Hi I tried to clone the repository and build the source as mentioned in the opendaylight wiki page. But the build is failing.
Link: https://wiki.opendaylight.org/view/OpenDaylight_Controller:Netconf:Testtool#Building_testtool
The following are the steps I followed:
Check out latest netconf repository from git
Dive into netconf/netconf/tools/netconf-testtool/ folder
Build testtool using mvn clean install command
The build fails with the following error trace:
[INFO] Scanning for projects...
[ERROR] [ERROR] Some problems were encountered while processing the POMs:
[FATAL] Non-resolvable parent POM for org.opendaylight.netconf:netconf-parent:1.5.0-SNAPSHOT: Could not find artifact org.opendaylight.mdsal:binding-parent:pom:0.13.0-SNAPSHOT and 'parent.relativePath' points at no local POM # org.opendaylight.netconf:netconf-parent:1.5.0-SNAPSHOT, /home/balakrishnan/netconf_simulator/netconf/netconf/netconf-parent/pom.xml, line 11, column 11
#
[ERROR] The build could not read 1 project -> [Help 1]
[ERROR]
[ERROR] The project org.opendaylight.netconf:netconf-testtool:1.5.0-SNAPSHOT (/home/balakrishnan/netconf_simulator/netconf/netconf/tools/netconf-testtool/pom.xml) has 1 error
[ERROR] Non-resolvable parent POM for org.opendaylight.netconf:netconf-parent:1.5.0-SNAPSHOT: Could not find artifact org.opendaylight.mdsal:binding-parent:pom:0.13.0-SNAPSHOT and 'parent.relativePath' points at no local POM # org.opendaylight.netconf:netconf-parent:1.5.0-SNAPSHOT, /home/balakrishnan/netconf_simulator/netconf/netconf/netconf-parent/pom.xml, line 11, column 11 -> [Help 2]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please read the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/ProjectBuildingException
[ERROR] [Help 2] http://cwiki.apache.org/confluence/display/MAVEN/UnresolvableModelException
The build needs artifacts which your Maven setup doesn’t know about. You need to edit your settings.xml file; if you’re running in a Unix-style environment:
cp -n ~/.m2/settings.xml{,.orig}
wget -q -O - https://raw.githubusercontent.com/opendaylight/odlparent/master/settings.xml > ~/.m2/settings.xml
This will configure Maven to download OpenDaylight artifacts from the OpenDaylight Nexus repositories; you will then be able to build netconf-testtool directly.
You need to build the entire netconf project (ie mvn install) from the top-down.
Related
Similar to the problem outlined here trying to build a the (newer) Artifactory OSS 7.46.11 fails on non-resolvable artifacts. Adding JCenter does not work anymore as a solution because JCenter is dead and apparently the read-only archive version also doesn't provide the artifactory-parent-pom artifact:
$ mvn --settings ~/.m2/settings-artifactory.xml -DdownloadSources=true -U clean install -P release
[INFO] Scanning for projects...
Downloading from jcenter: https://jcenter.bintray.com/org/artifactory/artifactory-parent-pom/7.x-SNAPSHOT/maven-metadata.xml
Downloading from jcenter: https://jcenter.bintray.com/org/artifactory/artifactory-parent-pom/7.x-SNAPSHOT/artifactory-parent-pom-7.x-SNAPSHOT.pom
[ERROR] [ERROR] Some problems were encountered while processing the POMs:
[FATAL] Non-resolvable parent POM for org.artifactory:artifactory-parent:7.x-SNAPSHOT: Could not find artifact org.artifactory:artifactory-parent-pom:pom:7.x-SNAPSHOT in jcenter (https://jcenter.bintray.com/) and 'parent.relativePath' points at wrong local POM # line 29, column 13
#
[ERROR] The build could not read 1 project -> [Help 1]
[ERROR]
[ERROR] The project org.artifactory:artifactory-parent:7.x-SNAPSHOT (/home/siepkes/git/artifactory/pom.xml) has 1 error
[ERROR] Non-resolvable parent POM for org.artifactory:artifactory-parent:7.x-SNAPSHOT: Could not find artifact org.artifactory:artifactory-parent-pom:pom:7.x-SNAPSHOT in jcenter (https://jcenter.bintray.com/) and 'parent.relativePath' points at wrong local POM # line 29, column 13 -> [Help 2]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please read the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/ProjectBuildingException
[ERROR] [Help 2] http://cwiki.apache.org/confluence/display/MAVEN/UnresolvableModelException
~/.m2/settings-artifactory.xml looks like this:
<?xml version="1.0"?>
<settings>
<profiles>
<profile>
<id>artifactory</id>
<repositories>
<repository>
<id>jcenter</id>
<name>Bintray JCenter</name>
<url>https://jcenter.bintray.com/</url>
</repository>
</repositories>
</profile>
</profiles>
<activeProfiles>
<activeProfile>artifactory</activeProfile>
</activeProfiles>
</settings>
EDIT: This seems to be caused by long standing (since 2021) open issue RTFACT-26254.
I have downloaded Kafka from apache and extracted it to its own folder. Following the quickstart, I also installed sbt, but at the third line in the sbt commands (I am launching the terminal from INSIDE the kafka folder, I get:
[error] Not a valid command: assembly-package-dependency
[error] Not a valid project ID: assembly-package-dependency
[error] Expected ':' (if selecting a configuration)
[error] Not a valid key: assembly-package-dependency (similar: sbt-dependency)
[error] assembly-package-dependency
[error] ^
I have been looking for all day for an answer, but found none which would start my server. The exception when I try the kafka-server-start.sh is always
unable to find main class Kafka.kafka
I also tried "gradle" the first time, but the problem was the same. I have no chance of upgrading to Cloudera-Express to use the parcel installer: my PC is not good enough to support it.
I am quite desperate: please help me!
I found that sbt update etc didn't quite do the job, so in the end I found another answer suggesting:
In the kafka folder:
./gradlew jar
I downloaded the scalafx-ensemble project. When I run sbt in the project's folder I'm facing the following error:
[info] Set current project to scalafxEnsemble (in build file:/C:/dev/sample/scalafx-ensemble-master/)
[ERROR] Terminal initialization failed; falling back to unsupported
java.lang.IncompatibleClassChangeError: Found class jline.Terminal, but interface was expected
at jline.TerminalFactory.create(TerminalFactory.java:101)
at jline.TerminalFactory.get(TerminalFactory.java:159)
at sbt.JLine$.sbt$JLine$$terminal(LineReader.scala:87)
at sbt.JLine$.withTerminal(LineReader.scala:91)
at sbt.JLine$.usingTerminal(LineReader.scala:97)
at sbt.JLine$.createReader(LineReader.scala:103)
at sbt.FullReader.<init>(LineReader.scala:135)
at sbt.BasicCommands$$anonfun$shell$1.apply(BasicCommands.scala:149)
...
java.lang.IncompatibleClassChangeError: Found class jline.Terminal, but interface was expected
at sbt.JLine$$anonfun$usingTerminal$1.apply(LineReader.scala:98)
at sbt.JLine$$anonfun$usingTerminal$1.apply(LineReader.scala:97)
at sbt.JLine$.withTerminal(LineReader.scala:92)
at sbt.JLine$.usingTerminal(LineReader.scala:97)
at sbt.JLine$.createReader(LineReader.scala:103)
at sbt.FullReader.<init>(LineReader.scala:135)
at sbt.BasicCommands$$anonfun$shell$1.apply(BasicCommands.scala:149)
at sbt.BasicCommands$$anonfun$shell$1.apply(BasicCommands.scala:146)
at sbt.Command$$anonfun$command$1$$anonfun$apply$1.apply(Command.scala:31)
at sbt.Command$$anonfun$command$1$$anonfun$apply$1.apply(Command.scala:31)
at sbt.Command$.process(Command.scala:95)
at sbt.MainLoop$$anonfun$1$$anonfun$apply$1.apply(MainLoop.scala:100)
...
[error] java.lang.IncompatibleClassChangeError: Found class jline.Terminal, but interface was expected
[error] Use 'last' for the full log.
If I run sbt run I'm getting the following:
at scala.tools.nsc.typechecker.Typers$Typer.doTypedApply(Typers.scala:3193)
at scala.tools.nsc.typechecker.Typers$Typer.handleOverloaded$1(Typers.scala:3190)
at scala.tools.nsc.typechecker.Typers$Typer.doTypedApply(Typers.scala:3193)
at scala.tools.nsc.typechecker.Typers$Typer.handleOverloaded$1(Typers.scala:3190)
[error] (compile:compile) java.lang.StackOverflowError
[error] Total time: 9 s, completed Jan 6, 2014 4:47:49 PM
What am I doing wrong?
This is likely problem with outdated SBT launcher. Make sure that your SBT is v.0.13 or newer.
I fixed the path to jfxrt.jar in build.sbt from
System.getenv("JAVA_HOME") + "jre/lib/jfxrt.jar"
to
System.getenv("JAVA_HOME") + "/lib/jfxrt.jar"
which is correct for my system. With the change, sbt run works fine.
I downloaded the latest BoneCP source code from following Github URL:
https://github.com/wwadge/bonecp/archive/master.zip
When I try to build this source using maven there are some issues in compiling
bonecp-hbnprovider module. Initially I was getting the following error:
Non-resolvable parent POM: Could not find artifact com.jolbox:bonecp-parent:pom:0.8.0-rc1-SNAPSHOT and 'parent.relativePath' points at wrong local POM # line 19, column 13 -> [Help 2]
After changing 0.8.0-rc1-SNAPSHOT to 0.8.0-rc2-SNAPSHOT in the pom.xml of bonecp-hbnprovider I am getting the following error:
[ERROR] Failed to execute goal on project bonecp-provider: Could not resolve dependencies for project com.jolbox:bonecp-provider:bundle:0.8.0-rc2-SNAPSHOT: Could not find artifact com.jolbox:bonecp:jar:0.8.0-rc2-SNAPSHOT in spring-milestone (http://s3.amazonaws.com/maven.springframework.org/milestone) -> [Help 1]
Please let me know how to resolve this issue?
What's the command you're using? Try with: mvn clean install
[UPDATE]
the clean goal runs smoothely all over the projects of the solution, the problem now while running the compile goal, below the error message:
[INFO] Total time: 19.427s
[INFO] Finished at: Fri Jun 29 11:46:28 WEST 2012
[INFO] Final Memory: 15M/306M
[INFO] ------------------------------------------------------------------------
[ERROR] Failed to execute goal org.apache.npanday.plugins:maven-aspx-plugin:1.4.0-incubating:compile (default-compile) on project B3GMcsInterface: NPANDAY-900-006: Unable to Compile: Language = ASP, Vendor = null, ArtifactType = asp, Source Directory = C:\Users\CASA-WS001\Desktop\Gateway\ProjectName: NPANDAY-040-001: Could not execute: Command = cmd.exe /X /C "aspnet_compiler -v " /MyArtifactId" -p C:\Users\CASA-W~1\AppData\Local\Temp\maven-aspx-plugin-3088047295012139775\src -u -f C:\Users\CASA-W~1\AppData\Local\Temp\maven-aspx-plugin-3088047295012139775\dest -nologo -fixednames", Result = 1 -> [Help 1]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please read the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/MojoExecutionException
[ERROR]
[ERROR] After correcting the problems, you can resume the build with the command
[ERROR] mvn -rf :B3GMcsInterface
NPanday Execution Failed!, with exit code: 1
[END OF UPDATE]
i'm trying to make the build of simple web application using NPanday, i am using the incubating 1.4.0 plugin for VS2010, i have successfully built C# Console or Libraries Projects using maven, but when i tried to clean a web application i encounter this kind of error
Below is the error output.
[INFO] ------------------------------------------------------------------------
[INFO] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 1.628s
[INFO] Finished at: Tue Jun 26 17:53:56 WET 2012
[INFO] Final Memory: 6M/16M
[INFO] ------------------------------------------------------------------------
[ERROR] Error resolving version for plugin 'npanday.plugin:maven-aspx-plugin' from the repositories [local (C:\Users\user1.m2\repository), central (http://repo.maven.apache.org/maven2)]: Plugin not found in any plugin repository -> [Help1]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please read the following articles:
[ERROR] [Help 1]
http://cwiki.apache.org/confluence/display/MAVEN/PluginVersionResolutionException
any help is appreciated.
Thank You.
The problem is the "npanday.plugin" in "npanday.plugin:maven-aspx-plugin"... It must be wrongly stated in one of the life cycles.
Things have moved to "org.apache.npanday.plugins": http://search.maven.org/#search%7Cga%7C1%7Ca%3A%22maven-aspx-plugin%22
Try using 1.5.0-SNAPSHOT from the following repository. It contains a mass of improvements! I'm using it in production.
<pluginRepositories>
<pluginRepository>
<releases>
<enabled>false</enabled>
</releases>
<id>npanday.snapshots</id>
<name>NPanday Snapshot Repository</name>
<url>http://vmbuild.apache.org/archiva/repository/npanday-snapshots</url>
</pluginRepository>
</pluginRepositories>
I think you have to use a repository manager and define a supplemental repository which contains the given dependencies / plugins.
Error is related plugins order in pom.xml:
If maven-compile-plugin is before maven-aspx-plugin, you get the error.
But if the order is maven-aspx-plugin and then maven-compile-plugin, mvn compile works
Snip of the correct pom.xml:
....
<plugins>
<plugin>
<groupId>org.apache.npanday.plugins</groupId>
<artifactId>maven-aspx-plugin</artifactId>
<extensions>true</extensions>
<configuration>
<frameworkVersion>4.0</frameworkVersion>
</configuration>
</plugin>
<plugin>
<groupId>org.apache.npanday.plugins</groupId>
<artifactId>maven-compile-plugin</artifactId>
<version>1.4.0-incubating</version>
<extensions>true</extensions>
....