I am trying to customize the Lightbox/zoom feature in Cargo Collective, believe it uses Photoswiper.
As of now it fills the whole screen and would like to be able to control the size so it does not cover the top and bottom nav bars. Can I add some padding or block to the PSWP? The PSWP is not showing up in the general CSS editor. SO it seems as though I would need to add some of my own code.
The goal is trim off the top and bottom and also control the size of image when zoomed.
Thank you in advance.
I came across the same problem trying to resize the PhotoSwipe image within my Cargo Collective site. I added the following to the custom CSS and it worked perfectly:
.pswp img {
object-fit: contain !important;
max-height: 400px !important;
max-width: auto !important;
margin-top: 100px;
margin-bottom: 100px;
}
I also styled the background with the following. You could also add margin top and bottom here if you want to add a gap in the PhotoSwipe background.
.pswp__bg {
background-color: #fff !important;
}
.Pswp_bg image-zoom-background {
background-color: #fff !important;
}
Cheers!
An update - this solution looked great on my screen but too small on a big screen. Styling with percentages rather than a single px size is a better solution here. Hence:
.pswp img {
object-fit: contain !important;
max-height: 70% !important;
max-width: auto !important;
margin-top: 5%;
margin-bottom: auto;
}
Related
I'm currently learning web design and I was solving some sample problems online, there was one specific case when I was asked to:
Write a CSS rule that limits the width of the webpage to only half the size of the browser and centers it in the browser window.
Add a CSS rule, to the rule above , to display a green background color that fills all the browser window including the empty left and right sides.
For 2, I could use this:
body {
background-color: green;
}
But for 1, I couldn't do it. How do I get the size of the browser? It sounds confusing.
Set this CSS to your body-
body{
width:50%;
margin: 0 auto;
background-color: green;
overflow: hidden; //just in case if you don't want your any fixed width element crosses the body width.
}
All you have to do is set width: 50%;
Or if you want to set to maximum of 50%, use max-width: 50%;
To center, set margin-left: auto; and margin-right: auto;
this is very easy just one step you have to take try this
body {
width: 50%;
margin: 0 auto; //optional if you want your page in center
}
I have a background image of a paper airplane on the body tag of this page: http://cogo.goodfolk.co.nz. The very tip of it is being cut off - if you resize the browser window the full image pops back in.
It's only happening in Chrome, and isn't consistent, if you refresh sometimes, or even hover over sometimes it's fine. If I remove all the background styles (background position and no-repeat) then the whole image is there - but of course isn't positioned correctly. It's also happening on other pages of my website (eg http://cogo.goodfolk.co.nz/online-surveying).
After days of debugging/searching I can't find anything that refers to this issue and/or fixes it - is it possibly a Chrome bug with background-position?
Any ideas or workarounds? Thank you!
//EDITED//
The relevant code is pasted below, although obviously this is pretty standard so it must be something else in the site that's causing the problem:
.home {
background: url("../img/airplane.jpg") no-repeat center;
background-size: 70%;
background-position: 10% 98%;
}
The background image is set to center, so this is expected behaviour, depending on window size. You could change this CSS declaration from:
.home {
background: url("../img/airplane.jpg") no-repeat center;
background-size: 70%;
}
To:
.home {
background: url("../img/airplane.jpg") no-repeat center top;
background-size: 70%;
}
This would anchor the image to the top of the screen, meaning it would not clip, but this may not be the behaviour you are looking for.
To complicate matters, you also have this, which is probably contributing to the problem. I would suggest removing it entirely:
#media (min-width: 1200px)
.home {
background-position: 20% -10%;
}
Yay thanks to everyone who left suggestions, fortunately I've figured out a workaround! I managed to pretty much keep the background styles the same, and just placed everything in a :before pseudo element on the body tag. You can check out the updated code at cogo.goodfolk.co.nz if you're interested, or it's pasted here:
.home {
position: relative;
min-height: 860px;
}
.home:before {
content: "";
position: absolute;
width: 100%;
height: 100%;
background: url("../img/airplane.jpg") no-repeat center;
background-size: 70%;
background-position: 50% 15%;
}
Set the display to "inline-table".
I recently got a Ning account. I want to customize the site a bit more using their "Add Custom CSS" option I would like the ning site to look as close to this site as possible. More specifically the green horizontal bar across the top of the page, and the location and spacing of the header group. I'm currently using the following CSS on the ning site but can't figure out how to make the green horizontal bar span the entire width of the page. Any help, advise or direction would be greatly appreciated.
.mainTab-item.active, .mainTab-item.active > a {
color: #00a6ed;
}
.site-header {
height: 0px;
}
.header-container {
margin-bottom: 15%;
}
h2.module-name {
background-color: #88C540;
color: #FFFFFF;
font-size: 16px;
margin-top: -15%;
max-width: 100%;
padding: 30px;
text-align: center;
text-shadow: 2px 2px 0px #609F16;
}
Here is the Commonly used CSS classes and HTML (ning.com/ning3help/commonly-used-css-classes-and-html)
The problem here is that your container has a width of 960px which the green bar is included inside. Therefore when you set max-width or width of 100% it is relative to the container. E.g. 100% of 960px is 960px.
The only way around this would be to change the mark-up and take it out of .container in order for the percentage to be relative to the document.
Or another option is to absolutely position the div to take it out of the document flow. But I strongly do not advise that.
Working with a Wordpress theme, and needed to have the blue blur background stay with the slider when the browser window is re-sized. I have achieved that goal, but I have noticed that when you narrow the browser, everything does not stay centered there is a large space on the left. What would be the best way to remedy this?
http://www.stringcreative.ca/wp/
The sites a bit of a mess, you need to have the wrappers with the image, then the containers the same size centered
#wrapper {
background: #000b1a url("http://www.stringcreative.ca/wp/wp-content/themes/Rbox2Pro/images/masthead.jpg") no-repeat fixed top center;
}
#header_container {
margin: 0 auto;
height: 117px;
width: 960px;
position: relative;
}
dont need a lot of the position's set to absolute, and margins at - to get it to fit.
also look into the 960 Grid System. i use it all the time, and saves me loads of time getting the site to fit. hope this helps
It's because your solution for centered the slider is inelegant, and relies on fixed widths and absolute positioning to make it look right.
To fix it, you need to change a few things.
Change #homebgw to:
#homebgw {
background: url("http://www.stringcreative.ca/wp/wp-content/themes/Rbox2Pro/images/masthead.jpg") no-repeat scroll 50% -117px transparent;
height: 411px;
width: 100%;
}
Change #header to:
#header {
background: url("http://www.stringcreative.ca/wp/wp-content/themes/Rbox2Pro/images/masthead.jpg") no-repeat scroll 50% 0;
height: 100px;
margin: 0 auto;
padding-bottom: 35px;
width: 1400px;
}
Quite simply, you don't need absolute positioning to solve the issues you posted above. If you're using absolute positioning and negative margins to correct center alignment issues, you're probably doing something wrong. Keep it simple, and Google how to achieve the results you desire. The net is full of helpful documentation to achieve these basic results without hacking up your code with fixes ;)
I have a portfolio page with a image display with zoom.
I have this code: http://codepen.io/Mpleandro/pen/LvrqJ
The div that shows the image has a class of .display, on line 13 of the HTML and the css formating for this div isline 90.
The image width will be flexible, so I what I want is to make the containing div inherit the width of image.
I tried the css property auto, inherit and min-with, but nothing works!
Could someone help me?
P.S.: I need a responsive solution.
Thanks
since 1 year has passed you may not be interested in the solution, but hope that helps someone else.
I also had a situation like that where I needed a div to be of the same width as the image and this had to be responsive.
In my case, I set a fixed width for the div
.some-div{
width: 250px;
}
I also had responsive image:
img{
display: block;
max-width: 100%;
height; auto;
}
and then I added a media query with threshold when the fixed width of the div started to affect the responsive nature and simply addedd this:
#media screen and (max-width: 917px){
.some-div{
width: 100%;
}
}
For my project the threshold was 917px when the fixed width started to affect.
I guess it is a solution that will fit everyone since width: 100% after the certain threshold will always be the width of the image if the image is responsive.
I don't know how to give you a perfect answer, but I can hopefully send you in the right direction. First, you can forget about inherit or min-width because they are not what you want.
auto is the default value, and I think that the default behaviour is very close to what you want: the width of the div adapt to its content. If this is not the current behaviour, this is because of many other reasons including the positioning of that div. The thing is, you won't have a proper centering and sizing of the <div class="display"> with only CSS, because it would need a specific explicit width declaration.
Since you already use Javascript to display/hide the good images, you could use Javascript to set the width everytime you change the image that is in the box.
My best advice would be to use existing solutions which are tested, approved and look really good. A 2 seconds Google search pointed me to Fesco which you could try.
I'm not sure if this is what you mean, but if it is, I hope it will help!
If you want your image to fill the div, but to scale with the browser, try setting the width of your div. Next, apply max-width="100%"; height: auto; to your image.
The simplest solution would be to just set .display to display: inline-block;, which would adjust its size to the contained image. If you want to be responsive as well, you need to define an upper limit via max-height: 80%, for example.
Put together, it would look like this: http://codepen.io/anon/pen/IluBt
JS line 17:
$(".display").css("display","inline-block");
CSS for .display
.display {
position: relative;;
background: rgba(255,255,255,0.5);
border-radius: 10px;
-moz-border-radius: 10px;
-webkit-border-radius: 10px;
max-height:80%; /* <-- limit the height */
top:10%;
left:0;
margin:auto;
}
And to align everything nicely:
.loader {
color: red;
position: fixed;
width: 100%; height: 100%;
background: rgba(0,0,0, 1) url(../http://www.mpleandro.com.br/images/new/loader.gif) no-repeat center center;
text-align: center;
}