by raising an error message that you have experienced:
First token could not be read or is not the keyword 'FoamFile'
The benefit of the header is possibly to contribute OpenFOAM's abstraction mechanisms, which would be difficult otherwise.
As mentioned in the comments, adding the header entity almost always solves this problem.
Basically I am working on a python project where I download and index files from the sec edgar database. The problem however, is that when using the requests module, it take a very long time to save the text in a variable (between ~130 and 170 seconds for one file).
The file roughly has around 16 million characters, and I wanted to see if there was any way to easily lower the time it takes to retrieve the text. -- Example:
import requests
url ="https://www.sec.gov/Archives/edgar/data/0001652044/000165204417000008/goog10-kq42016.htm"
r = requests.get(url, stream=True)
print(r.text)
Thanks!
What I found is in the code for r.text, specifically when no encoding was given ( r.encoding == 'None' ). The time spend detecting the encoding was 20 seconds, I was able to skip it by defining the encoding.
...
r.encoding = 'utf-8'
...
Additional details
In my case, my request was not returning an encoding type. The response was 256k in size, the r.apparent_encoding was taking 20 seconds.
Looking into the text property function. It tests to see if there is an encoding. If there is None, it will call the apperent_encoding function which will scan the text to autodetect the encoding scheme.
On a long string this will take time. By defining the encoding of the response ( as described above), you will skip the detection.
Validate that this is your issue
in your above example :
from datetime import datetime
import requests
url = "https://www.sec.gov/Archives/edgar/data/0001652044/000165204417000008/goog10-kq42016.htm"
r = requests.get(url, stream=True)
print(r.encoding)
print(datetime.now())
enc = r.apparent_encoding
print(enc)
print(datetime.now())
print(r.text)
print(datetime.now())
r.encoding = enc
print(r.text)
print(datetime.now())
of course the output may get lost in the printing, so I recommend you run the above in an interactive shell, it may become more aparent where you are losing the time even without printing datetime.now()
From #martijn-pieters
Decoding and printing 15MB of data to your console is often slower than loading data from a network connection. Don't print all that data. Just write it straight to a file.
I know there are other tools around like awstats or splunk, but I wonder whether there is some serious (web)server logfile analysis going on in R. I might not be the first thought to do it in R, but still R has nice visualization capabilities and also nice spatial packages. Do you know of any? Or is there a R package / code that handles the most common log file formats that one could build on? Or is it simply a very bad idea?
In connection with a project to build an analytics toolbox for our Network Ops guys,
i built one of these about two months ago. My employer has no problem if i open source it, so if anyone is interested i can put it up on my github repo. I assume it's most useful to this group if i build an R Package. I won't be able to do that straight away though
because i need to research the docs on package building with non-R code (it might be as simple as tossing the python bytecode files in /exec along with a suitable python runtime, but i have no idea).
I was actually suprised that i needed to undertake a project of this sort. There are at least several excellent open source and free log file parsers/viewers (including the excellent Webalyzer and AWStats) but neither parse server error logs (parsing server access logs is the primary use case for both).
If you are not familiar with error logs or with the difference between them and access
logs, in sum, Apache servers (likewsie, nginx and IIS) record two distinct logs and store them to disk by default next to each other in the same directory. On Mac OS X,
that directory in /var, just below root:
$> pwd
/var/log/apache2
$> ls
access_log error_log
For network diagnostics, error logs are often far more useful than the access logs.
They also happen to be significantly more difficult to process because of the unstructured nature of the data in many of the fields and more significantly, because the data file
you are left with after parsing is an irregular time series--you might have multiple entries keyed to a single timestamp, then the next entry is three seconds later, and so forth.
i wanted an app that i could toss in raw error logs (of any size, but usually several hundred MB at a time) have something useful come out the other end--which in this case, had to be some pre-packaged analytics and also a data cube available inside R for command-line analytics. Given this, i coded the raw-log parser in python, while the processor (e.g., gridding the parser output to create a regular time series) and all analytics and data visualization, i coded in R.
I have been building analytics tools for a long time, but only in the past
four years have i been using R. So my first impression--immediately upon parsing a raw log file and loading the data frame in R is what a pleasure R is to work with and how it is so well suited for tasks of this sort. A few welcome suprises:
Serialization. To persist working data in R is a single command
(save). I knew this, but i didn't know how efficient is this binary
format. Thee actual data: for every 50 MB of raw logfiles parsed, the
.RData representation was about 500 KB--100 : 1 compression. (Note: i
pushed this down further to about 300 : 1 by using the data.table
library and manually setting compression level argument to the save
function);
IO. My Data Warehouse relies heavily on a lightweight datastructure
server that resides entirely in RAM and writes to disk
asynchronously, called redis. The proect itself is only about two
years old, yet there's already a redis client for R in CRAN (by B.W.
Lewis, version 1.6.1 as of this post);
Primary Data Analysis. The purpose of this Project was to build a
Library for our Network Ops guys to use. My goal was a "one command =
one data view" type interface. So for instance, i used the excellent
googleVis Package to create a professional-looking
scrollable/paginated HTML tables with sortable columns, in which i
loaded a data frame of aggregated data (>5,000 lines). Just those few
interactive elments--e.g., sorting a column--delivered useful
descriptive analytics. Another example, i wrote a lot of thin
wrappers over some basic data juggling and table-like functions; each
of these functions i would for instance, bind to a clickable button
on a tabbed web page. Again, this was a pleasure to do in R, in part
becasue quite often the function required no wrapper, the single
command with the arguments supplied was enough to generate a useful
view of the data.
A couple of examples of the last bullet:
# what are the most common issues that cause an error to be logged?
err_order = function(df){
t0 = xtabs(~Issue_Descr, df)
m = cbind( names(t0), t0)
rownames(m) = NULL
colnames(m) = c("Cause", "Count")
x = m[,2]
x = as.numeric(x)
ndx = order(x, decreasing=T)
m = m[ndx,]
m1 = data.frame(Cause=m[,1], Count=as.numeric(m[,2]),
CountAsProp=100*as.numeric(m[,2])/dim(df)[1])
subset(m1, CountAsProp >= 1.)
}
# calling this function, passing in a data frame, returns something like:
Cause Count CountAsProp
1 'connect to unix://var/ failed' 200 40.0
2 'object buffered to temp file' 185 37.0
3 'connection refused' 94 18.8
The Primary Data Cube Displayed for Interactive Analysis Using googleVis:
A contingency table (from an xtab function call) displayed using googleVis)
It is in fact an excellent idea. R also has very good date/time capabilities, can do cluster analysis or use any variety of machine learning alogorithms, has three different regexp engines to parse etc pp.
And it may not be a novel idea. A few years ago I was in brief email contact with someone using R for proactive (rather than reactive) logfile analysis: Read the logs, (in their case) build time-series models, predict hot spots. That is so obviously a good idea. It was one of the Department of Energy labs but I no longer have a URL. Even outside of temporal patterns there is a lot one could do here.
I have used R to load and parse IIS Log files with some success here is my code.
Load IIS Log files
require(data.table)
setwd("Log File Directory")
# get a list of all the log files
log_files <- Sys.glob("*.log")
# This line
# 1) reads each log file
# 2) concatenates them
IIS <- do.call( "rbind", lapply( log_files, read.csv, sep = " ", header = FALSE, comment.char = "#", na.strings = "-" ) )
# Add field names - Copy the "Fields" line from one of the log files :header line
colnames(IIS) <- c("date", "time", "s_ip", "cs_method", "cs_uri_stem", "cs_uri_query", "s_port", "cs_username", "c_ip", "cs_User_Agent", "sc_status", "sc_substatus", "sc_win32_status", "sc_bytes", "cs_bytes", "time-taken")
#Change it to a data.table
IIS <- data.table( IIS )
#Query at will
IIS[, .N, by = list(sc_status,cs_username, cs_uri_stem,sc_win32_status) ]
I did a logfile-analysis recently using R. It was no real komplex thing, mostly descriptive tables. R's build-in functions were sufficient for this job.
The problem was the data storage as my logfiles were about 10 GB. Revolutions R does offer new methods to handle such big data, but I at last decided to use a MySQL-database as a backend (which in fact reduced the size to 2 GB though normalization).
That could also solve your problem in reading logfiles in R.
#!python
import argparse
import csv
import cStringIO as StringIO
class OurDialect:
escapechar = ','
delimiter = ' '
quoting = csv.QUOTE_NONE
parser = argparse.ArgumentParser()
parser.add_argument('-f', '--source', type=str, dest='line', default=[['''54.67.81.141 - - [01/Apr/2015:13:39:22 +0000] "GET / HTTP/1.1" 502 173 "-" "curl/7.41.0" "-"'''], ['''54.67.81.141 - - [01/Apr/2015:13:39:22 +0000] "GET / HTTP/1.1" 502 173 "-" "curl/7.41.0" "-"''']])
arguments = parser.parse_args()
try:
with open(arguments.line, 'wb') as fin:
line = fin.readlines()
except:
pass
finally:
line = arguments.line
header = ['IP', 'Ident', 'User', 'Timestamp', 'Offset', 'HTTP Verb', 'HTTP Endpoint', 'HTTP Version', 'HTTP Return code', 'Size in bytes', 'User-Agent']
lines = [[l[:-1].replace('[', '"').replace(']', '"').replace('"', '') for l in l1] for l1 in line]
out = StringIO.StringIO()
writer = csv.writer(out)
writer.writerow(header)
writer = csv.writer(out,dialect=OurDialect)
writer.writerows([[l1 for l1 in l] for l in lines])
print(out.getvalue())
Demo output:
IP,Ident,User,Timestamp,Offset,HTTP Verb,HTTP Endpoint,HTTP Version,HTTP Return code,Size in bytes,User-Agent
54.67.81.141, -, -, 01/Apr/2015:13:39:22, +0000, GET, /, HTTP/1.1, 502, 173, -, curl/7.41.0, -
54.67.81.141, -, -, 01/Apr/2015:13:39:22, +0000, GET, /, HTTP/1.1, 502, 173, -, curl/7.41.0, -
This format can easily be read into R using read.csv. And, it doesn't require any 3rd party libraries.
Need to know how to print a Time variable in Ada. I assume there is no portable way because Time is implementation defined. I've already seen the GNAT.Calendar.Formatting package available under GNAT, I'd also be interested in a GHS for VME.
See package "Ada.Calendar.Formatting" function "Image" for Ada2005. If you have an Ada95 compiler you could and this package isn't available, try my implementation from here
This was written using GNAT 3.15p, so pretty old.
Sure, time output can be portable, Ada.Calendar contains standard functions that extract the components of a time value, so it's straightforward to put together your own conversion package.
For example, here's one. One just needs to either create a minor addition to create a "Formatted_Time" record for a given Time value (see the package's Get_Time() function for guidance), or make Main_Formatter() visible in the package spec.
Generally what I do is use Calendar.Split and then do a 'image on the parts I care about.
Here's an example that displays the date and time using the GNAT.Calendar.Time_IO package:
with ada.calendar;
with gnat.calendar.time_io;
procedure display_time is
begin
gnat.calendar.time_io.put_time(ada.calendar.clock, "Date: %Y/%m/%d Time: %H:%M:%S");
end display_time;
Date/time format options are available here:
https://en.wikibooks.org/wiki/Ada_Programming/Libraries/GNAT.Calendar.Time_IO