I have a SQLite table just like this:
the table name is 'surat'
But i want to make id_ayat to be split into different rows using SQLite query, and expected result just like this:
_id|id_surat|id_ayat
---+--------+-------
3 | 2 | 112
3 | 2 | 213
3 | 3 | 19
3 | 3 | 83
3 | 3 | 85
3 | 3 | 102
is that possible? what query that i can use in SQLite format?
With a recursive CTE:
with recursive cte as (
select _id, id_surat, id_ayat,
id_ayat + 0 col
from tablename
union all
select _id, id_surat, trim(substr(id_ayat, length(col) + 2)),
trim(substr(id_ayat, length(col) + 2)) + 0
from cte
where instr(id_ayat, ',')
)
select _id, id_surat, col id_ayat
from cte
order by _id, id_surat
See the demo.
Results:
| _id | id_surat | id_ayat |
| --- | -------- | ------- |
| 3 | 2 | 112 |
| 3 | 2 | 213 |
| 3 | 3 | 19 |
| 3 | 3 | 83 |
| 3 | 3 | 85 |
| 3 | 3 | 102 |
Related
I have a database that I don't control the source of directly and results in errant '0' entries which mess up generated graphs with these drops to zero. I am able to manipulate the data after the fact and update that database.
It is acceptable that the last known good value can be used instead and so I am trying to make a general query that will remove all the zeros and populate it with the last known value.
Luckily, every entry includes the ID of the last entry and so it is a matter of simply looking back and grabbing it.
I have got very close to a final answer, but instead of updating with the last good value, it just uses the first value over and over again.
dummy data
CREATE TABLE tbl(id INT,r INT,oid INT);
INSERT INTO tbl VALUES(1,10,0);
INSERT INTO tbl VALUES(2,20,1);
INSERT INTO tbl VALUES(3,0,2);
INSERT INTO tbl VALUES(4,40,3);
INSERT INTO tbl VALUES(5,50,4);
INSERT INTO tbl VALUES(6,0,5);
INSERT INTO tbl VALUES(7,70,6);
INSERT INTO tbl VALUES(8,80,7);
SELECT * FROM tbl;
OUTPUT:
| id| r |oid|
|---|----|---|
| 1 | 10 | 0 |
| 2 | 20 | 1 |
| 3 | 0 | 2 | ** NEEDS FIXING
| 4 | 40 | 3 |
| 5 | 50 | 4 |
| 6 | 0 | 5 | ** NEEDS UPDATE
| 7 | 70 | 6 |
| 8 | 80 | 7 |
I have worked several queries to get results around what I am after:
All zero entries:
SELECT * FROM tbl WHERE r = 0;
OUTPUT:
| id | r | oid |
|----|----|-----|
| 3 | 0 | 2 |
| 6 | 0 | 5 |
Output only the those rows with the preceding good row
SELECT * FROM tbl WHERE A in (
SELECT id FROM tbl WHERE r = 0
UNION
SELECT oid FROM tbl WHERE r = 0
)
OUTPUT:
| id| r |oid|
|---|----|---|
| 2 | 20 | 1 |
| 3 | 0 | 2 |
| 5 | 50 | 4 |
| 6 | 0 | 5 |
Almost works
This is as close as I have got, it does change all the zero's, but it changes them all to the value of the first lookup
UPDATE tbl
SET r = (SELECT r
FROM tbl
WHERE id in (SELECT oid
FROM tbl
WHERE r = 0)
) WHERE r = 0 ;
OUTPUT:
| id| r |oid|
|---|----|---|
| 1 | 10 | 0 |
| 2 | 20 | 1 |
| 3 | 20 | 2 | ** GOOD
| 4 | 40 | 3 |
| 5 | 50 | 4 |
| 6 | 20 | 5 | ** BAD, should be 50
| 7 | 70 | 6 |
| 8 | 80 | 7 |
If it helps, I created this fiddle here that I've been playing with:
http://sqlfiddle.com/#!5/8afff/1
For this sample data all you have to do is use the correct correlated subquery that returns the value of r from the row with id equal to the current oid in the WHERE clause:
UPDATE tbl AS t
SET r = (SELECT tt.r FROM tbl tt WHERE tt.id = t.oid)
WHERE t.r = 0;
See the demo.
I'm trying to compose an SQLite query and I've found a problem that's beyond my skillset. I'm trying to output columns that are based on the rows of another referenced table.
Food_List:
| food_id | name |
|---------|-----------|
| 1 | Apple |
| 2 | Orange |
| 3 | Pear |
Nutrient_Definition:
| nutrient_id | name |
|-------------|-----------|
| 21 | Carbs |
| 22 | Protein |
| 23 | Fat |
Nutrient_Data:
| food_id | nutrient_id | value |
|---------|-------------|-------|
| 1 | 21 | 50 |
| 1 | 22 | 24 |
| 1 | 23 | 63 |
| 2 | 22 | 12 |
| 2 | 23 | 95 |
| 3 | 21 | 66 |
| 3 | 22 | 87 |
| 3 | 23 | 38 |
Output:
| food_id | name | Carbs | Protein | Fat |
|---------|-----------|-------|---------|-----|
| 1 | Apple | 50 | 24 | 63 |
| 2 | Orange | | 12 | 95 |
| 3 | Pear | 66 | 87 | 38 |
(Note that Orange does not have a "Carbs" entry in the Nutrient_Data table)
I believe the following will do what you want :-
DROP TABLE IF EXISTS food_list;
CREATE TABLE IF NOT EXISTS food_list(food_id INTEGER PRIMARY KEY, name TEXT);
DROP TABLE IF EXISTS nutrient_definition;
CREATE TABLE IF NOT EXISTS nutrient_definition(nutrient_id INTEGER PRIMARY KEY, name TEXT);
DROP TABLE IF EXISTS nutrient_data;
CREATE TABLE IF NOT EXISTS nutrient_data(food_id INTEGER, nutrient_id INTEGER, value INTEGER);
INSERT INTO food_list (name) VALUES
('apple'),('orange'),('pear')
;
INSERT INTO nutrient_definition (name) VALUES
('carbs'),('protien'),('fat')
;
INSERT INTO nutrient_data VALUES
(1,1,50),(1,2,24),(1,3,63),
(2,2,12),(2,3,95),
(3,1,66),(3,2,87),(3,3,38)
;
SELECT food_list.food_id,food_list.name,
(
SELECT value
FROM nutrient_data
WHERE nutrient_data.food_id = food_list.food_id AND
nutrient_data.nutrient_id = (SELECT nutrient_definition.nutrient_id FROM nutrient_definition WHERE nutrient_definition.name = 'carbs')
),
(
SELECT value
FROM nutrient_data
WHERE nutrient_data.food_id = food_list.food_id AND
nutrient_data.nutrient_id = (SELECT nutrient_definition.nutrient_id FROM nutrient_definition WHERE nutrient_definition.name = 'protien')
),
(
SELECT value
FROM nutrient_data
WHERE nutrient_data.food_id = food_list.food_id AND
nutrient_data.nutrient_id = (SELECT nutrient_definition.nutrient_id FROM nutrient_definition WHERE nutrient_definition.name = 'fat')
)
FROM food_list
;
Results in :-
I have the following table in an sqlite database
+----+-------------+-------+
| ID | Week Number | Count |
+----+-------------+-------+
| 1 | 1 | 31 |
| 2 | 2 | 16 |
| 3 | 3 | 73 |
| 4 | 4 | 59 |
| 5 | 5 | 44 |
| 6 | 6 | 73 |
+----+-------------+-------+
I want to get the following table out. Where I get this weeks sales as one column and then the next column will be last weeks sales.
+-------------+-----------+-----------+
| Week Number | This_Week | Last_Week |
+-------------+-----------+-----------+
| 1 | 31 | null |
| 2 | 16 | 31 |
| 3 | 73 | 16 |
| 4 | 59 | 73 |
| 5 | 44 | 59 |
| 6 | 73 | 44 |
+-------------+-----------+-----------+
This is the select statement i was going to use:
select
id, week_number, count,
(select count from tempTable
where week_number = (week_number-1))
from
tempTable;
You are comparing values in two different rows. When you are just writing week_number, the database does not know which one you mean.
To refer to a column in a specific table, you have to prefix it with the table name: tempTable.week_number.
And if both tables have the same name, you have to rename at least one of them:
SELECT id,
week_number,
count AS This_Week,
(SELECT count
FROM tempTable AS T2
WHERE T2.week_number = tempTable.week_number - 1
) AS Last_Week
FROM tempTable;
In case of you want to take a query upon a same table twice, you have to put aliases on the original one and its replicated one to differentiate them
select a.week_number,a.count this_week,
(select b.count from tempTable b
where b.week_number=(a.week_number-1)) last_week
from tempTable a;
I have a table like this:
+----+----------+----------+----------+-----------+----------+----------+
| ID | AR_SCORE | ER_SCORE | FS_SCORE | CPF_SCORE | IF_SCORE | IS_SCORE |
+----+----------+----------+----------+-----------+----------+----------+
| 1 | 25 | 35 | 45 | 55 | 65 | 75 |
| 2 | 95 | 85 | 75 | 65 | 55 | 45 |
+----+----------+----------+----------+-----------+----------+----------+
And I need to extract this:
+----+----------+-------+
| ID | SCORE | VALUE |
+----+----------+-------+
| 1 | AR_SCORE | 25 |
| 1 | ER_SCORE | 35 |
| 2 | AR_SCORE | 95 |
+----+----------+-------+
I read many questions about how to use pivoting in oracle but I could not make it work.
The conversion from columns into rows is actually an UNPIVOT. Since you are using Oracle 11g there are a few ways that you can get the result.
The first way would be using a combination of SELECT yourcolumn FROM...UNION ALL:
select ID, 'AR_SCORE' as Score, AR_SCORE as value
from yourtable
union all
select ID, 'ER_SCORE' as Score, ER_SCORE as value
from yourtable
union all
select ID, 'FS_SCORE' as Score, FS_SCORE as value
from yourtable
union all
select ID, 'IF_SCORE' as Score, IF_SCORE as value
from yourtable
union all
select ID, 'IS_SCORE' as Score, IS_SCORE as value
from yourtable
order by id
See Demo. Using UNION ALL was how you needed to unpivot data prior to Oracle 11g, but starting in that version the UNPIVOT function was implemented. This will get you the same result with fewer lines of code:
select ID, Score, value
from yourtable
unpivot
(
value
for Score in (AR_SCORE, ER_SCORE, FS_SCORE, IF_SCORE, IS_SCORE)
) un
order by id
See Demo. Both will give a result:
| ID | SCORE | VALUE |
|----|----------|-------|
| 1 | AR_SCORE | 25 |
| 1 | FS_SCORE | 45 |
| 1 | IS_SCORE | 75 |
| 1 | IF_SCORE | 65 |
| 1 | ER_SCORE | 35 |
| 2 | FS_SCORE | 75 |
| 2 | IS_SCORE | 45 |
| 2 | ER_SCORE | 85 |
| 2 | IF_SCORE | 55 |
| 2 | AR_SCORE | 95 |
Consider the following sqlite3 table:
+------+------+
| col1 | col2 |
+------+------+
| 1 | 200 |
| 1 | 200 |
| 1 | 100 |
| 1 | 200 |
| 2 | 400 |
| 2 | 200 |
| 2 | 100 |
| 3 | 200 |
| 3 | 200 |
| 3 | 100 |
+------+------+
I'm trying to write a query that will select the entire table and return 1 if the value in col2 is 200, and 0 otherwise. For example:
+------+--------------------+
| col1 | SOMEFUNCTION(col2) |
+------+--------------------+
| 1 | 1 |
| 1 | 1 |
| 1 | 0 |
| 1 | 1 |
| 2 | 0 |
| 2 | 1 |
| 2 | 0 |
| 3 | 1 |
| 3 | 1 |
| 3 | 0 |
+------+--------------------+
What is SOMEFUNCTION()?
Thanks in advance...
In SQLite, boolean values are just integer values 0 and 1, so you can use the comparison directly:
SELECT col1, col2 = 200 AS SomeFunction FROM MyTable
Like described in Does sqlite support any kind of IF(condition) statement in a select you can use the case keyword.
SELECT col1,CASE WHEN col2=200 THEN 1 ELSE 0 END AS col2 FROM table1