I added a database reference to a visual studio 2019 database project. It was built by another developer, but that shouldn't matter. I point to the dacpac file and select "Same Database" as my database location and check the box to suppress reference warnings and click OK.
The resulting properties that show on that dacpac say that suppress reference warnings = false and I can no longer build my project because of reference errors.
It did not keep my selection for the suppress reference warnings setting and it will NOT let me change it back to true in the properties. I've tried to remove the reference and add it back again, the same result.
Is there something that can fix this? Some setting or something that is causing this behavior?
Related
I have to extend report's query to add a new field.
I've created extension of a query, joined required datasources and can see new field in the list of fields.
For some reason the report in the AOT is displaying with red cross sign:
In properties i can see error in metadata: "There was an error reading metadata. Make sure the metadata xml file(s) are accessible, are well formed and are not corrupted with duplicate or missing xml elements.
The exception message is: Element named: 'Copy1' of type 'ModelElement' already exists among elements: 'Copy1'.
Parameter name: item
Additional information:
AOT/Reports/Reports/WHSInvent"
There is an .xml of that object in packages local directory, there are no any duplicate names in any node of that report.
Any ideas how it can be fixed?
I've run into this before and there are a two things that come to mind.
Often times it's due to an incorrect merge where changes are merged and metadata is accidentally duplicated (in your case it's possible there are two xml nodes with the same name/id in the .rdl file)
If this report is checked in with corrupt metadata, you need to manually modify the RDL file, which is not great, but hopefully the error contains enough hints. Open the report rdl file in your favourite editor (report likely located in a similar path as this: K:\AosService\PackagesLocalDirectory\YOURMODEL\Reports) and look for an xml node with an attribute Name="Copy1". With luck, you have two duplicate nodes next to each other due to the merge. Remove the offending duplicate node, save, and refresh the AOT in Visual Studio.
If the error is in your local changes only (xml file is corrupted for whatever reason) and you are sure that your source control contains the correct version and you simply wish to overwrite the local contents with the source controlled version, follow these steps. Note: this will overwrite local changes.
First, undo pending changes.
Then force a get latest:
I have a table with different methods, for example, one of them is validateWrite, when setting Field A to value X, Field B and C has to be filled in.
Suddenly (without changing code, I have compared the code with the test enviroment, it does work there) the validateWrite has stopped working.
I have tried to recompile the table, but that did not work.
Any idea why it suddenly (without making other modifications in this enviroment, or generating a CIL) stopped working and what i can try to solve it?
If some piece of code is calling table.doInsert(), it skips the validateWrite() method.
If the environments are truly identical, then I would try closing your AX client and deleting your user caches (see http://dynamics-ax-live.blogspot.com/2010/03/more-information-about-auc-file.html) where you delete all of the *.auc files located at C:\Users\[Username]\AppData\Local
In addition to what that tells you to delete, I'd also remove the *.kti file and all of the files & folders inside of C:\Users\[UserName]\AppData\Local\Microsoft\Dynamics Ax
Then open AX, see if the problem still exists. Then full system compile, CIL build, and delete your usage data.
The preferred route though would be to just drop a breakpoint in and debug the code to see what the execution stack is.
I have been working on a project in Visual Studio, C# language and I found an error described above. How can I remove this error?
"Either 'GDI', 'WPF' or 'SILVERLIGHT' must be defined"
Open the project properties for the project that throws the error (Alt+Enter in VS Solution Explorer), go to the Build tab and enter the symbol you want into the "Conditional compilation symbols" field. Enter one of the three values.
It seems the value got lost. I cannot tell you which value got lost. Check one of the other PDFsharp projects (I hope not all projects lost their symbols).
I've been trying to figure out how to programmatically add files to an Xcode4 project and it seemed like AppleScript would be the way to go, however I'm running into "missing value" errors.
Here's the code I've got:
tell application "Xcode"
set theProject to first project
set theTarget to first target of theProject
set theBuildPhase to compile sources phase of theTarget
tell first group of theProject
set theFileRef to make new file reference with properties {full path:"/Users/jeff/Projects/XcodeTest/XcodeTest/MyViewController.h", name:"MyViewController.h", path:"XcodeTest/MyViewController.h", path type:group relative}
add theFileRef to theProject
end tell
--tell theBuildPhase to make new build file with properties {build phase:theBuildPhase, name:"MyViewController.h", file reference:theFileRef, target:theTarget, project:theProject}
end tell
I've tried the commented-out line instead of the add-command as well, but that doesn't work either (I get "missing value").
The 'add' error is:
error "Xcode got an error: file reference id \"251AD3431432472E006E300F\" of Xcode 3 group id \"251AD32C14324645006E300F\" of project \"XcodeTest\" of workspace document \"XcodeTest.xcodeproj/project.xcworkspace\" doesn’t understand the add message." number -1708 from file reference id "251AD3431432472E006E300F" of Xcode 3 group id "251AD32C14324645006E300F" of project "XcodeTest" of workspace document "XcodeTest.xcodeproj/project.xcworkspace"
The "make new reference" does add the file to the list of files in Xcode, but I also need it to be added to the project target so that I can add actions and outlets to the file from Xcode w/o having to first check the checkbox to add it to the "target membership".
I ended up sending this question to the devs on the xcode developer list and the response I got was effectively "you can't".
This appears to be completely broken in Xcode4, but I've seen a project that does it. I think what they are doing is parsing and modifying the "project.pbxproj" file directly. (this file is hidden inside the xcodeproj bundle)
The file is a GUID soup, but once you look at it for a while it seems possible to safely modify it, especially if you are only adding stuff.
Edit:
Found this stackoverflow answer that might help.
Tutorial or Guide for Scripting XCode Build Phases
There is a poorly documented user defined build setting that can be added. Files can be both excluded and included from compilation
Go to your target's Build Settings > Tap the + button > Add User-Defined Setting
The key is either INCLUDED_SOURCE_FILE_NAMES or EXCLUDED_SOURCE_FILE_NAMES
The value is a space separated list of file paths
See reference:
http://lists.apple.com/archives/xcode-users/2009/Jun/msg00153.html
I'm trying out Specflow for the first time, and have created a VS2010 project with a reference to TechTalk.SpecFlow, as well as nunit.framework. I've added a sample Feature file:
Feature: Addition
In order to avoid silly mistakes
As a math idiot
I want to be told the sum of two numbers
#mytag
Scenario: Add two numbers
Given I have entered 50 into the calculator
And I have entered 70 into the calculator
When I press add
Then the result should be 120 on the screen
When I execuyte the test (using TestDriven.Net), I get the following error:
Test 'T:SpecFlowFeature1' failed: Couldn't find type with name 'SpecFlowFeature1'
System.Exception: Couldn't find type with name 'SpecFlowFeature1'
at MutantDesign.Xml.Documentation.MemberInfoUtilities.FindMemberInfo(Assembly assembly, String cref)
at TestDriven.TestRunner.AdaptorTestRunner.Run(ITestListener testListener, ITraceListener traceListener, String assemblyPath, String testPath)
at TestDriven.TestRunner.ThreadTestRunner.Runner.Run()
Anyone know what I'm missing?
Actually traced this down to how I was running the test. Right clicking the ".feature" file (or anywhere within that file) and selecting "Run Tests" resulted in the error. Right clicking the underlying ".feature.cs" file and selecting "Run Tests" executed correctly. Looks like TestDriven.Net wasn't able to "understand" the "*.feature" file.
I typically start "Couldn't find type..." errors in my references folder and make sure that the library that I'm referencing is being referenced correctly and that the version that's being referenced isn't outdated.
Also, make sure that your SpecFlowFeature1 class isn't mistakenly declared as private. Visual Studio creates new classes (by default) as private and if you don't specify a class as public, it will remain private and not "visible" to outside projects.