After I changed my Qt Version from 5.5.1 to 5.12.0 I get following message while I try to build any project:
msvc-version.conf loaded but QMAKE_MSC_VER isn't set
I selected the Qt 5.12.0 MSVC2017 32bit Kit instead of the Qt 5.5.1 (msvc 2013) Kit.
Does anybody know the reason for this message and could explain me how I should fix it?
Try removing any .qmake.stash files in your projects. This fixed this same issue for me when building QT from source after previously building with a different target.
I ran into this error message after returning to a project I hadn't worked on in a year.
I solved it by deleting the project's .pro.user file. (It seems to have been looking for a build kit I had gotten rid of at some point in the year.)
Open msvc-version.conf (in my case in C:\Qt\Qt5.12.8\5.12.8\msvc2017_64\mkspecs\common)
add
QMAKE_MSC_VER = 1929
at the beginning (for VS2019).
In older Qt versions, like Qt 5.6, which is last version that allows v2.1 of LGPL license.
Such thing as QMAKE_MSC_VER does not exist.
Simply create it, like:
Open mkspecs/common/msvc-desktop.conf file (from to Qt-sources) in editor.
Find:
unset(MSC_VER)
Replace it with below and done:
QMAKE_MSC_VER = $$MSC_VER
unset(MSC_VER)
Related
So I thought upgrading Qt and Qt Creator was a good idea since I used an older version of both.
I re-installed everything as I should and realized that Qt 5 is only for VS2010 for Windows which I have never worked with since I have been sticking with minGW up to this point,
I then realized my problems that my project wouldn't compile and run so I tried to download the 4.8.4 version with minGW, but that complained that:
"The installer could not find a valid c:\MinGW32\include\w32api.h
(Only versions with W32API3.13 are supported)"
and further I did not get creator when I installed it either.
Any help that would either let me go back to 4.8.8 minGW or a simple straight forward way using Qt creator with VS2010 would be appreciated, thanks.
I think I solved parts of my own issue (at least enough to answer this problem).
1: Download and install latest minGW installer and add ';C:\MinGW\bin' to the system variable 'path'.
2: Download the Qt 4.8.4 and install it (Does not come with Qt Creator) and add'C:\Qt\4.8.4\bin' to the system variable 'path'.
3: Download the latest Qt Creator, launch it and go:
tools -> options -> build & run
From there choose the correct Qt version by pointing to the Qmake in the Bin folder (C:\Qt\4.8.4\bin in this case)
Also make sure it auto detects minGW compiler, if it does not show up I am not sure what to do.
4: If you are including a project from other Qt versions you might have to delete the users.pro file (not the .pro file) to get it to compile properly.
Last issue is that I do not have any debugger, but the program compiles in the /release folder (if you put CONFIG += release in the pro file) and I can run it by using the .exe.
Using MSVS 2010 as the compiler isn't too hard.
Download Visual Studio Express 2010.
Install it, and now you have MSVS 2010 compiler available.
The compiler should be located under C:\Program Files (x86)\Microsoft Visual Studio 10.0\VC\bin or somewhere similar at cl.exe.
Setting up the latest version of Qt built against MSVC 2010, with the latest Qt Creator isn't too bad, either. In Tools > Options > Build and Run > Kits, find your Qt qmake installation, and in Tools > Options > Build and Run > Compiler, find your compiler.
Now you can use the amazing Qt 5 instead of sticking in the past with 4.8 (even though Qt 4.8 is awesome and works really well, too).
Hope that helps.
I have some difficulties with QT, which I need for school for some GUI applications.
I have recently done these steps:
1) mingw-get-inst-20120426.exefrom SourceForge installed to C:\MinGW\ with default settings.
2) Qt libraries 4.8.4 for Windows (minGW 4.4, 317 MB) from QT Project installed to C:\Qt\ with default settings. Here an error occurs:
!!!There is a problem with your MinQW instalation
!!!g++ not found in c:\MinGW\bin\
!!!Do you still want to continue? Yes
I checked c:\MinGW\bin\ there is no such file
3) Qt Creator 2.6.0 for Windows (51 MB)also from QT installed to C:\Qt\gtcreator-2.6.0 with default settings
4) Run the QT IDE
5) Open project or create new project. Another error occurs here
!!!No valid kits fond.
Qt Creator uses the invalid kit Desktop to parse the project.
6) Open Options->Build & Run->Kits (But I don't know how should I set Kits and where to find them).
7) Can you also help me, how to set Qt version
(Options->Buid&Run->Qt Version)? Where do I find qmake.exe?
I also didn't find how to create GUI Application. There is no such option in New File or Project...
Thanks for help.
That is quite tricky ;)
Precompiled Qt (MinGW) is only win32 (not win64).
Precompiled Qt is compiled with MinGW-g++ 4.4 and won't work with other.
You have to download this one:
http://get.qt.nokia.com/misc/MinGW-gcc440_1.zip
//// Edit: With this version of MinGW, gdb won't work (it's not python-enabled). Although QtSDK is depracted (and you won't find it on qt-project.org), I highly recommend downloading this online installer and, during the selection of components mark only MinGW. It will come with folder named "pythongdb".
http://www.developer.nokia.com/info/sw.nokia.com/id/da8df288-e615-443d-be5c-00c8a72435f8/Qt_SDK.html
(You may need to register. It's free.)
////
Add "Compiler" by g++.exe
Add "Qt Version" by qmake.exe.
Add "Kit" with Compiler and Qt Version configured above. You can try to change debugger from CDB to GDB.
When you installed mingw, did you select the C++ compiler? It is not selected by default but you need it. Re-run the wizard and select that.
The kit is not valid because the C++ compiler cannot be found: try to install it first. If you still cannot setup this read the manual: http://doc-snapshot.qt-project.org/qtcreator-2.6/creator-targets.html. It is very complete.
qmake.exe is in *qt_directory*/bin/qmake.exe.
Try this out:
http://sourceforge.net/projects/mingw-w64/ (Since the mingw-w64 project on sourceforge.net is moving to mingw-w64.org i suggest to use mingw-w64.org)
It works for me.
I just updated my Qt to 4.8.3, because the program built from older version is not compatible to the new framework.
So I have to upgrade.
This process was frustrating and time consuming. So many problems came out.
I download Qt from this url:
http://qt-project.org/downloads
At beginning, I installed the MinGW one (I'm not a fan of MSVC).
I tried the newest ( I think it's 4.6) version of MinGW and order version (4.4).
However, after I installed MinGW and tried to install Qt 4.8.3, during the process, the following message shows up:
There is a problem with your MinGW installation:
The installer could not find a valid C:\MinGW\include\w32api.h (Only versions with W32API 3.13 are supported)
Do you still want to continue? (Your installation may not work)
The 4.6 version does have this w32api.h file, I don't know what's going on. And I have trouble finding MinGW 4.4 with this head file.
I decide to ignore this warning and continue to install Qt and Qt creator. After that,
I opened my current project, configure it (why the configuration become so complex...), I tried to build it.
Then the following message shows up because some external lib I used requires Exception Handling:
exception handling disabled, use -fexceptions to enable
And I don't know how to enable the it.
I tried to add -fexceptions flag in QMAKE_CXXFLAGS but it doesn't work.
By the way, I tried the VC version of Qt too, but I used the MinGW before and the VC compiler is quite different, if I use VC version, it will take a lot of time to make it compilable by VC compiler.
Does anyone know how to install Qt 4.8.3 on Windows? my project works fine before, now I just want to compile it successfully.......
These are not the only problem.
I updated the Qt on Mac machine too, it is easier to have the compiler work since it's unix base.
However, I used QtWebkit lib in my project and obviously, they changed this lib and it's not compatible to order version.
I can compile my project on Mac, however, every time I run it, following massage shows up and the program stopped.
dyld: Symbol not found: _OBJC_CLASS_$_CALayerHost Referenced from:
/Library/Frameworks/QtWebKit.framework/Versions/4/QtWebKit Expected
in:
/System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
The program has unexpectedly finished.
Does any one know how to solve this QtWebKit problem? I'll really appreciate.
I remembered that when Qt is under nokia, it's so easy to install and use, the Qt SDK is perfect.
I really hate the change made after it was bought by digia.........
I found solutions of my first two problems:
for the first problem, as I described, download the MinGW provided by Nokia Qt
ftp.qt.nokia.com/misc/MinGW-gcc440_1.zip [ftp.qt.nokia.com]
Tried several versions of MinGW 4.4, I think this is the only one works.
About the second problem, add following configure in the project file:
CONFIG += exceptions
Now the QWebKit problem is only one unsolved.
Is it all relevant that your include directory for MinGW has two "i's" in it or was that a typographic error when posted on SO? See:
The installer could not find a valid C:\MinGW\iinclude\w32api.h
I am facing a problem configuring Qt Creator, unable to add Qt Version.
Error is shown below :
I had installed Cascades native NDK and the BB simulator.
Help me out of this problem....
I think you're using Windows. So all next is context depended on Windows.
You need to add special environment variables like these:
QNX_TARGET=C:/Development/bb-ndk-3.0/target_10_0_9_386/qnx6
QNX_HOST=C:/Development/bb-ndk-3.0/host_10_0_9_52/win32/x86
QNX_CONFIGURATION=C:\Users\user\AppData\Local\Research In Motion\BlackBerry Native SDK
MAKEFLAGS=-I%QNX_TARGET%/usr/include
PATH=%QNX_HOST%\usr\bin;%QNX_CONFIGURATION%\bin;C:\Development\bb-ndk-3.0\ide\win32\x86\eclipse\jre\bin;%PATH%
PYTHONPATH=
QDE=C:\Development\bb-ndk-3.0\ide\win32\x86
or run bbndk-env.bat before starting Qt Creator:
Copy bbndk-env.bat to bin folder for QtCreator
Rename it to start-qtcreator.bat
Add there line qtcreator.exe
Run bat instead qtcreator
Ok i have done as per your updated answer, now error spoted is different than the previous one and that is "No qml Viewer installed".
I am using qt 4.5
I have created a project and I want to compile on visual studio 2008 for windows mobile 6.0
So I have created the project files doing this:
D:\Projects\Phone_PDA\Phone_PDA>set QMAKESPEC=win32-msvc2008
D:\Projects\Phone_PDA\Phone_PDA>qmake -tp vc
The VS project was created. However, when I try and compile I get this error:
LINK : fatal error LNK1181: cannot open input file 'c:\Qt\qt\lib\qtmaind.lib'
However, when I check my librarys and includes under project properties in visual studio. I have this:
Additional Include Directories
c:\Qt\qt\include\QtCore
c:\Qt\qt\include\QtGui
c:\Qt\qt\include
c:\Qt\qt\include\ActiveQt
debug
c:\Qt\qt\mkspecs\win32-msvc2008
Additional Library Directories
c:\Qt\qt\lib
Additional Dependencies
c:\Qt\qt\lib\qtmaind.lib
c:\Qt\qt\lib\QtGuid4.lib
c:\Qt\qt\lib\QtCored4.lib
However, when I browse to the directory c:\Qt\qt\lib all I have is:
qtmain.prl and qtmaind.prl
However, I don't have qtmaind.lib or qtmain.lib
Many thanks for any suggestions,
Are you sure you are using the correct QMAKESPEC?
I would think you would need to use wince*-msvc2008
See Qt: Supported Platforms
Open the Visual Studio command prompt (you can find a shortcut in the start menu). It has all the appropriate environment variables set. Go to C:\Qt\20****\qt. Type configure and then nmake.
Did you download the source distribution? If so you would need to compile Qt before you get the libs.
See:
http://doc.qtsoftware.com/4.5/install-win.html
http://doc.qtsoftware.com/4.5/install-wince.html
My commercial version comes precompiled. If I remember correctly, when I used the open source version I needed to compile everything myself.
First you have to configure the Qt to your machine to get the libs! It will takes several minutes. Follow the steps in: http://portfolio.delinkx.com/files/Qt.pdf
in properties -> linker -> input
remove ANY path for qt libraries such qtmaind.lib
sometime you need remove :
/SUBSYSTEM:WINDOWS%40QMAKE_SUBSYSTEM_SUFFIX%40) from the VS project (under Properties --> Linker --> Command Line).
this is known BUG in VS addin