I want to measure the distance to the next intersection/traffic light based on a gps location(s).
I DON’T have a route (i.e. no destination point) but I can get gps locations every second (while on the move).
Is it possible to get the information using HERE APIs?
I understand that there is no direct way (specific api) to do it, but I would appreciate any idea that will fulfill my needs.
The general idea that I came up with was getting at least 2 gps points to understand the direction, then getting link_id for current location and try to get the next links in same direction/road and find if any of them are intersections...
I didn’t find a way to do it. Any ideas?
There is no direct API for this however there is an idea that you have to crawl along the link into the direction determined like you outlined (or better by sending the last few GPS points to our Route Matcher (aka RME)) until you reach an intersection.
And this can be achieved with a concept of "electronic horizon" in SDK. It takes your current road link and driving direction and then crawls forward over the upcoming links until an intersection comes (or even beyond taking the most probable choice). mobile SDK has this "electronic horizon" feature.
https://developer.here.com/documentation/android-premium/dev_guide/topics/electronic-horizon.html
Related
I know that there is a Google API that can provide directions and/or driving distance between 2 points.
Is there a way to get all of the zip codes that the route passes through, or within a specified distance from the route?
The application has to do with deliveries. E.G. a truck is making a delivery from point A to point B. I would like to get all of the zip codes along the route in order to determine which other deliveries can be done in the same trip.
I've only found one post for something similar, but it's old, the links aren't valid any more and I would think there is something else out there.
I'm trying to get speed limit from Here API maps but I can't find the way to do it. I tryed few example on web site but the only one that works is the one which require point of start and point of stop of the route.
I would like to get the speed limit given only one point ( or a box ). Which api do I have to use? Is there an example?
https://route.cit.api.here.com/routing/7.2/calculateroute.json?jsonAttributes=1&waypoint0=51.31854,9.51183&waypoint1=50.11208,8.68342&departure=2019-01-18T10:33:00&routeattributes=sh,lg&legattributes=li&linkattributes=nl,fc&mode=fastest;car;traffic:enabled&app_code=appcode&app_id=appid
This is the waypoint one but is not what I'm looking for, I would like to pass it only a Latitude / Longitude.
Thank you
You can achieve this by using PDE API(Platform Data Extension)
You have to first map your geocordinates(lat,long) to a navigable position(lat,long) for the given coord and the Functional Class(FC1-5) it is located in. This you can achieve by a simple geocoder request
You can calculate tilexy values based on the navigable lat,long and pass it to PDE API for querying speed limit layer on that particular FC class.
Look at https://tcs.ext.here.com/examples/v3/link_speed_locator example which covers this exact usecase.
Below is a sample geocoder request. Here prox parameter is your lat,long
https://reverse.geocoder.cit.api.here.com/6.2/reversegeocode.json?app_id=xxxx&app_code=yyyy&prox=50.133848, 8.715332,500&mode=retrieveAddresses&maxResults=1&additionaldata=SuppressStreetType,Unnamed&locationattributes=linkInfo
Below is a sample pde request
https://pde.cit.api.here.com/1/tiles.json?layers=SPEED_LIMITS_VAR_FC1,SPEED_LIMITS_VAR_FC2,SPEED_LIMITS_VAR_FC3,SPEED_LIMITS_VAR_FC4,SPEED_LIMITS_VAR_FC5,ROAD_GEOM_FC1,ROAD_GEOM_FC2,ROAD_GEOM_FC3,ROAD_GEOM_FC4,ROAD_GEOM_FC5&levels=9,10,11,12,13,9,10,11,12,13&tilexy=536,398,1073,797,2147,1594,4294,3188,8588,6377,536,398,1073,797,2147,1594,4294,3188,8588,6377&app_id=xxxx&app_code=yyyy
Read more about it in the developer site - https://developer.here.com/documentation/platform-data/topics/quick-start-view-map-data.html
Hope you find this useful!
The ReverseGeocoder has rarely used mode "trackPosition" (mode=trackPosition).
In combination with locationattributes=linkInfo you may retrieve the speed limit for that matching road.
i would like to know if it's possible to make a navigation function that, before creating the path, check through an array of "indesiderate" points and, if the best way touch one of these, try to find an alternative path.
for example, if i have a busy street (from my database, not using traffic service), i took an array of point along all the street (at any switch of course), and i want to avoid these points (=this street)
i made this sort of list of points, but i cannot find a way to find alternatives in path computing
i saw in the gmaps api documentation that the avoid command alredy exist, but can be used only to avoid tolls or highway, but i cannot find a cord-avoid command
thanks
Not available at present. Vote (star) the enhancement request:
https://code.google.com/p/gmaps-api-issues/issues/detail?id=214
I have a number of GPS co-ordinates that describe a route. My intention is to draw a polyline along the route, and then colour segments based on some data I have.
Problem is, the GPS coordinates can occur on the roadside either side of main roads. When using the obvious Directions service solution a lot of "back and forth" occurs as Google tries to get me either side of a split lane road
What I am aiming for is a direct route from A-H passing through every way point. I have considered reverse geocoding the coordinates to a street name and having the directions use the street as a way point, but that picks a specific point on the street that may not be related to the actual route. Single polylines are also not an option as some routes have turns in them.
Is there a way to 'fuzzy' my waypoints so that the directions are happy when passing within a certain radius of the points? If not, has anyone got any other solutions?
Thanks heaps.
Edit: It's also not an option to just not use the middle way points because sometimes the path is not optimal.
Also have tried my own fuzzy coords now, by +- some small value to each consecutive lat/lng pair. Unsurprisingly I ran into OVER_QUERY_LIMIT pretty soon.
I am trying to get the distance traveled on a transit route -- particularly San Francisco MUNI, but the standards NextBus, GTFS, and Google Maps API appear to be universal. I'm comfortable using any of these APIs, I'm just not sure how to go about this problem.
The easy way - ask Google Maps (this using webservices, but there is also the javascript API):
http://maps.googleapis.com/maps/api/directions/json?origin=37.7954199,-122.397&destination=37.7873299,-122.44691&sensor=false&mode=transit&departure_time=1348109609&alternatives=true
this JSON includes distance traveled, but there are two issues:
Google does not allow you to use this data unless you're displaying a map, which I don't want to do
I would need to ensure that the distance returned is for the correct route/line, since it can/will give multiple routing options. This is probably doable but would require more logic.
EDIT: using alternatives=true (or provideRouteAlternatives: true using the javascript API) only returns a maximum of 3 routes, which here in SF often doesn't include the route I'm looking for (other transit agencies, multiple lines on the same route, etc). So this isn't such a great option.
NextBus:
example route config:
http://webservices.nextbus.com/service/publicXMLFeed?command=routeConfig&a=sf-muni&r=1
The coordinates for each stop are given, but connecting the dots on those is not the same as the route taken -- it will cut corners, etc, and I need this to be accurate. The actual route taken is given under <path>/<point>, but I don't see any obvious correlation between stop and path coordinates. Plus, NextBus says in their documentation (p.10 near the bottom) that you should NOT connect points between <path> segments, they're only meant for drawing on a map and can overlap.
GTFS:
The GTFS data also separates stop and "shape" coordinates (like NextBus paths). Unfortunately, the coordinates are slightly different for the same stops between NextBus and GTFS (rounding), though the stop ID/tags are the same. Also, the data files are in the megabytes, and I need to use this for a mobile app. I suppose I could put all the data in a database and query that, but that still leaves figuring out how to correlate the stops with the shape. The "shapes_distance_traveled" column in the shapes.txt file is especially promising. MUNI chooses to leave the optional "shapes_distance_traveled" field out of stop_times.txt, though.
Any advice would be appreciated, I understand this seems like an epic task to get a simple value. Maybe I'll just throw a map in to legitimately use the distance :)
Instead of using Google Maps, I would look into the un-encumbered licensing of OpenStreetMap. There are multiple
routing engines that can use OSM data. Personally, I would use routing in PostGIS or SQLite, but depending on your skillset you might choose another.
You've clearly done your research, (+1), and as you said, the easy way is to ask Google. If it is worth for you then you might want to look into purchasing a business licence to use the Google Maps API, and negotiate with them about the requirement of displaying a map. That's the only legal way I can think of with the Google API. Alternatively, you can try building you own routing engine with data from the TIGER data set, which is freely available from the US Census Bureau, but again, as you said, it may seem like an epic task. :-)