Renewal Function for Weibull Distribution - r

Question

The renewal function for Weibull distribution m(t) with t = 10 is given as below.
I want to find the value of m(t). I wrote the following r code to compute m(t)
last_term = NULL
gamma_k = NULL
n = 50
for(k in 1:n){
gamma_k[k] = gamma(2*k + 1)/factorial(k)
}
for(j in 1: (n-1)){
prev = gamma_k[n-j]
last_term[j] = gamma(2*j + 1)/factorial(j)*prev
}
final_term = NULL
find_value = function(n){
for(i in 2:n){
final_term[i] = gamma_k[i] - sum(last_term[1:(i-1)])
}
return(final_term)
}
all_k = find_value(n)
af_sum = NULL
m_t = function(t){
for(k in 1:n){
af_sum[k] = (-1)^(k-1) * all_k[k] * t^(2*k)/gamma(2*k + 1)
}
return(sum(na.omit(af_sum)))
}
m_t(20)
The output is m(t) = 2.670408e+93. Does my iteratvie procedure correct? Thanks.

Answer 1

I don't think it will work. First, lets move Γ(2k+1) from denominator of m(t) into Ak. Thus, Ak will behave roughly as 1/k!.
In the nominator of the m(t) terms there is t2k, so roughly speaking you're computing sum with terms
100k/k!
From Stirling formula
k! ~ kk, making terms
(100/k)k
so yes, they will start to decrease and converge to something but after 100th term
Anyway, here is the code, you could try to improve it, but it breaks at k~70
N <- 20
A <- rep(0, N)
# compute A_k/gamma(2k+1) terms
ps <- 0.0 # previous sum
A[1] = 1.0
for(k in 2:N) {
ps <- ps + A[k-1]*gamma(2*(k-1) + 1)/factorial(k-1)
A[k] <- 1.0/factorial(k) - ps/gamma(2*k+1)
}
print(A)
t <- 10.0
t2 <- t*t
r <- 0.0
for(k in 1:N){
r <- r + (-t2)^k*A[k]
}
print(-r)
UPDATE
Ok, I calculated Ak as in your question, got the same answer. I want to estimate terms Ak/Γ(2k+1) from m(t), I believe it will be pretty much dominated by 1/k! term. To do that I made another array k!*Ak/Γ(2k+1), and it should be close to one.
Code
N <- 20
A <- rep(0.0, N)
psum <- function( pA, k ) {
ps <- 0.0
if (k >= 2) {
jmax <- k - 1
for(j in 1:jmax) {
ps <- ps + (gamma(2*j+1)/factorial(j))*pA[k-j]
}
}
ps
}
# compute A_k/gamma(2k+1) terms
A[1] = gamma(3)
for(k in 2:N) {
A[k] <- gamma(2*k+1)/factorial(k) - psum(A, k)
}
print(A)
B <- rep(0.0, N)
for(k in 1:N) {
B[k] <- (A[k]/gamma(2*k+1))*factorial(k)
}
print(B)
shows that
I got the same Ak values as you did.
Bk is indeed very close to 1
It means that term Ak/Γ(2k+1) could be replaced by 1/k! to get quick estimate of what we might get (with replacement)
m(t) ~= - Sum(k=1, k=Infinity) (-1)k (t2)k / k! = 1 - Sum(k=0, k=Infinity) (-t2)k / k!
This is actually well-known sum and it is equal to exp() with negative argument (well, you have to add term for k=0)
m(t) ~= 1 - exp(-t2)
Conclusions
Approximate value is positive. Probably will stay positive after all, Ak/Γ(2k+1) is a bit different from 1/k!.
We're talking about 1 - exp(-100), which is 1-3.72*10-44! And we're trying to compute it precisely summing and subtracting values on the order of 10100 or even higher. Even with MPFR I don't think this is possible.
Another approach is needed

Answer 2

OK, so I ended up going down a pretty different road on this. I have implemented a simple discretization of the integral equation which defines the renewal function:
m(t) = F(t) + integrate (m(t - s)*f(s), s, 0, t)
The integral is approximated with the rectangle rule. Approximating the integral for different values of t gives a system of linear equations. I wrote a function to generate the equations and extract a matrix of coefficients from it. After looking at some examples, I guessed a rule to define the coefficients directly and used that to generate solutions for some examples. In particular I tried shape = 2, t = 10, as in OP's example, with step = 0.1 (so 101 equations).
I found that the result agrees pretty well with an approximate result which I found in a paper (Baxter et al., cited in the code). Since the renewal function is the expected number of events, for large t it is approximately equal to t/mu where mu is the mean time between events; this is a handy way to know if we're anywhere in the neighborhood.
I was working with Maxima (http://maxima.sourceforge.net), which is not efficient for numerical stuff, but which makes it very easy to experiment with different aspects. At this point it would be straightforward to port the final, numerical stuff to another language such as Python.
Thanks to OP for suggesting the problem, and S. Pappadeux for insightful discussions. Here is the plot I got comparing the discretized approximation (red) with the approximation for large t (blue). Trying some examples with different step sizes, I saw that the values tend to increase a little as step size gets smaller, so I think the red line is probably a little low, and the blue line might be more nearly correct.
Here is my Maxima code:
/* discretize weibull renewal function and formulate system of linear equations
* copyright 2020 by Robert Dodier
* I release this work under terms of the GNU General Public License
*
* This is a program for Maxima, a computer algebra system.
* http://maxima.sourceforge.net/
*/
"Definition of the renewal function m(t):" $
renewal_eq: m(t) = F(t) + 'integrate (m(t - s)*f(s), s, 0, t);
"Approximate integral equation with rectangle rule:" $
discretize_renewal (delta_t, k) :=
if equal(k, 0)
then m(0) = F(0)
else m(k*delta_t) = F(k*delta_t)
+ m(k*delta_t)*f(0)*(delta_t / 2)
+ sum (m((k - j)*delta_t)*f(j*delta_t)*delta_t, j, 1, k - 1)
+ m(0)*f(k*delta_t)*(delta_t / 2);
make_eqs (n, delta_t) :=
makelist (discretize_renewal (delta_t, k), k, 0, n);
make_vars (n, delta_t) :=
makelist (m(k*delta_t), k, 0, n);
"Discretized integral equation and variables for n = 4, delta_t = 1/2:" $
make_eqs (4, 1/2);
make_vars (4, 1/2);
make_eqs_vars (n, delta_t) :=
[make_eqs (n, delta_t), make_vars (n, delta_t)];
load (distrib);
subst_pdf_cdf (shape, scale, e) :=
subst ([f = lambda ([x], pdf_weibull (x, shape, scale)), F = lambda ([x], cdf_weibull (x, shape, scale))], e);
matrix_from (eqs, vars) :=
(augcoefmatrix (eqs, vars),
[submatrix (%%, length(%%) + 1), - col (%%, length(%%) + 1)]);
"Subsitute Weibull pdf and cdf for shape = 2 into discretized equation:" $
apply (matrix_from, make_eqs_vars (4, 1/2));
subst_pdf_cdf (2, 1, %);
"Just the right-hand side matrix:" $
rhs_matrix_from (eqs, vars) :=
(map (rhs, eqs),
augcoefmatrix (%%, vars),
[submatrix (%%, length(%%) + 1), col (%%, length(%%) + 1)]);
"Generate the right-hand side matrix, instead of extracting it from equations:" $
generate_rhs_matrix (n, delta_t) :=
[delta_t * genmatrix (lambda ([i, j], if i = 1 and j = 1 then 0
elseif j > i then 0
elseif j = i then f(0)/2
elseif j = 1 then f(delta_t*(i - 1))/2
else f(delta_t*(i - j))), n + 1, n + 1),
transpose (makelist (F(k*delta_t), k, 0, n))];
"Generate numerical right-hand side matrix, skipping over formulas:" $
generate_rhs_matrix_numerical (shape, scale, n, delta_t) :=
block ([f, F, numer: true], local (f, F),
f: lambda ([x], pdf_weibull (x, shape, scale)),
F: lambda ([x], cdf_weibull (x, shape, scale)),
[genmatrix (lambda ([i, j], delta_t * if i = 1 and j = 1 then 0
elseif j > i then 0
elseif j = i then f(0)/2
elseif j = 1 then f(delta_t*(i - 1))/2
else f(delta_t*(i - j))), n + 1, n + 1),
transpose (makelist (F(k*delta_t), k, 0, n))]);
"Solve approximate integral equation (shape = 3, t = 1) via LU decomposition:" $
fpprintprec: 4 $
n: 20 $
t: 1;
[AA, bb]: generate_rhs_matrix_numerical (3, 1, n, t/n);
xx_by_lu: linsolve_by_lu (ident(n + 1) - AA, bb, floatfield);
"Iterative solution of approximate integral equation (shape = 3, t = 1):" $
xx: bb;
for i thru 10 do xx: AA . xx + bb;
xx - (AA.xx + bb);
xx_iterative: xx;
"Should find iterative and LU give same result:" $
xx_diff: xx_iterative - xx_by_lu[1];
sqrt (transpose(xx_diff) . xx_diff);
"Try shape = 2, t = 10:" $
n: 100 $
t: 10 $
[AA, bb]: generate_rhs_matrix_numerical (2, 1, n, t/n);
xx_by_lu: linsolve_by_lu (ident(n + 1) - AA, bb, floatfield);
"Baxter, et al., Eq. 3 (for large values of t) compared to discretization:" $
/* L.A. Baxter, E.M. Scheuer, D.J. McConalogue, W.R. Blischke.
* "On the Tabulation of the Renewal Function,"
* Econometrics, vol. 24, no. 2 (May 1982).
* H(t) is their notation for the renewal function.
*/
H(t) := t/mu + sigma^2/(2*mu^2) - 1/2;
tx_points: makelist ([float (k/n*t), xx_by_lu[1][k, 1]], k, 1, n);
plot2d ([H(u), [discrete, tx_points]], [u, 0, t]), mu = mean_weibull(2, 1), sigma = std_weibull(2, 1);