After switch to release mode to build a small project I have, when I try run it from inside the qt-creator ide, all goes fine. But when I go to the folder build-<project_name>-Desktop_Qt_5_14_1_MinGW_64_bit- Release and try run the executable generated in this directory, I got this error:
Anyone knows what the problem here? If it was some missing dll, I supose it will specify what dll was missing, right? Or I am mistaken?
update
After run windeployqt, this command found dependencies for my application, create some folders, but now I am getting tis error when try to run it:
update 2
after run the utilitary dependency walker, i got this errors on it:
I am using this build kit to build the project in qt-creator:
Here is all I know about Qt deployment & issues on Windows.
Check whether Release configuration of your project doesn't contain links to any debug versions of libraries.
Build your app in Release mode. Use Rebuild, If in doubt. See compile output window in the IDE, what paths it actually uses.
Use windeployqt tool to automatically copy all the necessary Qt dlls to the executable's folder. Be sure you are using windeployqt.exe from the correct folder. For example, currently I have one version of Qt framework, but two versions of windeployqt: for x86 and x64 compilers. In the case you have more than one version of Qt installed, you may have several versions of the tool.
.
C:\Qt\Qt5.14.1\5.14.1\msvc2017\bin\windeployqt.exe
C:\Qt\Qt5.14.1\5.14.1\msvc2017_64\bin\windeployqt.exe
Copy compiler libraries to the release folder. Make sure that you're copying libraries from the exact compiler you used to build.
Copy all necessary additional 3-rd party dynamic libraries. Make sure it is not debug versions.
If the problem persists, press Ctrl+C when the error message is active. It will copy all the text from the message box. Paste main part of the message to Google.
If the problem persists, open your .exe file in some dll-dependency viewer. Here is how I can see this in Lister. Be note that such a tool will show you not only missing dlls, but also a full path for each dll that your executable actually use. More power tool is Dependency Walker.
Make sure your application doesn't try to write something to a system protected folder, such as c:\Program Files\, without corresponding privileges.
If the problem still persists, simplify your project as much as possible. Run Release for an empty project. Than add modules, functionality and libraries step-by-step.
If everything is okay, test the application on a completely clean virtual machine.
Edit. I google your error text and what I found:
https://stackoverflow.com/a/52127944/
The problem was that windeployqt was unable to locate gcc for some
reason. I added it to my path from cmd with SET
PATH=%PATH%;C:\Qt\Tools\mingw530_32\bin. After I ran windeployqt
again, I did not have to copy libgcc_s_dw2-1.dll and
libwinpthread-1.dll over manually and it used the correct Qt5Core.dll,
since the application is now working fine.
Related
So I have Visual Studio 2013 (community edition) with Qt addin installed, Qt5 libraries (32bit), and I'm trying to create an executable that is independent of all development configurations (it may use static or shared libs, I don't really care at this point).
OS: Windows 7, x64.
For doing this I changed the Solution Confguration visual studio option from Debug to Release, and add all the necessary libs in Configuration Properties -> Linker -> Input -> Additional Dependencies. The application now starts only if I run it from visual IDE, If I try to start it from the generated .exe I got The application was unable to start correctly (0xc000007b) error.
I have searched and found that this error code indicates one of the following problems:
32-bit app tries to load a 64-bit DLL (not my case I think, Qt DLLs are 32bit (I have installed using this .exe: qt-opensource-windows-x86-msvc2013-5.5.0.), and I use some other .DLLs which are also 32bit).
There are some missing DLLs. (I did copy all the necessary Qt DLLs in the same folder with the final executable).
For checking what dependencies my app requires, I opened the .exe file with Dependency Walker application, this is what it shows me:
in this list were also Qt5Multimedia.dll and Qt5SerialPort.dll, I get rid of the errors by copying the .DLLs in the same folder with the .exe.
Any ideas how to solve this?
You should never do that operation manually unless the standard procedure completely fails. There is already standard tool for Qt Windows deploymend windeployqt.
It takes care about Qt DLL dependencies, makes a copy of platforms\qwindows.dll and also it makes a copy of libraries that you cannot detect with the Dependency Walker, since image plugins and some other are loaded at runtime.
You do not even need to have your Qt bin folder in your environment PATH. The simplest deployment:
copy built exe binary to a new folder
open cmd console in that folder
call windeployqt using its full path (if it is not in the system PATH) and provide your executable, for example:
c:\Qt\Qt5.5.1-vs2013-x64\5.5\msvc2013_64\bin\windeployqt.exe application.exe
As a result you have in that folder all needed Qt DLLs. Of course you can have also issues with MSVC redistributables, but those should be deployed separately and installed once per system.
The tool windeployqt has various options. It can also take care about deployment of qml related files.
Only some 3rd party libraries should be copied manually if they are used, for example OpenSSL.
Solution:
As I got deeper, I have found this answer, after doing what that answer indicates (I actually copied all the .DLLs located in \Qt5.5.0\5.5\msvc2013\bin to the folder where my .exe is located), the error message changed from The application was unable to start correctly (0xc000007b) to Application failed to start because it could not find or load the QT platform plugin “windows”.
Searching on web for more about this error, I have found from this answer that you also need the platforms folder in the same location with the .exe (which was located in Qt5.5.0\5.5\msvc2013\plugins path). After copying that folder, the application started without any problems!!!
Now I just need to delete all unnecessary .DLLs from my application folder (Dependency Walker does not offer very useful information about this), and all the deployment is done.
I have solved the problem in the same time as describing it, so I guess I will just leave this here, may help others that have the same problem.
I've been googling for a solution to this issue and although I've found many people sharing my problem none of their solutions work for me.
I wrote a C++ application using Qt framework using Visual Studio 2010. I built and ran the application in "Release" mode from Visual Studio without issue, but when I copy that exe from the Release folder to a new destination (pretend its a new PC) it fails to run providing this error:
---------------------------
TestApplication
---------------------------
This application failed to start because it could not find or load the Qt platform plugin "windows".
Available platform plugins are: windows.
Reinstalling the application may fix this problem.
Within the executable directory I have the following file structure:
./TestApplication.exe
./libGLESv2.dll
./Qt5Core.dll
./Qt5Gui.dll
./QtWidgets.dll
./platforms/qwindows.dll
./qt.conf
All dll files were taken from the 5.0.0 build of Qt in the Qtbase folder where the libraries reside.
The qt.conf file is:
[Paths]
Plugins=.
Without it, the launch error is the same except it says "minimal" and "offscreen" are available platforms as well.
For all other people experiencing this error it seemed to be solved by creating the platforms folder and putting in the qwindows.dll. But doing that myself doesn't change any behavior.
Is there something I've done wrong? Perhaps my method of generating the .exe in the first place is wrong?
If you are using libGLESv2.dll, then you must include libEGL.dll, too.
You can't see that in depends.exe, don't know how the Qt developers managed to hide this.
If your Qt is out of the box, then both Dlls are necessary even if you are not using OpenGL.
Also, if your Qt is out of the box, you need to include also the three ic*.dll, which contain information for Unicode handling.
You can see which DLLs are needed by looking at which ones are invoked when running Debug (F5) in Qt Creator.
=Carl
The release is likely missing a library/plugin or the library is in the wrong directory and or from the wrong directory.
Qt intended answer: Use windeployqt.
Qt comes with platform console applications that will add all dependencies (including ones like qwindows.dll and libEGL.dll) into the folder of your deployed executable. This is the intended way to deploy your application, so you do not miss any libraries (which is the main issue with all of these answers). The application for windows is called windeployqt. There is likely a deployment console app for each OS.
I've attempted to follow the instructions on deploying Qt to Windows, but I am stuck on step number 1. In it, it tells you to:
cd C:\path\to\Qt
configure -static any other options you need
Unfortunately, I can't get the Qt DOS prompt to recognize the "configure" command despite attempting to use it in virtually every folder under my Qt installation. Does anyone know where this command is store? Everything else about my project is working great with Visual Studio, but I just can't seem to figure out the deployment.
I've Googled the crap out of this and tried both the Qt and the regular Windows command prompts. Any help would be greatly appreciated!
Thanks
EDIT: For clarity, I have tried dragging all of the .dlls needed to run my program (by running it and finding the ones I get errors on), but all that happens is I stop getting errors when trying to run my app. If I double click it with the .dlls in the same folder, nothing happens at all.
Are you sure you need the static Qt build? Note that you must static build the actual Qt framework for that, and only after that you can build your application.
If yes, make sure you have the Qt source code, because configure is part of the source code of Qt, it's a tool that configure the Qt build.
The step refers to path of Qt Source directory e.g. C:\QtSDK\QtSources\\
As you can see in qt5 source tree there is a file configure.bat
You need to run that with static option, so it will configure Qt for static linking.
Then you need to re-build Qt to make your new configuration to take effect.
My app launches from inside Qt Creator no problem, but when I go into the debug folder, I
find the .exe file and I try to launch it, it complains that there is a missing DLL called mingwm10.dll.
I don't know how to fix this problem I tried the release as my build target, same thing happened.
Unless you compiled Qt statically and link to it statically, you will need to copy the Qt DLLs with your app when you go to deploy it to another computer, just copy the mingwm10.dll with them (it's in at least two places in my Qt install: <install path>\Qt\2010.02.1\mingw\bin and <install path>\Qt\2010.02.1\qt\bin).
For just running on your own machine, I would suggest you add the <install path>\Qt\2010.02.1\qt\bin path to your "Path" environment variable. This should allow your apps to run properly outside the IDE without having to copy the dll around for every project until you go to deploy it elsewhere.
I think, there are two ways to fix this. You can copy the mingwm10.dll from the MinGW directory to the directory of your exe file or you can recompile Qt without the dependency to mingwm10.dll (which seems to be used for thread safe exception handling). I found some information about it here: http://lists.trolltech.com/qt-interest/2006-08/thread00942-0.html
I checked out a Qt project hosted on google code with SVN to a local folder. When I opened it on Qt Creator, it managed to compile the project, but when it tried to run the compiled program, an error message came up on the application output:
The process could not be started!
What is wrong?
I solved this problem by going to projects>run settings and manually specifying the executable. Found this solution by googling, don't know if it's the proper way to fix this.
I assume you tried to run it manually and not from the IDE by pressing Ctrl+R, and I assume that it works when you're running it from the IDE. If that's the case, the problem is that the compiled application requires the Qt libraries and the runtime loader can't find them. When deploying the app, you need to copy the Qt libraries it links against to the application folder (on Windows), or you need to copy them to the app directory and launch it via a wrapper script which adds that directory to LD_LIBRARY_PATH (on Linux.)