I have deployed openstack/base on MaaS as indicated here. After I tried to deploy charmed-kubernetes with an openstack-integrator and vault overlay, I cannot perform openstackclient commands on the maas node and the images uploaded to the dashboard are not recognized, that means, the ubuntu charms cannot be deployed. When I do, for example,
openstack catalog list
I get
Failed to discover available identity versions when contacting https://keystone_ip:5000/v3. Attempting to parse version from URL.
SSL exception connecting to https://keystone_ip:5000/v3/auth/tokens: HTTPSConnectionPool(host='keystone_ip', port=5000): Max retries exceeded with url: /v3/auth/tokens (Caused by SSLError(SSLCertVerificationError(1, '[SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: unable to get local issuer certificate (_ssl.c:1108)')))
However, when I ssh into the keystone container, there is a keystone_juju_ca_cert.crt which has as
Issuer: CN = Vault Root Certificate Authority (charm-pki-local)
and as
Subject: CN = Vault Root Certificate Authority (charm-pki-local)
I have also tried to reissue the certificates and refresh the secrets through actions in the vault application, but to no avail.
Can somobody help me here ?
I don't know anything about juju or openstack, but it looks to me like the problem isn't on the keystone container, but on your local machine (or wherever you are running this openstack catalog list command. The local machine doesn't appear to have the charm-pki-local CA certificate installed, so it can't verify the connection to the keystone server.
You need to get root ca from vault using juju and then reference that file in openrc file as OS_CACERT environment variable
I launched a WordPress instance in EC2 in AWS. Now I can access WordPress Dashboard. But how to access database? If I install WordPress in my PC I can easily access it via a local-host link. From AWS how can I access the same? Also, is there any possibility to connect the MySQL database via MySQL Workbench?
Thanks
Venkat
Venkata, you are able to access WordPress hosted on EC2 because the http port and https port is open in the firewall, check your inbound settings in security group.
You can access your MySQL Database hosted in same EC2 instance (in this specific case) if you can open the port for access, in inbound settings. Make sure you have a MySQL user created and you have user name and password for the user.
First On EC2 instance you have to configure complete LAMP stack and than you have to open the port from security groups from AWS console admin.
After installing LAMP stack and opening port you have to place adminer.php file on the /var/www/html directory or the directory where you installed the wordpress.
after that you can access the database and the wordpress
I am getting error:
"Lost connection to MySQL server at 'reading initial communication packet, system error: 0"
while I am going to connect my db.
If I am using localhost everything is working fine.
But when I am using my live IP address like below, it's getting error:
mysql_connect("202.131.xxx.106:xxxx", "xxxx", "xxxxx") or die(mysql_error());
Someone here suggests that it might be a firewall problem:
I have just had this problem and found it was my firewall. I use PCTools Firewall Plus and it wasn't allowing full access to MySQL. Once I changed that it was fine.
Could that be it?
Also, someone here suggests that it might be because the MySQL server is bound to the loop-back IP (127.0.0.1 / localhost) which effectively cuts you off from connecting from "outside".
If this is the case, you need to upload the script to the webserver (which is probably also running the MySQL server) and keep your server host as 'localhost'
Open mysql configuration file named my.cnf and try to find "bind-address", here replace the setting (127.0.0.1 OR localhost) with your live server ip (the ip you are using in mysql_connect function)
This will solve the problem definitely.
Allow remote connect to MySQL.
Edit file:
>sudo nano /etc/mysql/my.cnf
Comment line:
#bind-address = 127.0.0.1
Restart MySQL:
>sudo service mysql restart
Create user for remote connection.
>mysql -uroot -p
CREATE USER 'developer'#'localhost' IDENTIFIED BY 'dev_password';
CREATE USER 'developer'#'%' IDENTIFIED BY 'dev_password';
GRANT ALL ON *.* TO 'developer'#'localhost';
GRANT ALL ON *.* TO 'developer'#'%';
In my case I need to connect remotely from Windows to VirtualBox machine with Ubuntu. So I need to allow port 3306 in iptables:
>iptables -A INPUT -i eth0 -p tcp -m tcp --dport 3306 -j ACCEPT
Had this problem when setting up a new slave server. Found it was the slave server IP address was missing from the master server /etc/hosts.allow file. Added the IP address and it let me connect to the master server.
Note that I use hosts.allow and hosts.deny to control access.
I had this problem and it ended up being the prior sys admin changed the port MySQL was running on. MySQL Workbench was trying to connect to the default 3306 but the server was running on 20300.
The error means that it didn't receive a response from the port it expected to find the server on. The causes range from contacting the wrong machine (For one of a number of reasons) to the server not being on the expected port.
Check which port your server is bound to in /etc/mysql/my.cnf. Does that correspond to what is in your connect statement. If they match then try connecting with mysql from the server itself and from the command line of the machine where you are running the client. If it works form one place and not another then you may have a firewall / router configuration issue.
One more reason...
I ran into an Ubuntu server where everything was customized and could not connect because of that same error.
This setting was inside /etc/ssh/sshd_config
PermitTunnel no
After turning into
PermitTunnel yes
I was able to connect remotely to my MySQL DB
The problem on my case was MySQL being bind only to the lo on linux.
in order to solve the problem i have edited the my.cnf (found at /etc/mysql/my.cnf) removing the line bind-address=127.0.0.1
this allows mysql to bind to any network interface
I just set up mysql on a windows box. I got the OP's error when trying to connect with the Navicat MySql client on the same box. I had to specify 127.0.0.1 as the host, and that got it.
localhost, or the servers actual ip address both did not work.
This error occurred to me while trying to connect to the Google Cloud SQL using MySQL Workbench 6.3.
After a little research I found that my IP address has been changed by the internet provider and he was not allowed in the Cloud SQL.
I authorized it and went back to work.
I faced the same problem. I checked and tried to set AllowTcpForwarding Yes but it was missing in my sshd_config so no help.I didn't change sshd_config or my.cnf. Make sure the ssh hostname is NOT the same with the mysql hostname(use localhost).
In workbench, choose + to add new connection and set the following:
connection method: standard TCP/IP over SSH
SSH Hostname: 192.168.0.50:22 (replace remote SSH server IP and port(optional))
SSH Username: sshuser
You can set password or add at the prompt
MYSQL Hostname: localhost or 127.0.0.1
MYSQL Server port:3306
You can set password or add at the prompt
Test connection. It should be successful then hit OK.Viola!
I ran into this exact same error when connecting from MySQL workbench. Here's how I fixed it. My /etc/my.cnf configuration file had the bind-address value set to the server's IP address. This had to be done to setup replication. Anyway, I solved it by doing two things:
create a user that can be used to connect from the bind address in the my.cnf file
e.g.
CREATE USER 'username'#'bind-address' IDENTIFIED BY 'password';
GRANT ALL PRIVILEGES ON schemaname.* TO 'username'#'bind-address';
FLUSH PRIVILEGES;
change the MySQL hostname value in the connection details in MySQL workbench to match the bind-address
The problem for me was that DNS queries were blocked by the FW within the subnet. The solution was to disable DNS lookups within MySQL.
The problem was quite stupid for me.
I used to get the same issue on AWS EC2 Ubuntu machine (MariaDB is installed locally for the time being), so I tried to make SSH tunneling, and had the same issue. So I tried to ssh tunnel over terminal:
ssh -L13306:127.0.0.1:3306 root#ip.address -i my/private/key.pem
And it told me this:
Please login as the user "ubuntu" rather than the user "root".
I changed ssh user from root to ubuntu, just like my ssh config, and it connected just fine.
So check your SSH connecting user.
I oversaw this, so this too half an hour of my time, so I hope this will be useful for you.
For me the config file was found "/etc/mysql/mysql.conf.d/mysqld.cnf" commenting out bind address did the trick.
As we can see here:
Instead of skip-networking the default is now to listen only on
localhost which is more compatible and is not less secure.
I am trying to connect my db docker container on Ubuntu 18.04, same problem.
First check your device by run nmcli dev to check if device docker0 is connected.
If it is not connected, try to restart docker service:
sudo service docker restart
I tried make a telnet over remote server on port 3306.
The error message is clear
Host 'x.x.x.x' is blocked because of many connection errors; unblock with 'mysqladmin flush-hosts'Connection closed by foreign host.
As root at server mysqladmin flush-hosts worked at all!
I had the same error when using localhost. I restarted the MySQL service and it worked fine.
in my case, I had ALL: ALL in hosts.deny. Changing this to ALL: PARANOID solved my problem when connecting over ssh
Ran into this same issue, Bind Address back and forth to no avail. Solution for me was flushing privileges.
mysql> FLUSH PRIVILEGES;
Firewalld blocks the IP address. so to give access, use these commands:
firewall-cmd --permanent --zone=trusted --add-source=YOUR_IP/32
firewall-cmd --permanent --zone=trusted --add-port=3306/tcp
firewall-cmd --reload
For me setting bind-address = 0.0.0.0 in mysql/my.cnf worked. It basically listens to all addresses (but still one port) then.
And don't forget restart your server: systemctl restart mysql
I just had the same problem, but in my case I solved it with
service mysqld start
In my case it was the university wifi blocking port 3306. I was able to connect by using a mobile hotspot.
Change to a mobile hotspot or another network, and if it works there, then you know that original network is blocking port 3306. If you get the same error on more than 1 network, then you know it's specific to your machine.
I had port 3306 in Docker container but in Dockerfile it was 33060. I edited the port in Docker container to 33060
Must have been added to the Dockerfile
ENV MYSQL_ROOT_HOST 172.17.0.1
I have done below 3 steps then working for me.
bind-address = "YOUR MACHINE IP" in my.cnf file at /etc/my.cnf
Restart service by command : service mysql restart
GRANT ALL PRIVILEGES ON yourDB.* TO 'username'#'YOUR_APPLICATION_IP' IDENTIFIED BY 'YOUR_PASSWORD' WITH GRANT OPTION;
I had the same issue installing MySQL docker image then trying to connect from WSL2 MySQL client.
As it was stated in the accepted answer that it should be a firewall issue, in my case this error was caused due to not allowing docker for windows to communicate to private network.
I changed the settings on "Firewall & network protection", "allow an app through firewall", "change settings" (need administrator rights) and allowed "Docker desktop backend" to connect to private network.
I had the same error on my Mac with a local MySQL installation. The problem was that the number files that MySQL was opening was too high for MacOS.
To see if you have the same problem you can run this command and look for File Descriptor errors:
tail -200 /usr/local/var/mysql/$(whoami).err | grep "Warning"
I added this line to my.cnf file and the problem was fixed:
table_open_cache = 200
Had the same problem, what worked for me was:
Go to Windows Firewall where you allow applications.
mysql probably won't be in the list, so you need to add it, its path is typically C:/Program Files (x86)/MySQL/bin/mysql
Mark both private and public networks, apply.
When connecting to Mysql remotely, I got the error.
I had this warning in /var/log/mysqld.log:
[Warning] IP address 'X.X.X.X' could not be resolved: Temporary failure in name resolution
I just added this line to /etc/hosts file:
X.X.X.X some_name
Problem solved! Not using skip-name-resolve caused some errors in my local app when connecting to MySQL.
I'm trying to SFTP Compute Engine from MAC using Filezilla. I can SSH with port 22 without any problem. But I need R/W/D access to my files and trying SFTP to port 21 and getting the following error,
Command: keyfile "/bitnami-google-api-project-4xxxxxxxxxx.pem"
Command: open "bitnami#104.xxx.xxx.xxx" 21
Error: Connection refused
Error: Could not connect to server
I referred a couple of similar threads here nothing make this work, sofar I did,
Bitnami Key added in Google Compute Engine and both are same Added.
PEM key file (MAC) in FileZilla settings.
I'm using root password with default username
Anything I'm missing from the doc to follow to get access through 21?
SFTP runs over an SSH session, usually on TCP port 22. In the Bitnami Stack SFTP is configured to use port 22. In the link below you will find information about how to upload files using SFTP using Bitnami Cloud Images on Google Cloud:
https://docs.bitnami.com/google/faq/#how-to-upload-files-to-the-server-with-sftp
If you want to use SFTP on any other port, you need to open that port on your server and configure SFTP to use port 21. You can open a port on your server following the steps described in the guide below:
https://docs.bitnami.com/google/faq/#how-to-open-the-server-ports-for-remote-access