Could not acquire management access for administration. Runtime Error: Unable to excute command chcp - runtime-error

I installed MySQL workbench 8.0 in windows 7. After the installation I just clicked server status its through the error like Could not acquire management access for administration. Run-time Error: Unable to execute command chcp. Please make sure that the C:Windows\System32 directory is in your path environment variable. How can I solve this error?


I solved the same problem on enable the parameter "Beta : Use UTF-8 for worldwide language support" in Control Panel > Region > Administrative > Change system locale...
It's disturbing because it's have nothing about the PATH environment variable. But it's work.
Notice that I working on french environment and MySQL Workbench 8.0.24 version.


To resolve this problem on 64 bit system we have to follow two steps.
add environment variable path to C:\Windows\System32
we need chcp.com cmd file in C:\Windows\SysWOW64
copy it from C:\Windows\System32 path and paste in C:\Windows\SysWOW64
now close mysql workbench and reopen it.
Hope you got the answer.


I've reproduced the same issue by clicking server status:
Could not acquire management access for administration
RuntimeError: Unable to execute command chcp. Please make sure that the C:\Windows\System32 directory is in your PATH environment variable
and after click cancel was:
Error during ""
error calling Python module function WbAdmin.openAdminSection
using MySQL Server 8.0.23 & MySQL Workbench 8.0.23 for 64-bit OS Windows 10.
Notice: all environment variables were configured correct in my case.
Solved it only by reinstalling and using another version like MySQL Workbench 8.0.20, but I'd really recommend also downgrade version of server to MySQL Server 8.0.20 to avoid other bugs, e.g.: creating/deleting schemes and so on.
The same version should match all products to work correctly.


Found solution for system non english language users! After failing in all attempts seen issue here: Mysql Bug Forum, where told that the problem is in unicode python codec error. So mine solution as for cyrillic language user was to set Windows administrative language for the cases when utf-8 is unavailable, see screenshot below.
"System language old value was Russian, after changing to English (USA) everything started to work.
Also watched Workbench logs - there was a python exception for the ascii codec. Thats all, hope this will help.


Add the 'C:\Windows\System32' to the PATH environment variable.
Make sure you add it to PATH and not to Path.


The solution of this problem for me was this:
Start the workbench community installer after installing the program you will go to this window enter image description here then you start the option of MySQL Server the option of "Reconfigure" and you accept all the options and create a new password (if you didn't make it before), execute the final screen and you are ready to use workbench :D


Had the same error for Windows 10. For me solution was to reinstall MySQL Server 8.0.24 and to enable option in installer "Configure MySQL Server as a Windows Service". Didn't have this option marked in the first installation, so I assume the problem was in this(there were no service for it, so after system restart MySQL Workbench 8.0 CE gave an error).


As mentioned before there are 2 possible fixes:
Change system locale to English(US)
Use Workbench ver. 8.0.22 or lower (error appears on vers. 8.0.23+)


Just add the C:\Windows\System32 to the Path, and the problem will be solved!
Don't forget to add ";" to separate addresses.

Related

Installing 32 and 64-bit Oracle client but 32-bit installer crashes

I am trying to install Oracle 12c instant 32-bit client alongside my 64-bit installation because I can't connect Visual Studio to the 64-bit version (throws BadImageFormatException). I run the installer and give it another directory for home, so it's like this:
64-bit: D:\app\MyUser\product\12.1.0\dbhome_1 (previously installed)
32-bit: D:\app\Lazar\product\12.1.0\dbhome_x84
The installer performs the checks and sends me to next step. I click install and it crashes!
Can someone please help?

I've actually run into the same problem. It looks like it is some sort of issue with the registry.
It appears to be a missing registry entry for the location of the Oracle Inventory. The below blog explains the following steps to add the missing registry key:
Open regedit
Go to HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node
Create a new key with name "Oracle"
Go to Oracle and then create a new String Value with name "inst_loc"
Give the value as "C:\Program Files (x86)\Oracle\Inventory"
Retry installation
This blog post has more detail on the fix (though not much) and is where I originally found my solution.
https://oracledba1949.wordpress.com/2016/03/11/oracle-12-1-0-2-32bit-client-installation-on-windows-2012-x64bit/

I also had the same issue and finally realized that Oracle installer doesn't support both 64bit and 32bit versions alongside. At least as you have mentioned in the question, it has got a bug. Here how I resolved the problem.
Hence both 64bit & 32bit versions unable to install alongside, first, uninstall the 64bit version.
Run the command %ORACLE_HOME%\deinstall\deinstall.bat
If any errors occur while uninstall, refer to the log and correct accordingly.
Recommend to restart the computer.
Install the 32bit version.
This will resolve your problem.

Installing MeteorJS on Windows

I've been trying to install Meteorjs on windows but error occurs. I already tried downloading another installer and restarting my computer but it doesn't work. It always pops 'failed to contact install server. Please try again' then displays the message 'One or more issues caused the setup to fail. Please fix the issues and then retry setup. For more information see the log file.'
Under that it displays '0x80070643. Fatal Error during installation.'
what to do with this?

One option is to run meteor preview for windows. Believe it is a standalone copy of meteor 1.1
https://github.com/meteor/meteor/wiki/Preview-of-Meteor-on-Windows
(this doesn't address the issue of connecting to server though because when you try to create a meteor account you get a similar error).
there definitely is a way to install through command line on windows (which annoyingly I can't remember from my other machine). Perhaps through npm...

Try to run the package as administrator.It works!

Try this guide.
Download .zip, then unzip and set path environment variable.

Web Deploy 3.5 Install Error - #2738

I'm attempting to create a custom WordPress theme using MS WebMatrix and am encountering the following error when trying to install the WP app:
Error 2738: Could not access VBScript runtime for custom action
This occurs when the download attempts to install Web Deploy 3.5. I'm currently running Windows 7 64-bit OS.
The research that I've done indicates this is error stems from "VBScript being not properly configured to run on the PC."
The solutions I've encountered and tried - to no avail - are:
Run MS FixIT
Re-registering the VBScript dll via cmd prompt - c:\windows\syswow64\regsvr32 vbscript.dll
Run the System File Checker tool sfc /scannow
[Note: I do not have, nor have I had McAfee installed - I've seen reports that in some instances the McAfee installation can cause the wrong vbscript .dll to be registered]
Outside of doing a factory wipe - which I'd like to reserve as a last resort or completely scrap using WebMatrix entirely - I've run out of potential solutions searching this specific problem.
Has anyone had success with this issue outside of the solutions posted here already? Any help would be appreciated.

So, I discovered a solution to this issue that hasn't been covered well online, so I'm posting it here.
A steadfast solution to resolving this error if running Windows 7 64-bit OS:
Open your registry editor
Start -> Search -> Type "regedit"
In the editor, click on:
HKEY_LOCAL_MACHINE\SOFTWARE\CLASSES\Wow6432Node\CLSID{B54F3741-5B07-11cf-A4B0-00AA004A55E8}\InprocServer32
Check the value for (Default)
If it's anything other than C:\Windows\SysWOW64\vbscript.dll that's where your issue is originating
Make sure you have the correct permissions to edit the value for (default)
Right Click on InprocServer32 -> Permissions -> Give yourself "Full Control"
Now edit (Default) and set it to C:\Windows\SysWOW64\vbscript.dll
Reboot
This should fix any issues that might have been encountered during the execution of custom VBScript during Web Deploy download.

Adaptive server anywhere ASA SqlAnywhere 8.0 ODBC driver

Well, I've searched the interwebs like crazy and I am unable to find this driver.
I am trying to convert data from a client's database that was built using the ASA 8.0 engine. ASA 8 has been out of support since 2008. The software company that created this no longer supports it, so can't provide me with the drivers. I've scoured the web and can't find anything.
I managed to get the installation files for this old software called BailCredit built by a company called SentryLink. I found what I presume to be the ODBC driver in the installation files (dbodbc8.dll) and I've tried manually registering that (Windows Server 2008 R2) but didn't get anywhere. When I try to create a new datasource, the ODBC Data Source Administrator gives me an error.
My company has done hundreds of data migrations and this is the first time I've had to resort to this.
I'd post a link to the database file, but simply can't because of privacy.
Please help if you can! Thanks in Advance.
Matt

For 64 Bit operating system you need to copy the dll's to %windir%\syswow64\ so you need to change install.cmd to the following code. The rest is the same.
COPY %~dp0dbcon8.dll %windir%\syswow64\dbcon8.dll
COPY %~dp0dblgen8.dll %windir%\syswow64\dblgen8.dll
COPY %~dp0dbodbc8.dll %windir%\syswow64\dbodbc8.dll
regedit %~dp0SAS8.REG
pause
It take's me a few hours to figure it out i hope it help someone else.

This is how I finally solved it.
OPTION 1:
Get a copy of the following files from a computer with a working setup of the SQL Anywhere ODBC driver:
dbodbc8.dll
dbcon8.dll
dblgen8.dll
Create an install.cmd file with this:
COPY %~dp0dbcon8.dll %SystemRoot%\system32\dbcon8.dll
COPY %~dp0dblgen8.dll %SystemRoot%\system32\dblgen8.dll
COPY %~dp0dbodbc8.dll %SystemRoot%\system32\dbodbc8.dll
regedit %~dp0SAS8.REG
pause
Create an SAS8.REG file with this:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI\Adaptive Server Anywhere 8.0]
"Driver"=hex(2):25,00,57,00,49,00,4e,00,44,00,49,00,52,00,25,00,5c,00,73,00,79,\
00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,64,00,62,00,6f,00,64,00,62,00,\
63,00,38,00,2e,00,64,00,6c,00,6c,00,00,00
"Setup"=hex(2):25,00,57,00,49,00,4e,00,44,00,49,00,52,00,25,00,5c,00,73,00,79,\
00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,64,00,62,00,6f,00,64,00,62,00,\
63,00,38,00,2e,00,64,00,6c,00,6c,00,00,00
[HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI\ODBC Drivers]
"Adaptive Server Anywhere 8.0"="Installed"
Run install.cmd
This will work when Windows is installed in C:\WINDOWS, otherwise edit the registry entries.
OPTION 2:
If someone left a copy of the Powerbuilder CD in the client's computer, look for the folder asa801runtime and install that to get the ODBC driver working
EDIT:
Example connection string with default username/password:
Driver={Adaptive Server Anywhere 8.0};UID=dba;PWD=sql;DatabaseName=base;EngineName=gestion;CommLinks=TCPIP(HOST=GRA06:2638)

Answering my own question:
I wasn't able to find this commercially available anywhere. I happened to be able to get my hands on the installation for the software package that was using SQLAnywhere 8. By installing this, it installed the necessary drivers (but only worked on 32-bit OS).

sql plus not opening after installing oracle 11g

I installed oracle 11g and im was trying to open sqlplus from command prompt but it is opening and closing in a fraction of second..I tried opening the sqlplus from the installed location as well. It still shows the same behaviour. Can anyone help me with a solution. I already uninstalled and installed the oracle twice for some other errors. Earlier it was working fine, but when I installed it the second time, sql plus is not opening .
I appreciate any advice.
Thanks

Manasa,
If the error message reads
SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory
as you stated then the answer can depend on what OS you are using. Let's say you are using some flavor of windows, you can go to the system properties -> advanced tab -> environment variables -> system variables and check the variables ORACLE_HOME and PATH.
Let's say that you installed oracle at C:\oracle\ora11\
In the PATH variable, among other values, you need to have the location of oracle bin directory; in this instance:
'C:\oracle\ora11\bin;'
Now, I should note that when oracle references the path variable, it looks for the first instance of an oracle path. So let's say you had two installations of oracle at the following locations:
'C:\oracle\ora9i\'
'C:\oracle\ora11\'
And the path variable was set like so:
'C:\oracle\9i\bin;C:\oracle\ora11\bin;'
The result would be so that when you open sqlplus, it would automatically reference the sqlplus program located at 'C:\oracle\9i\bin\' - whichever version that may be. (this would also be true for any oracle utility found in the bin directory such as DBCA or expdp) (this is also assuming you are note explicitly declaring which sqlplus you want to run i.e. you just type 'sqlplus' in a command prompt rather than 'c:\oracle\ora11\bin\sqlplus')
The oracle_home variable would be set to 'C:\oracle\ora11\' however i'll note that my windows 7 desktop version runs fine with this value null. It is, however, not a production desktop as you would imagine.

Run SQLPLUS.exe as administrator. You might have rights issue.
Thanks
shah

Resources