When I create a pdf document that I'm writing in Lyx, there are spaces between letters in some words when I use code programs to insert some pieces of programming.
In the Lyx program listing configuration I added the option "showstringspaces = false" but I do not get anything.
Can you tell me how I can remove these annoying spaces so that all the letters of each word in the code lists appear together?
I get ---> fmt. P r i n t
I expect ---> fmt.Print
I answer to myself. Putting the option columns = fullflexible or columns = flexible in the configuration of the code lists is solved
Related
I am new to Julia so sorry if this question is obvious.
I am trying to use Julia to help me run a series of finite element models, which use a text input file to give instructions to the finite element solver. Basically, I would like to use Julia to read in the base input file, edit some parameters on some lines of the file and then write it as a new file. I am getting hung up on a couple things though.
Currently, I am reading in the file like this
mdl = "fullmodelSVTV"; #name of input file
A = readlines(mdl*".inp")
This read each line from the file in as a separate string in a vector which I like because it makes it easier to edit the sections I want but it also makes things more difficult when I try to write to a new file.
I am writing the file like this.
io = open("name.inp","w")
print(io,A)
close(io)
When I try to write to a new file the output ends up look like this
Output from code
which is ["string at index 1","string at index 2","string at index 3"...].
What I would like to do is output this the exact same way is it is read in with string at each index of the vector on its own line. I would also like to remove the brackets and quotation marks from the file, as they might interfere with the finite element solver.
I think I have found a way to concatenate all of the strings at each index and separated them with a new line like shown below.
for i in 1:length(A)
conc = conc*"\n"*lines[i]
end
The issue with this is that it takes a long time to do given the size of the input files I am working with and I feel like there has to achieve my goal.
I also cannot find a way to remove the brackets or quotation marks when writing the file.
So, I'm wondering if anyone has any advice for a better way to write these text files in terms of both concatenating all of the strings from the vector when outputting as well as outputting without the brackets and quotation marks.
Thanks, any advice is appreciated.
The issue with print(io,A) is that it is printing a representation of the vector, but in fact you want to print each element of the vector. To do so, you can simply print each line in a loop:
open("name.inp", "w") do io
for line in A
println(io, line)
end
end
This avoids the overhead of string concatenation.
I have a csv, and each line reads as follows:
"http://www.videourl.com/video,video title,video duration,thumbnail,<iframe src=""http://embed.videourl.com/video"" frameborder=0 width=510 height=400 scrolling=no> </iframe>,tag 1,tag 2",,,,,,,,,,,,,,,,,,,,,,,,,,
Is there a program I can use to clean this up? I'm trying to import it to wordpress and map it to current fields, but it isn't functioning properly. Any suggestions?
Just use search and replace in this case. remove the commas at the end and then replace the remaining commas with ",".
Should anyone else have the same issue. Know that this solution will only work with data much like the example giving. If data has a lot of text and there are commas within the text that need kept. Then search replacing comma will not work. Using regex would be the next option and that can be done in Notepad ++
However I think the regex pattern depends on the data so not much point creating an example.
PHP could be used to explode each line also. Remove values that match a regex out of many i.e. URL, money. Then what is left could be (depending on the data again) just a block of text. That approach may not work if there are two or more columns with a lot of text
Setting:
I have (simple) .csv and .dat files created from laboratory devices and other programs storing information on measurements or calculations. I have found this for other languages but nor for R
Problem:
Using R, I am trying to extract values to quickly display results w/o opening the created files. Hereby I have two typical settings:
a) I need to read a priori unknown values after known key words
b) I need to read lines after known key words or lines
I can't make functions such as scan() and grep() work.
c) Finally I would like to loop over dozens of files in a folder and give me a summary (to make the picture complete: I will manage this part)
I woul appreciate any form of help.
ok, it works for the key value (although perhaps not very nice)
variable<-scan("file.csv", what=character(),sep="")
returns a charactor vector of everything
variable[grep("keyword", ks)+2] # + 2 as the actual value is stored two places ahead
returns characters of seaked values.
as.numeric(lapply(variable, gsub, patt=",", replace="."))
for completion: data had to be altered to number and "," and "." problem needed to be solved.
in a line:
data=as.numeric(lapply(ks[grep("Ks_Boden", ks)+2], gsub, patt=",", replace="."))
Perseverence is not to bad of an asset ;-)
The rest isn't finished, yet, I will post once finished.
I have a file with 15 million lines (will not fit in memory). I also have a small vector of line numbers - the lines that I want to extract.
How can I read-out the lines in one pass?
I was hoping for a C function that does it on one pass.
The trick is to use connection AND open it before read.table:
con<-file('filename')
open(con)
read.table(con,skip=5,nrow=1) #6-th line
read.table(con,skip=20,nrow=1) #27-th line
...
close(con)
You may also try scan, it is faster and gives more control.
If it's a binary file
Some discussion is here:
Reading in only part of a Stata .DTA file in R
If it's a CSV or other text file
If they are contiguous and at the top of the file, just use the ,nrows argument to read.csv or any of the read.table family. If not, you can combine the ,nrows and the ,skip arguments to repeatedly call read.csv (reading in a new row or group of contiguous rows with each call) and then rbind the results together.
If your file has fixed line lengths then you can use 'seek' to jump to any character position. So just jump to N * line_length for each N you want, and read one line.
However, from the R docs:
Use of seek on Windows is discouraged. We have found so many
errors in the Windows implementation of file positioning that
users are advised to use it only at their own risk, and asked not
to waste the R developers' time with bug reports on Windows'
deficiencies.
You can also use 'seek' from the standard C library in C, but I don't know if the above warning also applies!
Before I was able to get an R solution/answer, I've done it in Ruby:
#!/usr/bin/env ruby
NUM_SEQS = 14024829
linenumbers = (1..10).collect{(rand * NUM_SEQS).to_i}
File.open("./data/uniprot_2011_02.tab") do |f|
while line = f.gets
print line if linenumbers.include? f.lineno
end
end
runs fast (as fast as my storage can read the file).
I compile a solution based on the discussions here.
scan(filename,what=list(NULL),sep='\n',blank.lines.skip = F)
This will only show you number of lines but will read in nothing. If you really want to skip the blank lines, you could just set the last argument to TRUE.
The text to be checked is in Greek, but I would like to know if it can be done for English words too. My initial idea is described here, and I have already found a way to do it using VBA. But I wonder if there's a way to do it using R. If there isn't a way in R, do you think of something better than Excel-vba?
Alternatively, OpenOffice ships with a dictionary that entries stored in a text file. You can read that and remove the word definitions to create your word list.
This was tested on v3.0; the file location may have shifted, and the filename will change depending on which dictionary you want.
library(stringr)
dict <- readLines("C:/Program Files/OpenOffice.org 3/share/uno_packages/cache/uno_packages/174.tmp_/dict-en.oxt/th_en_US_v2.dat")
is_word <- str_detect(dict, "^[^(]")
words <- str_split_fixed(dict[is_word], "\\|", 2)
words <- words[,1]
This list contains some multi-word phrases. You may prefer to split on the first space, and take unique values. You probably also want to write words to file, to save repeating yourself.
Once this is done, checking a word is as easy as
c("persnickety", "sqwrzib") %in% words # TRUE FALSE
There exists an open source GNU spell checker called Aspell with suppot for various languages. This is a command line program which I basically use for scanning bunches of text files at once (then the output is just given to the console).
But there also exists a C API and perhaps more interesting for you a Pipe mode which accepts streams of texts and outputs to the standard output.
Hope this helps.