I started the installation of the following package https://github.com/deepklarity/jupyter-text2code , but after doing the following two commands:
git clone https://github.com/deepklarity/jupyter-text2code.git
cd jupyter-text2code
pip install .
git clone https://github.com/deepklarity/jupyter-text2code.git
export JUPYTER_TEXT2CODE_MODE="cpu"
cd jupyter-text2code
pip install .
I now want to remove it. Whenever I try to open jupyter notebook it takes forever to load and i get the following message screen shot
To uninstall the plugin, please run the following command in the terminal/console:
pip uninstall mopp
We will update the readme and update the instructions.
Related
I'm trying to build an HTML-page of my Jupyter notebook. I tried to run jupyter-book build mybookname but the command can't be found.
I tried to also install jupyter-book using the command pip install jupyter-book and added jupyter-book file path to environment variables, but I still can't build my book.
What should I do?
MY jupyter notebook didn't work after installing and calling in CMD.
then i only use "pip install simplejson" in command prompt (cmd) . Then i write "jupyter notebook" and it work!
someone uses "pip uninstall simplejson" before "pip install simplejson".
Maybe python needs to reinstall something (pip install/unistall).
I recently installed dotnet 5.0 on Pop OS but whenever I try to use it it says that I don't have permission.
For example, if I just try to run the command dotnet it gives the the message
cannot snap-exec: cannot exec "/snap/dotnet-sdk/144/snap/command-chain/snapcraft-runner": permission denied
When I run the command as the root user it works perfectly fine.
I don't know if this is because I installed dotnet as a snap package
I had the same issue and unfortunately the dotnet issue page was not working.
To fix this issue I had to install the package with apt instead of snap.
sudo snap remove dotnet-sdk // if needed
wget https://packages.microsoft.com/config/ubuntu/20.04/packages-microsoft-prod.deb -O packages-microsoft-prod.deb
sudo dpkg -i packages-microsoft-prod.deb
sudo apt update
sudo apt install apt-transport-https
sudo apt-get install -y dotnet-sdk-5.0
Remove snap first
sudo snap remove dotnet-sdk
Manually download Dotnet SDK https://dotnet.microsoft.com/en-us/download/dotnet/6.0
When your download completes, open the terminal and run the following commands to extract the SDK to make the commands available at the terminal.
mkdir -p $HOME/dotnet && tar zxf dotnet-sdk-6.0.101-linux-x64.tar.gz -C $HOME/dotnet
export DOTNET_ROOT=$HOME/dotnet
export PATH=$PATH:$HOME/dotnet
one last thing
Edit shell profile to permanently
While installing LabelImg in M1 Mac using below command
pip install pyqt5 lxml
This is the error I got
ERROR: pyqt5 from https://files.pythonhosted.org/packages/7c/5b/e760ec4f868cb77cee45b4554bf15d3fe6972176e89c4e3faac941213694/PyQt5-5.14.0.tar.gz#sha256=0145a6b7de15756366decb736c349a0cb510d706c83fda5b8cd9e0557bc1da72 has a pyproject.toml file that does not comply with PEP 518: 'build-system.requires' contains an invalid requirement: 'sip >=5.0.1 <6'
How to install lableImg annotation tool in M1 Mac?
I got it to work by using the following commands
brew install pyqt#5
pip install labelimg
And that's it, it just works
You just need to type labelimg in the Terminal and the app will start running
I don't know why they don't tell you this in the installation guide
Alrighty!
On MacOS Monterey, none of the other solutions posted here solved this problem for me. However, I managed to easily solve the issue, without a virtual environment or too much fiddling about like so:
Firstly, you have to download all labelImg packages from this link:
https://github.com/tzutalin/labelImg#macos
(You can download it as a .zip file or clone it)
Unzip and then in your terminal cd into whatever directory you downloaded the above files to.
Then run the following commands in order:
pyrcc5 -o libs/resources.py resources.qrc
Then,
pip3 install lxml
Finally,
python3 labelImg.py
It should run without an issue now.
You can go one of two ways:
Using brew:
You can use homebrew to install the dependencies - like qt and libxml2. This will let your package manager handle everything and generally should solve the problem with the . Then you can run
python3 labelimg.py
Using Virtual Environments:
This is the more recommended way to go about in such cases. You can use conda, pipenv or venv to create a virtual environment which is isolated from your system python installation. Then you can try to install it as explained in the README.rst in the root of the repository:
brew install python3
pip3 install pipenv
pipenv run pip install pyqt5==5.12.1 lxml
pipenv run make qt5py3
pipenv run python3 labelImg.py
[Optional] rm -rf build dist; python setup.py py2app -A;mv "dist/labelImg.app" /Applications
You can try the two methods and and get back with the errors if there are any.
This is my note.
I just succeed on my Mac M1 Chip
CHECK THIS OUT!
Installation of labelimg on mac m1 chip
my first reference
my second reference
First, you must use terminal with rosetta version
Then, you already have python3
Then...
[Done]
# check where python3 is
$ where python3
# create env
$ /usr/bin/python3 -m venv env
# check env is
$ where env
# activate env list
$ source env/bin/activate
# updated to the newest
$ pip install --upgrade pip
# installation of PyQt5
$ pip install PyQt5
# start to run labelImg.py
$ cd Documents/repos/labelImg
$ pip3 install pyqt5 lxml
$ make qt5py3
# [run ok!!]
$ python3 labelImg.py
Using Conda
Create a virtual environment in conda and activate it
conda create -n venv
conda activate venv
Install pyqt using conda
conda install pyqt
Install lxml using pip
pip install lxml
Change directory to the downloaded/cloned labelImg folder
cd path/to/labelImg/folder/
Make qt5py3
make qt5py3
Run LabelImg
python labelImg.py
I am trying to install Cloudera on Centos7, when I install it using the command sudo ./cloudera-manager-installer.bin, it shows the message that
Cloudera Manager 5 is already installed. please uninstall it (by running /usr/share/cmf/uninstall.sh) before attempting to install it again.
When I try uninstalling it by running sudo /usr/share/cmf/uninstall.sh , it shows
No such file or directory
I tried uninstalling everything using the script, sudo yum remove 'cloudera-manager-*'
and then removed the guid file:
sudo rm /var/lib/cloudera-scm-agent/cm_guid
And tried reinstalling it, but it still shows the same Fatal error meesage as seen above. Can someone please help?
I removed the folder cmf using rm -rf /usr/share/cmf and its working, thanks.
I installed wordcloud via conda in Windows 64
conda install -c conda-forge word cloud
but that is python 3.4.
I want to install word cloud in python 3.6
but i did search the google.
but it is not effect. so please teach me....
Anaconda Python 3.6 version
For Windows
==== Installation of wordcloud package ====
download wordcloud‑1.3.2‑cp36‑cp36m‑win_amd64.whl from http://www.lfd.uci.edu/~gohlke/pythonlibs/#wordcloud
Copy the file to your current working directory
Open command prompt from Tools
python -m pip install wordcloud-1.3.2-cp36-cp36m-win_amd64.whl
It should work now
For MAC
pip install wordcloud
There is a solution, you can download a third party package for Python 3. Following the below steps helped me solve the problem.
Wordcloud_successful_install
Download wordcloud‑1.3.2‑cp36‑cp36m‑win_amd64.whl from http://www.lfd.uci.edu/~gohlke/pythonlibs/#wordcloud
Copy the file to your current working directory
Open command prompt from Tools
Python -m pip install wordcloud-1.3.2-cp36-cp36m-win_amd64.whl
This will work:
1. create virEnv: conda create -n yourenvname python=3.5 anaconda
2. source activate yourenvname
3. conda install -c conda-forge wordcloud
Install wordcloud from the following page:
https://pypi.org/project/wordcloud/
Note: command: pip install wordcloud
Note: run the above command in Anaconda cmd prompt
Pre-requisities for instaling wordcloud is to install Visual C++(I got this error to install. So, you may give a try).This requires almost 4GB space. Once installed, restart your machine and then try the 1st step. It should be successful this time.
Ok. I solved my issue using wheels. Here are the steps:
Download the .whl file compatible with your Python version and your windows distribution (32bit or 64bit) from here https://www.lfd.uci.edu/~gohlke/pythonlibs/#wordcloud
cd to the file path
Run this command python -m pip install