i'm trying since hours to install a custom module on IIS from the manager.
I coded it in C#.
I'm able to load it into a test ASP.NET app that i created.
I copy it into the bin folder, and add this line into the web.config :
<system.webServer>
<modules>
<add name="Module" type="IISExtend.Module"/>
</modules>
</system.webServer>
It works.
To add it to IIS, i tried :
Put the output DLL into the bin folder of the root of the website, like this : https://i.gyazo.com/14b54742cc758d6083a9787df8a8cbe1.png
Add it in the module list like this : https://i.gyazo.com/b686a505c8d4785ffb63d5c384580ac5.png
But i get this warning : https://i.gyazo.com/b137ecca9369cc53018aecd7409d8737.png
I already tried to edit config files manually, sign the dll, add it to global store, change the .NET version, and it changes nothing.
The module does not loads, and seems not installed.
Here the exact name of my class : https://i.gyazo.com/10973b6852e1d1de139641905bee2b19.png
Thank you very much for your help :)
I found a solution.
I installed a lot of windows features, regarding ASP.NET and ASP.NET core under IIS section.
I worked.
Thank you for your help.
Related
I have an ASP.NET application that runs fine on my local machine. I just uploaded it to a server using web deploy. I'm getting the following error when I try to view the site:
The following errors occurred while attempting to load the app.
- The OwinStartup attribute discovered in assembly 'Gators3' referencing startup type 'Gators3.Startup' conflicts with the attribute in assembly 'MyFirstProject2' referencing startup type 'MyFirstProject2.Startup' because they have the same FriendlyName ''. Remove or rename one of the attributes, or reference the desired type directly.
To disable OWIN startup discovery, add the appSetting owin:AutomaticAppStartup with a value of "false" in your web.config.
To specify the OWIN startup Assembly, Class, or Method, add the appSetting owin:AppStartup with the fully qualified startup class or configuration method name in your web.config.
I tried searching the entire solution for the string "MyFirstProject2" but did not come up with anything. The message gives a couple of suggestions, but none of them mean anything to me. I don't know how to "Remove or rename one of the attributes, or reference the desired type directly," and I don't see a place in the web.config to "add the appSetting owin:AppStartup with the fully qualified startup class or configuration method name in your web.config."
I found this, but am not quite sure how to implement it. I also did find [assembly: OwinStartupAttribute(typeof(Gators3.Startup))] in my Startup.cs, but not sure what the right thing to do there is either.
The problem is that the Gators3.dll and MyFirstProject2.dll are in the same folder (I guess it is bin folder on your server) and both are using Owin middleware. If you do not need MyFirstProject2.dll then the easiest way would be to delete that assembly. If you need it, but without Owin - add following line to Web.config/app.config in your MyFirstProject2 project:
<add key="owin:AutomaticAppStartup" value="False" />
If you need to use Owin for two projects configure friendly names for both of them.
Gators3 project:
Change Owin startup attribute to something like:
attribute [assembly: OwinStartupAttribute("GatorsConfig", typeof(Gators3.Startup))]
And add following line to Web.config within appSettings section:
<add key="owin:appStartup" value="GatorsConfig" />
MyFirstProject2 project:
Change Owin startup attribute to something
like:
attribute [assembly: OwinStartupAttribute("MyFirstProject2Config", typeof(MyFirstProject2.Startup))]
And add following line to Web.config within appSettings section:
<add key="owin:appStartup" value="MyFirstProject2Config" />
I had the same issue : removing everything in the /bin folder and rebuilding the solution alone worked for me. But it could be combined with renaming your assembly attribute at the top of the startupclass, giving it a Firendly name which will help to differentiate both the startup files.
[assembly: OwinStartup("MyFriendlyNameForProject1",typeof(MyProject.Startup))]
Clear your bin folder and obj folder.Rebuild the project again and run :)
Also, if you publish a solution to Azure:
1) right click and select Publish.
2) go to Settings and expand the "File Publish Options"
3) select "Remove additional files at destination"
4) Publish
Worked for me, after deleting the files from obj and bin Folder.
Delete anything that says 'MyFirstProject2' from your bin folder and rebuild the solution, It will work.
Happens when you reference (by mistake?) a project with owin startup inside another project with owin startup. Fix - delete the reference, bin, obj folders and rebuild.
I had the same problem and i added the following tag on web config:
<appSettings>
<add key="owin:AutomaticAppStartup" value="false" />
</appSettings>
This is what I have done:
Since I have 3 projects in one solution, I had to open all bin folder of each project and delete all files there.
Build each project one by one.
Build the whole solution.
Problem solves on my part.
Remove all files in your 'bin' folder and rebuild.
Delete files Bin, Build each project one by one.
Deleted everything in the bin folder, including the roslyn folder then published, and everything worked fine.
Remove old built data in temporary files, in the following path
C:\Users\[user]\AppData\Local\Temp\Temporary ASP.NET Files\vs
In my case, I was referencing one project in the other accidentally, which is why I was getting this error after removing the one accidentally added in the main project solved the problem.
I am replicating web application deployment and found several issues related to HTTP Error 500.19. My machine is running Windows 7 while the working development is using Windows 8. We're developing our Web Application using Visual Studio 2010.
First, I got error code 0x80070021, similar as posted here.
I update my web.config according to the accepted answer and then I got following error code (which is similar as posted here).
HTTP Error 500.19 - Internal Server Error
Error Code 0x8007000d
Config Source -1: 0:
I have read the symptoms definition in Microsoft support page and cause of the error is:
This problem occurs because the ApplicationHost.config file or the Web.config file contains a malformed XML element.
and the solution is
Delete the malformed XML element from the ApplicationHost.config file or from the Web.config file.
However, the web.config that I used is working perfectly in the original development environment.
Here is what I have checked and tried so far:
Install ASP.NET by calling aspnet_regiis -i
Set my application to use different application pool (ASP.NET v4.0, .NET v4, etc)
ApplicationHost.config file is still using default from Windows 7.
This is part of my Web.Config
<system.webServer>
<section name="handlers" overrideModeDefault="Allow" />
<section name="modules" allowDefinition="MachineToApplication" overrideModeDefault="Allow" />
<validation validateIntegratedModeConfiguration="false" />
<modules runAllManagedModulesForAllRequests="true">
</modules>
<handlers>
<remove name="UrlRoutingHandler" />
<add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*" path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, Microsoft.ReportViewer.WebForms, Version=10.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" />
</handlers>
<urlCompression doStaticCompression="true" doDynamicCompression="false"></urlCompression>
<directoryBrowse enabled="true" />
<defaultDocument>
<files>
<add value="Logon.aspx" />
</files>
</defaultDocument>
</system.webServer>
I have read similar/duplicates/closed posts (around 13) posts in stackoverflow, tried all except the answer related to Ajax (is it related) and still have no clue on what the error is.
Does anyone one how to fix this error? (And if possible, a comprehensive lists of things need to be checked so we can reduce similar posts like this.) I am ready to provide more details.
Error 0x8007000d means URL rewriting module (referenced in web.config) is missing or proper version is not installed.
Just install URL rewriting module via web platform installer.
I recommend to check all dependencies from web.config and install them.
When trying to set up a .NET Core 1.0 website I got this error, and tried everything else I could find with no luck, including checking the web.config file, IIS_IUSRS permissions, IIS URL rewrite module, etc. In the end, I installed DotNetCore.1.0.0-WindowsHosting.exe from this page: https://www.microsoft.com/net/download and it started working right away.
Specific link to download: https://go.microsoft.com/fwlink/?LinkId=817246
Yes, for .net core apps, install dotnet hosting. This worked for me.
And here it is for .net6
And now if you need .net7
Install URL rewriting:
UPDATE - this is now available here (and works with IIS 7-10):
https://www.iis.net/downloads/microsoft/url-rewrite
Ensure you have the following set to 'Allowed' for your IIS server:
In my case, because I had reinstalled iis, I needed to register iis with dot net 4 using this command:
C:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_regiis.exe -i
In my case (.Net Core Web API) for this issue HTTP Error 500.19 – Internal Server Error 0x8007000d
First download dotnet-hosting-3.0.0-preview5-19227-01-win (.Net Core 3) or dotnetcore 2 hasting windows
https://download.visualstudio.microsoft.com/download/pr/5bed16f2-fd1a-4027-bee3-3d6a1b5844cc/dd22ca2820fadb57fd5378e1763d27cd/dotnet-hosting-3.1.4-win.exe
Any .net core 3.1 application either angular or mvc application would need this.
Second install it as Administrator
Open cmd as administrator, type iisreset, press enter
So refresh your localhost app
Best regard
M.M.Tofighi from Iran
A repair of the DotNetCore hosting bundle did the trick for me. :/
Installing ASP.NET Core Runtime Hosting Bundle solved the issue for me. Source: 500.19 Internal Server Error (0x8007000d)
Kind of late to the party here, but I have just been struggling with the exact same issue (symptoms) and cursing the lack of error detail reporting.
It worked fine on IIS 8+ machines but Win 7 got these INSTANT HTTP 500.19 errors.
For me it was as silly as having an unsupported configuration element in the config file:
<applicationInitialization doAppInitAfterRestart="true">
<add initializationPage="/" />
</applicationInitialization>
So while running old web.config files worked fine, I just diffed them and started chopping away at new blocks until I got the page to start loading. Had I seen this as an answer I would have gone this route immediately as I knew none of the popular solutions were relevant. So there you go :)
I turn on .Net Framework 3.5 and 4.5 Advance Service in Control Panel->Programs and Features->Turn Windows features on or off.it work for me.
Problem solved. Here are the steps that I tried:
Enable the 32-bit application in IIS -> Application pool -> Advanced settings
Copy System.EnterpriseServices.dll and System.EnterpriseServices.Wrapper.dll from C:\Windows\Microsoft.NET\Framework\v2.0.50727 to the application bin folder
Do comments/uncomments to sections on the web.config and found that problem related to the referenced DLL.
The config that I commented the previous one that I added:
<section name="handlers" overrideModeDefault="Allow" />
<section name="modules" allowDefinition="MachineToApplication" overrideModeDefault="Allow"/>
Add the required FasterFlect.DLL used by Combres.DLL v2.1.0.0 to the application bin folder (shall download the full zip from Combres codeplex, because the required fasterflect DLL V2.0.3732.24338 cannot be found in fasterflect codeplex) and other DLLs. For convinience, use the full Combres.DLL (1,3MB)
Check that the DLL versions and public key tokens are configured correctly in web.config using tool, e.g. .NET Reflector
I understand that this error can occur because of many different reasons. In my case it was because I uninstalled WSUS service from Server Roles and the whole IIS went down. After doing a bit of research I found that uninstalling WSUS removes a few dlls which are used to do http compression. Since those dlls were missing and the IIS was still looking for them I did a reset using the following command in CMD:
appcmd set config -section:system.webServer/httpCompression /-[name='xpress']
Bingo! The problem is sorted now. Dont forget to run it as an administrator. You might also need to do "iisreset" as well. Just in case.
Hope it helps others.
Cheers
I had this problem with a brand new web service. Solved it by adding read-only access for Everyone on Properties->Security for the folder that the service was in.
I had the exact same error. It turned out that it was something was caused by something completely, though. It was missing write permissions in a cache folder. But IIS reported error 0x8007000d which is wildly confusing.
I have the same problem when I was trying to publish asp.net core 5.0 web app on my local IIS and the solution was to add the following inside System.webserver tag in my web.config file
<applicationInitialization doAppInitAfterRestart="true">
<add initializationPage="/" />
</applicationInitialization>
Reinstalling ASP.NET Core Runtime - Windows Hosting Bundle Installer made the trick for me... I belive the "ASP.NET Core Module" was missing.
For me I had a web.config file in one my root folders, this config file was for the live server so removing it allowed the site to run on the dev server.
So check for any web.config files in folders too.
In my case, i have installed dotnet hosting but error change to HTTP Error 503. The service is unavailable, but after install windows update KB2999226 and dotnet sdk, its work!
follow the procedure chronologically or it might fail due to missing or errors in redirecting.
install Runtime bundle e.g.. dotnet-sdk-7.0....
2.turn asp services on and internet services"Turn Windows features on or off" to enable IIS
3.install web hosting bundle iis 7.0 e.g dotnet-hosting-7.0.2...
this worked for me
For me, it was all about setting up my web server to use the latest-and-greatest tech to support my ASP.NET 5 application!
The following URL gave me all the tips I needed:
https://docs.asp.net/en/1.0.0-rc1/publishing/iis-with-msdeploy.html
Hope this helps :)
I'm in the process of converting an existing ASP website into PHP while retaining the ASP website as an older version. Since I'm not an ASP developer, I thought it would be simple as moving the contents of the root directory into its own directory that I've labeled as v1.0 so that the ASP version can be viewed by going to www.mysite.com/v1.0 while the new PHP version (v2.0) can be viewed by going to www.mysite.com
Herein lies the problem. Doing this causes flags all kinds of errors (all related to "Server Error in '/' Application. Runtime errors"). The best I can figure out is that the web.config file needs to be tweaked in the v2.0 directory. Can any of you ASP experts recommend a simple solution to make this happen? I would like to have an empty root directory if possible since the new v2.0 version will be in all PHP and want to "self contain" the ASP version within the v1.0 directory as much as possible.
Thanks!
After a bit of wrangling, finally figured out that I needed to set up v1.0 as its own application under the IIS control panel. Once that was done, then all the contents of the root directory could be moved over to the v1.0 sub-directory and viewed via www.mysite.com/v1.0 -- thanks to Sean! for his help!
Most Classic ASP pages use Server Side Includes, if the site is using a SSI such as:
<!-- #include virtual = "include-file.inc" -->
, then you will need to change all of these to be
<!-- #include virtual = "v1.0/include-file.inc" -->.
I assume that you are using IIS 7 or IIS 7.5, since you are not seeing the actual error, you will need to modify your web.config file.
<configuration>
<system.webServer>
<asp scriptErrorSentToBrowser="true" />
<httpErrors errorMode="Detailed">
</system.webServer>
</configuration>
Reference:
http://learn.iis.net/page.aspx/564/classic-asp-script-error-messages-no-longer-shown-in-web-browser-by-default/
Update
Since it now sounds like you are using ASP.NET, you would need to change your web.config as below to see the full error:
<configuration>
<system.web>
<customErrors mode="Off" />
</system.web>
</configuration>
hey guys,
i have downloaded mondor's captcha control, and implemented on localhost, thats working fine, but when i did the same steps and uploaded to the hosting server, i am unabel to get captcha image,i want to know whats the difference between placing dll's in bin folder and adding it as a reference because anyway it will go in bin folder. on localhost i added a reference to that dll and on hosting server i just added the dll in the bin folder, is that the problem, if yes than what could be the solution for this issue...
If anyone knows about it, please suggest..
Please check IIS version on server.
For IIS 7
change the following line in web.config file under <system.webServer> <handlers>:
<add name="MSCaptcha" path="CaptchaImage.axd" verb="GET" type="MSCaptcha.CaptchaImageHandler, MSCaptcha" preCondition="integratedMode,runtimeVersionv2.0"/>
Check all folders and files had been uploaded related to captcha control
I am trying to implement the TinyMCE Spellcheck plugin that uses GoogleSpell. The thing is I am trying to install it in an MVC environment.
I started by referencing the .NET class Library DLL (MoxieCode.TinyMCE) in my project.
Then, I added this code to my web.config:
<system.webServer>
<handlers>
<add name="TinyMCE" verb="GET,HEAD,POST" path="TinyMCE.ashx" type="Moxiecode.TinyMCE.Web.HttpHandler,Moxiecode.TinyMCE" />
</handlers>
<!--previously existing rules-->
<validation validateIntegratedModeConfiguration="false"/>
<modules runAllManagedModulesForAllRequests="true"/>
</system.webServer>
I then added these lines to my tinyMCE.init({}); call:
plugins: "spellchecker",
theme_advanced_buttons3: "spellchecker",
spellchecker_languages : "English=en",
spellchecker_rpc_url : "TinyMCE.ashx?module=SpellChecker",
These steps are outlined in the tutorial here. I then followed instructions from this stack overflow post which recommended the following modification to global.asax to make it mvc friendly:
routes.IgnoreRoute("TinyMCE.ashx");
routes.IgnoreRoute("{resource}.axd/{*pathInfo}");
Everything seems fine accept that when I browse to /TinyMCE.ashx i get this error:
Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly.
Requested URL: /TinyMCE.ashx
Why can't asp.net mvc process that url?
Make sure the handler is being applied at the correct element in the web.config.
IIS supports 2 types of modes, an integrated mode and a classic mode.
The classic mode is the how versions previous to IIS 7 worked. Depending on that, you put the handlers in the web.config section that applies to asp.net, or in the section that is picked by IIS directly.
After a fair bit of frustration I stopped messing with it on localhost in VS 2010. I suspected that it was a problem relating to IIS configuration, so I uploaded the site to a sub-domain of the live server. It worked without any problem.
I'm not sure why the code didn't work on localhost but evidently, the steps I followed to execute TinyMCE .NET and GoogleSpell were correct because they work on the live server.