I'm trying to get Postfix working on my Mojave system but it doesn't start.
I created a sasl_passwd file and edited the main.cf file.
By starting postfix in the terminal I get the message
postfix/postfix-script: fatal: mail system startup failed
I have no idea how to get it working.
Anybody idea's how to do?
Related
SFTP stopped working once I upgraded RSSH to rssh-2.3.4-16.el7
I did all necessary setup for sftp, and it was working fine with rssh-2.3.3-2.el7.
I have a perl script which get invoked once user try to connect sftp, The script changes user to valid sftp user using setuid and setguid, below is the part of that code:
POSIX::setgid($sftp_gid);
POSIX::setuid($sftp_uid);
Post that script executes rssh:
/usr/bin/rssh -c /usr/libexec/openssh/sftp-server
This was working before I upgrade rssh, and stopped working after upgrade, it started giving error:
Can't exec "/usr/bin/rssh": Permission denied
It might be due to security fix of CVE-2012-3478 but not sure.
It works if I remove setuid and setgid code.
Can anyone help into this?
I'm unable to login to my RStudio Server installed on a ubuntu container. I've created the accounts and changed the user ids.
Screenshot of error:
Looking at /var/log/syslog there are Operation not Permitted errors on temporary files under /tmp/rstudio-rsessions - I just had to change the ownership or delete the files user-d and user-d.pid.
make wthis this manual
http://wireless.kernel.org/en/users/Documentation/hostapd
with this config file
interface=wlan2
bridge=br0
driver=nl80211
ssid=SupaAP
country_code=RU
hw_mode=g
channel=5
preamble=1
macaddr_acl=0
auth_algs=1
logger_syslog=-1
logger_syslog_level=3
logger_stdout=-1
logger_stdout_level=2
ignore_broadcast_ssid=0
ieee80211n=1
ht_capab=[SHORT-GI-20][RX-STBC1]
wmm_enabled=1
and i have error
oot#Cubian:/home/cubie/wif/hostapd-2.1/hostapd# ./hostapd /etc/hostapd/hostapd.conf
Configuration file: /etc/hostapd/hostapd.conf
Line 16: unknown configuration item 'ieee80211n'
Line 17: unknown configuration item 'ht_capab'
2 errors found in configuration file '/etc/hostapd/hostapd.conf'
Failed to set up interface with /etc/hostapd/hostapd.conf
Failed to initialize interfac
in old version i dont have thsi error
It appears that the problem is that hostapd 2.1 is now treating an error it had differently.
This is reproducible on Ubuntu desktop versions, as the resource (WLAN) is busy.
If one turns off the programs that are accessing the resource, hostapd has a chance to grab it and work.
In Ubuntu desktop 14.04 beta, a solution is to turn off the programs that are using the wlan in question.
This worked for me:
sudo nmcli nm wifi off
sudo rfkill unblock wlan
then hostapd can start normally from command line. Of course, if you want hostapd to start on boot you must insure that the network manager is not grabbing the resource ahead of time.
SOLVED
in compile conf i uncomment string
CONFIG_IEEE80211N=y
I have found this link explaining the cause of the error and how to solve it.
https://bugs.archlinux.org/task/20269
Also I have found this other link http://blog.mirjamali.com/en/IT/Linux/hostapd which I followed and it is working with me check the configuration part.
My OS is ubuntu 12.4
start your hostapd with
hostapd -dd /etc/hostapd/hostapd.conf
you will get more information for diagnostics. In which old version you did not get the error? Did you update hostapd? Or changed your wifi adapter? which distri you are using?
http://hostap.epitest.fi/cgit/hostap/plain/hostapd/hostapd.conf
there is written how the ieee80211n settings are. for me i cant see an error.
if you remove the both lines, the ap is starting correctly?
Using the following for just connection pooling no master_slave or replication: rhel 6, postgresql 9.1.9, & pgpool-II 3.1.3 (also tried 3.2.5)
Followed solution suggested in http://www.pgpool.net/pipermail/pgpool-general/2013-May/001773.html
After following the instructions for MD5 I also tried setting both pg_hba.conf and pool_hba.conf to trust for local and subnet, but still get the following error when attempting to connect to the pool locally:
ERROR: "MD5" authentication with pgpool failed for user foo
Tried locally on Fedora 18 with pg9.2 and pgpool from Fedora repo and worked right out of the box.
At the end of all routes suggested everywhere I could find.
Help would be greatly appreciated.
After having hit the same problem the solution was to change ownership of the pool_passwd file to postgres.
Even though this file has a 644 permission, if owner isn't postgres you'll always get the aforementioned error. I guess this file's owner and the user running pgpool must match.
I'm running PosgreSQL 9.2 and pgpool-II 3.3.2, BTW.
I'm trying to create a database using DBCA on Oracle 11g installation on Ubuntu Linux 12.04 64 bit.
I followed the instructions here, but I get
ORA-12547: TNS Lost Contact when running DBCA.
Below are the details. Can someone assist with the solution?
Instead of using /opt/oracle as the "oracle" user home, I used /home/oracle
I did not install the libstdc++5 in 32 bit version
I did everything else the same as the posting
Installation resulted in "missing packages". I tried to do an apt-get install for these packages from ubuntu, but ubuntu says that they don't exist.
Then I saw in the instructions:
Once you will reach the "pre-reqs" screen, check "Ignore all" to continue the installation.
When running ./dbca from $ORACLE_HOME/bin, it fails with ORA-12547.
I checked $ORACLE_HOME/network/admin and listener.ora , sqlnet.ora , and tnsnames.ora all look OK.
However, I think that tnsnames.ora is not being read properly, because ./tnsping fails and the error message states that "EZ Connect" was used.
But in my sqlnet.ora , I have
names.directory_lookup = (TNSNAMES,EZCONNECT)
It should use EZ Connect only after tnsnames is tried.
Also, I sometimes get ORA-12541: No listener. I tried running ./netca. Everything is OK until I perform a test on the listener, and it fails.
I can't run ./lsnrctl. Absolutely nothing happens for this, as well as lsnrctl start, stop, status.
I can't go through sqlplus. If I run ./sqlplus , it asks me for username/password directly.
If I do ./sqlplus / as sysdba, then this results in "ORA-12547: TNS lost contact".
All environment variables are set correctly in .bashrc.
I tried re-running root.sh , but the problem is not fixed.
/etc/oratab is OK
/etc/hosts is OK, but I can't always ping the "localhost" or "127.0.0.1", or "ubuntu" or "127.0.1.1"
The same TNS or Listener errors display.
When I login in oracle (sqlplus system/pass as sysdba), I got this:
ERROR:
ORA-12547: TNS :lost contact when try to connect to Oracle.
First, I think the server is down, but I check it, it is OK. And so many body say 'chmod 6751 oracle', I did it, but I got another error:
ERROR:
ORA-01031: insufficient privileges
Enter user-name:
finally, I switch the system user from root to oracle. And I login success.
Ensure the DB is up and running and you can connect locally AS SYSDBA to the database
using Oracle binaries owner (usually oracle:oinstall Unix / Linux user). If it does not
work, probably you encounter a different problem.
1. Check privileges of an Oracle file on Unix / Linux host where database is running:
cd $ORACLE_HOME/bin
ls -ltr oracle
2. Change permissions as below:
chmod 6751 oracle
ls -ltr oracle
This code may help you lot.