ctrl+R no longer works for executing script lines.
This is not a hardware/keyboard problem.
I have also restarted my PC.
I have tried on a different PC.
I have recently switched from using R to using RStudio. I thought this may have something to do with it, so I opened and resaved the script in RStudio, to no effect.
Furthermore, I have created an R-Project folder and have copied the files, including the script in question, into it. Then I started R-Studio and opened the project.
I would like to post my sessionInfo(), but do not know how to do that without executing the command.
Keep in mind that I only use R for stats purposes. I don't know much about informatics or other types of programming etc., so please try to keep it simple for me. Thanks!
In addition to the solution offered above, in Rstudio, Ctrl + Enter does not work if the chunk is broken in .Rmd files.
For example, if you press CTRL + Enter on the following line (2+2), it won't work:
```{r}
2+2
``
The chunk should end three Backtick characters, not two.
The problem was that the script file (for some reason unkown to me) did not have the correct extension (.R). When I added that to the script file extension, it worked fine again.
Related
I have just switched from windows 7 to windows 10 on my pc.
When I was still using windows 7, using the combination CTRL+R or CTRL+ENTER would run the line of code that I was in. Moreover, if the code continued on one or more lines below or started above my current line, it would run the entire section without me having to select it.
After switching to windows 10, the same combinations will only run the line of code that I am currently in, or the piece of code that is selected by me. To give an example:
#Tryout
for(i in 1:3){
print(i)
}
This code would normally run at once without having to select it, even when I would start in the first line (#Tryout). Now, if I don't select, I will need to use CTRL+R or CTRL+ENTER three times to go through this code and I have to start in the correct line. Starting in the line #Tryout will not run any part of the code but will only result in the line #Tryout being shown in the console.
I'm not good with computers (in your answers please pretend to be adressing a five-year-old) so I had one of my colleagues look at it who's our expert on R. Here are the findings:
The problem occurs in both RStudio as the standalone version of R.
I'm using R version 3.3.2, the same as before the windows update. Switching to version 3.5 didn't solve the problem.
I have other colleagues also using R 3.3 in combination with windows 10 for whom this problem does not occur.
Going to Tools-Global Options-Code and checking the box of 'Focus console after executing from source' doesn't help
When we went to 'Modify Keyboard Shortcuts', the name attached to the shortcut (CTRL+R or CTRL+ENTER) was the same as it was for other colleagues for which the function does run all lines in a command: 'Run Current Line or Selection'
The problem is not preventing me from using R, but it is tedious and I hope someone can help me to solve it.
Thanks so much for reading!
Click on header Tools, then Global Options..., then Code, then Ctrl + Enter Executes and choose Multi-line R statement
#M Waz & #Just Burfi: I know I can select the code and then run it, that works fine. But I don't want to have to manually select the code all the time.
#Clemsang: your answer puzzled me for a moment because I didn't have the CTRL + Enter Executes that you were referring to. I went back to my colleague who had the bright idea to check the version of RStudio that I was using.
As it turns out, I was using an old version (0.99.903). Now that I've installed a newer version (1.1.463), running the code works as before! I also have the CTRL + Enter Executes now.
I ran into a very weird problem: my R code for generating a plot only works if I type it into the console but not when I ran it inside the script (with Ctrl+Enter command)... It's the same problem with all plots (regular plots or ggplots). Also I tried it on two different computers and the same thing happened. Anyone have any idea why this is happening?
One possible reason: I installed the newest version of Rstudio on both computers so it might be an issue with the version. The exact same code worked before on an older version of rstudio...Could this be it? If so, how can I fix it?
I think I figured out what the problem was: the setting in the new version of Rstudio has a default option of outputting the plots inside the Rmarkdown script (at the very end of the script). And that's why I wasn't seeing them. You could change the setting such that it outputs in the console.
Try dev.off() to reset the graphics device.
This helps with a lot of weird graphics behaviour.
Probably too late for the original poster... However, I just ran into the same problem after installing an R update. The way I fixed it was to go to preferences, R markdown, and turn off "show inline output". For me, it was just coming out at the bottom of the chunk instead of in the plot window like I wanted. Hope that helps someone!
I just ran into this problem. I mistakenly put my plot() command inside the r markdown setup chunk. I moved it to its own code chunk and it ran as expected.
In R I always like to print out the script since it gives a good overview and one can adjust eventual errors. I like the syntax highlighting in R-Studio because it facilitates reading and fast comprehension of code.
Is there a way to print out the text with the highlighting I see in the editor?
Its not an R-Studio solution, but notepad++ will print R source with syntax highlighting.
RStudio will not print in colour, but it's easy to save the code as a PDF; in this case the syntax format is preserved. My favourite package is knitr.
library(knitr)
stitch("file_name.R")
The default output is PDF/Markup in .tex. If you prefer not to typeset, running the below will export as .html
stitch(script="file_name.R", system.file("misc", "knitr-template.Rhtml", package="knitr"))
Brief explanation
The reason this is an answer to this question in because of the last line of the question:
Is there a way to print out the text with the highlighting I see in
the editor?
so we are not limited to only and only using Rstudio software here.
After exploring the awesome answer by #rrg and realizing that it runs the code line by line, I wrote a comment below his answer and continued googling. My problem is that the code I wrote is so large and so time consuming to run that running it for the sake of having a syntax highlighted version is not feasible.
Most of the solution out there online involves having notepad++ which is a Windows application and I'm a dedicated Linux user, so I searched for a way I can do this in Linux (and possibly Mac)
The way I solved it:
Inspired by a blog post, I used the famous and beloved Vim to convert R to syntax highlighted HTML and then because you can open HTML in your browser, you can what ever you want with it (print, screenshot, etc.)
Activate synax highlighting in Vim:
open terminal
then open the vim config file by typing vim ~/.vimrc
press i from keyboard to go to "insert mode"
go to the end of the file using arrow keys on your keyboard
type syntax on at the end of the file
now you need to save and exit. For this you need to press Esc button from keyboard to come out of "insert mode" and then type :x and press Enter to save and close the file.
if you want to change the color scheme of the syntax highlighting, visit the bottom part of this website
From terminal open your file with Vim:
vim YOUR_FILE_PATH
Having you R code open in vim, you can turn on the line numbers if you like by pressing Esc and then write :set number and press Enter.
For converting R to HTML, press Esc to make sure you are not in "insert mode" and then type :TOhtml and press Enter. This will result is having a split window in terminal, half is your R code and the other half id your new HTML code.
For saving the files, type :x along with Enter button from keyboard twice to save both files (your R file will be unchanged if you have not typed anything extra in it and your HTML file will be created with the same name near your R code)
Now open it with your favorite browser (in my case Vivaldi) and do what ever you want (in my case converting the whole HTML into PNG)
Best way:
download https://github.com/jaredpetersen/codeprinter and paste in the r code. then choose syntax highlighting Xcode
For those using a Mac (and thus without access to Notepad++) cutting and pasting into Xcode and printing from there will also work.
As with Ron Jensen's earlier comment, this isn't an R Studio solution, but in the interests of "just getting it to work", I hope this helps someone.
Has anyone managed to get color syntax-highlighting working in the output of Sweave documents? I've been able to customize the output style by adding boxes, etc. in the Sweave.sty file as follows:
\DefineVerbatimEnvironment{Sinput}{Verbatim}{fontseries=bc,frame=single}
\DefineVerbatimEnvironment{Soutput}{Verbatim}{frame=leftline}
\DefineVerbatimEnvironment{Scode}{Verbatim}{fontseries=bc}
And I can get the minted package to do syntax highlighting of verbatim-code blocks in my document like so:
\begin{minted}{perl}
use Foo::Bar;
...
\end{minted}
but I'm not sure how to combine the two for R input sections. I tried the following:
\DefineVerbatimEnvironment{Sinput}{minted}{r}
\DefineVerbatimEnvironment{Scode}{minted}{r}
Any suggestions?
Yes, look at some of the vignettes for Rcpp as for example (to pick just one) the Rcpp-FAQ pdf.
We use the highlight by Romain which itself can farm out to the hightlight binary by Andre Simon. It makes everything a little more involved---Makefiles for the vignettes etc pp---but we get colourful output from R and C/C++ code. Which makes it worth it.
I have a solution that has worked for me, I have not tried it on any other systems though so things may not work out of the box for you. I've posted some code at https://gist.github.com/797478 that is a set of modified Rweave driver functions that make use of minted blocks instead of verbatim blocks.
To use this driver just specify it when calling the Sweave function with the driver=RweaveLatexMinted() option.
Here's how I've ended up solving it, starting from #daroczig's suggestion.
\usepackage{minted}
\renewenvironment{Sinput}{\minted[frame=single]{r}}{\endminted}
\DefineVerbatimEnvironment{Soutput}{Verbatim}{frame=leftline}
\DefineVerbatimEnvironment{Scode}{Verbatim}{}
While I was at it, I needed to get caching working because I'm using large data sets and one chunk was taking around 3 minutes to complete. So I wrote this zsh shell function to process an .Rnw file with caching:
function sweaveCache() {
Rscript -e "library(cacheSweave); setCacheDir(getwd()); Sweave('$1.Rnw', driver = cacheSweaveDriver)" &&
pdflatex --shell-escape $1.tex &&
open $1.pdf
}
Now I just do sweaveCache myFile and I get the result opened in Preview (on OS X).
This topic on tex.StackExchange might be interesting for you, as it suggest loading the SweaveListingUtils package in R for easy solution.
I am having some problems with my clipboard contents when using R. When I run my scripts/commands in tinn-r, very often I would get something that I had ran earlier pasted onto my R Console instead of the command that I have just selected.
To get over this, I would go to my clipboard and delete its content(text/syntax). However, the same text/syntax that I had just deleted would re-appear on my clipboard and would again appear on my R Console when trying to run a different syntax from my tinn-r.
Good luck. Tinn-R seems to be a particularly buggy way of interacting with R. Though it takes some effort to set up, the StatET plugin interface from Eclipse has been working way better for me than Tinn-R ever did.