I am using fiber internet service that company give me a device which assign me local ip like 192.168.0.1 ,2,3 and so on to my computer/ Laptop . but I want to change my local area ip like 172.15.15.1 etc. how to route my Ip
Thanks
Well since the ip is assigned by the service provider they are probably using DHCP server to assign you ip. So you are getting those segment ip's, these are basically private class c ip address. In order to get different range of IP's you can put your intermediate router and configure it to provide private class B IP address.You might need a cross cable to connect both the routers.
Related
I am running a ddns client on Ubuntu for Nextcloud server, however my ISP has done something to the router so internet IP showing in the router is different from my public IP which causes an issue when ddclient updates the IP of my domain.
I have tried to contact my ISP but they want me to pay a huge amount for a fixed IP.
Is there any solution for this?
My router model is HG8245Q2.
*PS: The IP shown in the image is just an example.
Note: I tried this on a another router model HG8245Q, and it gives me the same IP on both router and google. so no issue on the old router model.
The IP address you see in your router is just another internal IP address from private range 10.x.x.x
This means your router is not connected directly to the internet but to another subnet of your ISP. And only this subnet is connected to the internet over another router (with NAT) and this router has a public IP address.
This is standard behavior with most of ISP because they have limited count of public IP addresses. If you need public IP, you have to pay for it, change ISP who gives you one for free or try some edge case solution like rent VPS server and make VPN tunnel to your home router (this requires advanced networking skills)
Maybe DDNS comes in handy for you. You can opt for free DDNS services like DynDDNS or NoIP.
Steps [I personally prefer noip.com ]:
Create a Free Account
Choose a hostname(We can say a domain name pointing towards ur system IP)
Download their desktop client(To sync your Dynamic IP with the hostname you selected)
Boom it's done! Use that hostname instead of IP wherever needed, traffic will be redirected to your system. Just take care of port forwarding and firewall settings.
I am trying to get IP address of Android Phone and it shows something like 192.168.0.0.But i need some thing like 10.0.2.0.Are both same?.Can anyone tell me what is the difference and How to get that address?
Thank you
Are you using AVD?
The AVD receives its network address and configuration on the private network from a DHCP server that is integrated into Virtual. The address which the virtual Device receives is usually on a completely different network to the host. As more than one card of a virtual device can be set up to use NAT networking, the first card is connected to the private network 10.0.2.0, the second card to the network 10.0.3.0 and so on.
It is highly unlikely that you have an IP with a 0 at the end because they are mostly used as the Network ID, especially with the 192.168.0.0 adress. The 10.0.2.0 and the 192.168.0.0 Adress are both IP Adresses that are in the private Range, so they are not public. I assume that you get your IP via DHCP so it depends on that DHCP Server what IP you will get. In the end of the day it doesn't really matter if you have an 10.0.xx.xx or a 192.168.0.xx Adress. Maybe I could help you a little more if you tell me why you need a 10.0.2.0 adress?
10.0.0.2 is an IP address found on many local computer networks, particularly business networks.Internet Protocol (IP) version 4 defines certain sets of IP addresses as restricted for private use (not available to be assigned to Web servers or other Internet hosts).
I use a static IP connection, Configured to TPLINK router.
I have a local server running which i can access from my network, but i want it to be accessed outside network.
So I did port forwarding. and its Successfully running.
Now the problem is :: The IP address of my WAN is also a private address like 10.10.X.X, so when am entering http://10.10.X.X, i can access my site, but not outside my network. Please guide me how to fix this?
If your WAN address is a private address, your ISP is using CGN. This is becoming more common since the RIRs have, or soon will, run out of public IP addresses to assign to ISPs. It sounds like your ISP has run out of public addresses and needs to use private addresses for its residential customers, reserving its remaining public addresses for its business customers which are willing to pay for public addresses.
Basically, your ISP is using NAT, too. You would need to have the ISP forward your port on its NAT router, but the odds of that are zero since it probably has a policy you agreed to to not host servers on your residential LAN (buried in the fine print of the ISP agreement). This situation will play out more and more over time.
You have to use the "Virtual Server" settings. Port triggering is used for.
Once the modem router is configured, the operation is as follows: 1. A local host makes an outgoing connection to an external host using a destination port number defined in the Trigger Port field. 2. The modem router records this connection, opens the incoming port or ports associated with this entry in the Port Triggering table, and associates them with the local host. 3. When necessary, the external host will be able to connect to the local host using one of the ports defined in the Incoming Ports field.
It is not used for incoming connections which are triggered from outside!
Of course, to have it working you have to have an application listening on that port not only having the firewall on Windows allowing the port.
After you set up the "Virtual Server" a port scanner should show you the port is open (even without having a running application listening) - it will try to port forward it. I use ShieldsUp for testing.
What's the difference between these 2 local ip addresses? In terms of pro's , con's and usage?
Those a simply two separate IPv4 addresses.
The 172.0.0.1 address is a public address which should not be used unless you have been assigned the address block containing it by an RIR or your ISP (which was assigned the address block containing it).
The 192.168.0.1 address is a private address which anyone may use in a private network. This address cannot be routed on the public Internet.
I suppose you are talking about 172.16.0.0 because it makes no sense to compare 172.0.0.0 with 192.168.0.0 because 172.0.0.0 is a public IP address.
If you are talking about 172.16.0.0 instead of 172.0.0.0, then... both are private IP address. They are defined in the RFC1918
There is a good overview at the Wikipedia page but the main difference is the size of the segment.
The address 172.0.0.1 is not a local address, it is a web address.
If you instead meant 127.0.0.1 this is what is refereed to as the "Loop back" IP, and is often referred to as localhost. Connections to this IP target the computer of origin, and are intercepted by the network card in your computer and fed back into the same computer.
192.168.0.1 is an IP on your local network, this may or may not be your computer. This address is assigned by your DHCP server on your local network (usualy running on the router) and is subject to change unless you have configured your DHCP server to make it static
Which to use?
172.0.0.1 Use when you are trying to connect to a website/remote computer at that IP (most likely not you)
192.168.0.1 Use when you are trying to connect a computer/device on your local network that you know will be at 192.168.0.1
127.0.0.1 or localhost Use when you are trying to connect to a port on the same computer you are already on
The router in our office is assigning 192.168.1.x , and 10.x.x.x IP addresses automatically. How do i standardize it's assigning of ip addresses as 10.x.x.x? The workstations in our office is set to obtain ip address automatically.
Usually routers provide an HTML interface for a connected device to login. Here it might be 192.168.1.0 or 10.x.x.0.You have to login to the router, and depending upon the model of the router, you can configure the ip address range for the network.