Hi I tried to clone the repository and build the source as mentioned in the opendaylight wiki page. But the build is failing.
Link: https://wiki.opendaylight.org/view/OpenDaylight_Controller:Netconf:Testtool#Building_testtool
The following are the steps I followed:
Check out latest netconf repository from git
Dive into netconf/netconf/tools/netconf-testtool/ folder
Build testtool using mvn clean install command
The build fails with the following error trace:
[INFO] Scanning for projects...
[ERROR] [ERROR] Some problems were encountered while processing the POMs:
[FATAL] Non-resolvable parent POM for org.opendaylight.netconf:netconf-parent:1.5.0-SNAPSHOT: Could not find artifact org.opendaylight.mdsal:binding-parent:pom:0.13.0-SNAPSHOT and 'parent.relativePath' points at no local POM # org.opendaylight.netconf:netconf-parent:1.5.0-SNAPSHOT, /home/balakrishnan/netconf_simulator/netconf/netconf/netconf-parent/pom.xml, line 11, column 11
#
[ERROR] The build could not read 1 project -> [Help 1]
[ERROR]
[ERROR] The project org.opendaylight.netconf:netconf-testtool:1.5.0-SNAPSHOT (/home/balakrishnan/netconf_simulator/netconf/netconf/tools/netconf-testtool/pom.xml) has 1 error
[ERROR] Non-resolvable parent POM for org.opendaylight.netconf:netconf-parent:1.5.0-SNAPSHOT: Could not find artifact org.opendaylight.mdsal:binding-parent:pom:0.13.0-SNAPSHOT and 'parent.relativePath' points at no local POM # org.opendaylight.netconf:netconf-parent:1.5.0-SNAPSHOT, /home/balakrishnan/netconf_simulator/netconf/netconf/netconf-parent/pom.xml, line 11, column 11 -> [Help 2]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please read the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/ProjectBuildingException
[ERROR] [Help 2] http://cwiki.apache.org/confluence/display/MAVEN/UnresolvableModelException
The build needs artifacts which your Maven setup doesn’t know about. You need to edit your settings.xml file; if you’re running in a Unix-style environment:
cp -n ~/.m2/settings.xml{,.orig}
wget -q -O - https://raw.githubusercontent.com/opendaylight/odlparent/master/settings.xml > ~/.m2/settings.xml
This will configure Maven to download OpenDaylight artifacts from the OpenDaylight Nexus repositories; you will then be able to build netconf-testtool directly.
You need to build the entire netconf project (ie mvn install) from the top-down.
When setting up https://github.com/roger3cev/corda-training-template on Windows I get the following stack trace. It appears to be an issue a file name ending in .crypto
What went wrong:
Could not resolve all files for configuration ':java-source:compileClasspath'.
Could not resolve net.i2p.crypto:eddsa:0.2.0.
Required by:
project :java-source > net.corda:corda-core:1.0.0
Could not resolve net.i2p.crypto:eddsa:0.2.0.
Could not get resource 'https://jcenter.bintray.com/net/i2p/crypto/eddsa/0.2.0/eddsa-0.2.0.pom'.
Failed to move file 'C:\Users\A57C\AppData\Local\Temp\gradle_download2832834655657514563bin' into filestore at 'C:\Users\A57C\.gradle\caches\modules-2\files-2.1\net.i2p.crypto\eddsa\0.2.0\d2905a940ee7c59e1636e1c3541069ccbbcdf227\eddsa-0.2.0.pom'
Failed to create parent directory 'C:\Users\A57C\.gradle\caches\modules-2\files-2.1\net.i2p.crypto' when creating directory 'C:\Users\A57C\.gradle\caches\modules-2\files-2.1\net.i2p.crypto\eddsa\0.2.0\d2905a940ee7c59e1636e1c3541069ccbbcdf227'
Could not resolve net.i2p.crypto:eddsa:0.2.0.
How can I successfully import this dependency?
A direct download of eddsa 0.2.0 from MVNRepository resolved the issue: https://mvnrepository.com/artifact/net.i2p.crypto/eddsa/0.2.0
mvn install:install-file "-Dfile=eddsa-0.2.0.jar" "-DgroupId=net.i2p.crypto" "-DartifactId=eddsa" "-Dversion=0.2.0" "-Dpackaging=jar"
AddcordaCompile "net.i2p.crypto:eddsa:0.2.0" to the build.gradle in kotlin-source and java-source to import the artifact.
Description
I am experiencing unexpected errors when running polymer build after installing and using tur-nr/polymer-redux. Here is the demo repo.
Versions & Environment
polymer-build: v0.18.3 polymer --version
node: v6.10.2
Operating System: macOS Sierra v10.12.4
Steps to reproduce
terminal
git clone https://github.com/maria-le/redux # clone remote repo to your local
cd redux # cd into your local repo
bower install # install bower dependencies
npm install redux # install redux
polymer build # attempt build
Expected results
I expect the build to complete, without errors. Then allow me to serve the packaged build.
Actual results
I get the following errors in the terminal.
Error messages
src/all-locally.html(14,16) error [unknown-polymer-behavior] - Unable to resolve behavior store. Did you import it? Is it annotated with #polymerBehavior?
ReduxStore
src/imported-behavior.html(7,16) error [unknown-polymer-behavior] - Unable to resolve behavior ReduxStore. Did you import it? Is it annotated with #polymerBehavior?
polymerStore
src/imported-store-as-variable.html(10,16) error [unknown-polymer-behavior] - Unable to resolve behavior polymerStore. Did you import it? Is it annotated with #polymerBehavior?
PolymerRedux(reduxStore)
src/imported-store.html(7,16) warning [could-not-determine-behavior-name] - Could not determine behavior name from expression of type
CallExpression
error: Promise rejection: Error: 3 error(s) occurred during build.
error: Error: 3 error(s) occurred during build.
at BuildAnalyzer._done (/usr/local/lib/node_modules/polymer-cli/node_modules/polymer-build/lib/analyzer.js:229:36)
at BuildAnalyzer. (/usr/local/lib/node_modules/polymer-cli/node_modules/polymer-build/lib/analyzer.js:189:26)
at next (native)
at fulfilled (/usr/local/lib/node_modules/polymer-cli/node_modules/polymer-build/lib/analyzer.js:17:58)
at process._tickCallback (internal/process/next_tick.js:109:7)
References
How to use polymer-redux with polymer-build?
polymer lint and polymer-build fail due to ReduxBehavior not registering properly
#polymerBehavior should still produce a behavior even if we can't evaluate the expression
SystemML is available on https://github.com/SparkTC/systemml
How do I get it started with? I am newbie to GitHub.
I created a directory in my Ubuntu and copied the POM.xml file - when I issued mvn clean package, I am getting the error:
mvn clean package
[INFO] Scanning for projects...
[ERROR] The build could not read 1 project -> [Help 1]
[ERROR]
[ERROR] The project com.ibm.systemml:systemml-parent:5.2-SNAPSHOT (/home/vmuser/system-ml/pom.xml) has 1 error
[ERROR] Child module /home/vmuser/system-ml/system-ml of /home/vmuser/system-ml/pom.xml does not exist
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please read the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/ProjectBuildingException
When I went to R and issued the following command on R 64 bit ver 3.1.1, I got error too:
> install.packages(c("batch", "bitops", "boot", "caTools", "data.table", "doMC", "doSNOW", "ggplot2", "glmnet", "lda", "Matrix", "matrixStats", "moments", "plotrix", "psych", "reshape", "topicmodels", "wordcloud", "methods"), dependencies=TRUE)
--- Please select a CRAN mirror for use in this session ---
Warning: unable to access index for repository https://cran.rstudio.com/bin/windows/contrib/3.1
Warning: package ‘methods’ is in use and will not be installed
Warning message:
packages ‘batch’, ‘bitops’, ‘boot’, ‘caTools’, ‘data.table’, ‘doMC’, ‘doSNOW’, ‘ggplot2’, ‘glmnet’, ‘lda’, ‘Matrix’, ‘matrixStats’, ‘moments’, ‘plotrix’, ‘psych’, ‘reshape’, ‘topicmodels’, ‘wordcloud’ are not available (for R version 3.1.1)
>
The error message you received tells you what the problem is (formatting mine):
The project com.ibm.systemml:systemml-parent:5.2-SNAPSHOT (/home/vmuser/system-ml/pom.xml) has 1 error
Child module /home/vmuser/system-ml/system-ml of /home/vmuser/system-ml/pom.xml does not exist
You said:
I created a directory in my Ubuntu and copied the POM.xml file
You don't just need the pom.xml file; you need the whole project. Either git clone it or download the source as a zip and extract it, then run mvn clean package from the project directory.
git clone is a better option if you intend to modify the source code. It will give you some powerful tools for integrating upstream changes and for submitting your modifications to the parent project. If you just want to use the project as-is, either option should be fine.
SystemML became an Apache (incubating) project in November of 2015. Its main website is located at http://systemml.apache.org/. The project can now be found on GitHub at https://github.com/apache/incubator-systemml.
Probably the quickest way to get started with Apache SystemML is to download a pre-built release package from the Apache SystemML Downloads page (see the main website). Information about Apache SystemML can be found at the Apache SystemML Documentation site, which is linked to from the main site. This includes information about running SystemML in notebooks, on Spark, and on Hadoop.
If you would like to clone the SystemML repository and build it locally with Maven, instructions to do so can be found in the project README on GitHub.
I am trying to setup a Flex/Java multi module project in Eclipse. Using Maven to run the build and generate the war file. The details of the versions I am using are as follows:
Flexmojos : 3.5.0
Flex framework/compiler : 4.5.1.21328
Target player : 10.2.0
And the playerglobal dependency in my pom file uses classifier as 10.2 with version 4.5.1.21328
Now when I run the build using 'mvn install', I get the following error:
[ERROR] Failed to execute goal
org.sonatype.flexmojos:flexmojos-maven-plugin:3.5.0:compile-swf
(default-compile-swf) on project client: TargetPlayer and
playerglobal dependency version doesn't match! Target player: 10.2.0,
player global: 10.2 -> [Help 1]
Any ideas why this might be happening?
I tried just playing around changing those version numbers, but still couldn't make it work for Flex 4.5.1. Please let me know how to go about this (and if you need more information). Thanks.
Regards
Basith
Have you tried simply referencing "10.2" instead of "10.2.0"? I think there was only one Flash player deployed with a 3-segment version number.