I've been trying to build a CordApp and I downloaded the template from GitHub. The code that I've written is available on the following link:
https://github.com/shanmukhipriya99/taskcordapp
When I'm trying to run gradlew.bat deployNodes in the cmd terminal, this is what I got:
[gradlew.bat deployNodes]
Then when I run build\nodes\runnodes in the cmd terminal, this is what I got:
[build\nodes\runnodes]
Then I have three other terminal windows opening-up, they load the Corda part, show some red text that says something about the developer mode and all the node terminals get closed automatically before I'm able to read the entire text.
Can someone please help me in figuring out where I'm wrong!?
Thanks in advance!
It looks like you have had successfully started the nodes all in one terminal. I am not entirely sure, if this is the only issue, but I have seen this issue before. This is caused by lack of permission of the Terminal.
I have seen it happened for both Windows and Unix/Macos users. To resolve it you might need to grant the permission to Terminal manually.
If it still does not work out, I would actually suggest the alternative quick fix that Ashutosh mentioned in comment. Open a new tab and go to the root folder of each nodecd /build/nodes/XXX, and start the node manually via java -jar corda.jar
Related
I have a new archlinux installation and got rstudio-desktop-bin from AUR, as the project site says to. However, I get a blank screen (as below) when trying to open it. When using
sudo /usr/bin/rstudio-bin
It opens normally. I tried to reset rstudio from this tutorial
https://support.rstudio.com/hc/en-us/articles/200534577-Resetting-RStudio-Desktop-s-State
and in this question, the problem was solved changing file permission. Both did not work for me.
What could I do?
Rstudio when opening normally:
I found a suggestion that an update to electron may have caused an issue in the RStudio community forums. By disabling sandboxing, they were able to start RStudio as a user and it worked for me:
/usr/bin/rstudio-bin --no-sandbox
To make more permanent until the problem is resolved you can add a line to your .bashrc (or equivalent in another shell):
export RSTUDIO_CHROMIUM_ARGUMENTS="--no-sandbox"
There is also a suggestion in there about building from a weekly source instead. But this was easier for me so I can't vouch for it.
I've been successfully using iExpress for years. Now, when generating the same .exe files that I always generate, iExpress is now giving me the error: Unable to end update of resources.
This error comes at the very end of the process. I see the Create Package screen and the text "Creating the package..." Then the error occurs. In the file folder, I'll see a file like: ~MyFileName.CAB which would normally be deleted at the end of running iExpress.
I've tried deleting the .CAB file and rerunning iExpress again (many times). I tried rebooting. I tried running iExpress with different applications. I tried searching the web and Stack Overflow. I'm using the same Windows user account I normally use. Desperate for help as I'm unable to release my applications. Thank you!!!
The problem is resolved, though not exactly sure how. I did have another user run iExpress on my machine as that other user. (Ie, right-click on the iExpress executable and run as the other user.) That user was able to run iExpress without the error I reported above. And after that, iExpress started magically working for me too.
Could running as the other user have caused Windows to clear out some file that had been corrupted? Something else? I don't know. I just thought I would write what happened in case this can help someone else in the future.
FURTHER UPDATE
The problem popped up again. I finally figured out that if I closed File Explorer before running iExpress, the error never happens. There's some bug with Windows 10 and/or iExpress where having the folder open can interfere with the final step that iExpress does.
Of interest: It's not a consistent bug. Sometimes iExpress finished and sometimes I got the above error when File Explorer and the folder in question was open.
I've been trying to install Meteorjs on windows but error occurs. I already tried downloading another installer and restarting my computer but it doesn't work. It always pops 'failed to contact install server. Please try again' then displays the message 'One or more issues caused the setup to fail. Please fix the issues and then retry setup. For more information see the log file.'
Under that it displays '0x80070643. Fatal Error during installation.'
what to do with this?
One option is to run meteor preview for windows. Believe it is a standalone copy of meteor 1.1
https://github.com/meteor/meteor/wiki/Preview-of-Meteor-on-Windows
(this doesn't address the issue of connecting to server though because when you try to create a meteor account you get a similar error).
there definitely is a way to install through command line on windows (which annoyingly I can't remember from my other machine). Perhaps through npm...
Try to run the package as administrator.It works!
Try this guide.
Download .zip, then unzip and set path environment variable.
I have properly set up JAVA_HOME, MAVEN_HOME to point to jdk home and maven installation homedirectory, and have also added JAVA_HOME/bin and MAVEN_HOME/bin in the PATH. But still when I execute karaf.bat I don't see any output as mentioned in the quick start guide here. Instead I see blank screen infinitely running. Please help me.
I am on Windows 7 64 bit.
After doing some google search, found this mail archive, which says the downloaded karaf could be corrupt.
As guided I downloaded the fresh karaf zip from another mirror (other than previously downloaded mirror) and now after installation, I am able to successfully run karaf.bat
I encounted the same problem. Apparently Karaf didn't start as it was described in the tutorial. Even more confusing was the fact that the log showed normal. Java process was created, the log said nothing wrong but Karaf console was silent.
After I tried to debug the problem for a while, I've discovered that downloading the zip from a different mirror solved the problem.
First off, I will acknowledge that I am aware of another similar thread on the topic of wkhtmltopdf, but it was not similar enough to resolve my issue. Here's the other thread: wkhtmltopdf
Second, I will say that I have successfully used wkhtmltopdf with a Drupal site on a dedicated server that I run, where I installed the libX11 and used the most recent static version of wkhtmltopdf. That's on a CentOS 5 system and it runs nicely.
So, I have another hosting arrangement and I need to get the wkhtmltopdf to work, because it does the most amazing job producing bookmarked PDFs. The PDFs are beautiful.
The hosting is cPanel. I determined that it is on a server that has CentOS 5.5. It is not a problem to drop the static wkhtmltopdf in the print module's lib folder. However, I get the following message back in the Drupal admin status reports page (admin/reports/status).
It says,
"wkhtmltopdf library
The currently selected version of wkhtmltopdf () is not supported. Please update to a newer version."
I have obtained all of the needed .so files for CentOS 5, based on what jockie provided in his answer in the other StackOverflow thread.
Can someone knowledgeable confirm that his list was complete?
The idea of a shell script wrapper seems interesting and appears could be done for Drupal, if the naming of the shell script is called something like "wkhtmltopdf-wrapper.sh".
I have tried to use the shell script code that jockie provided, in a shell script. I did place all of the .so files in a sub-folder called "lib". I confess that I do not know what such things mean, in the script:
export HOME="$PWD"
Can someone interpret for me, what $PWD means?
export LD_LIBRARY_PATH="$PWD/lib/"
I understand that the script is going to get the .so files with that line, yes?
And can someone interpret the following line:
exec $# 2>/dev/null
What I am wondering is, where does the actual pdf get output? I did run the script. It did not throw any errors. However, I did not see a resulting PDF file.
Also, jockie's directions are not totally clear or defined enough. He says, "(some of them are symlinks)" under the list of .so files. Are such lines (in his list), the symlinks?:
lib/libX11.so.6 lib/libX11.so.6.2.0
Or am I mistaken? I was able to get all of them, so I don't know why they would be symlinks. The only thing is, that some of the versions are different. Do I need to delete the following files and make symlinks instead?:
lib/libX11.so.6
lib/libXau.so.6
lib/libxcb.so.1
lib/libXext.so.6
Should the shell script code be written differently, with Drupal in mind?
Thanks for reading and I hope someone can help!
...Finally, if anyone knows of a better solution, please share! Again, I appreciate the help!
...There does not seem to be a way, here on StackOverflow.com to notify jockie to check out this thread. I wish there was a way to write to them or notify them, so that they could clarify for them-self or contribute to this thread as well. If someone knows of a way, please let me know that too!