Alert-Banner is applied in our clarity UI. It is triggered by error message and Alert-ERROR message type.
<alert-banner [message]="message" [type]="messageType"></alert-banner>
This alert only shows up after UI main page get refreshed.
Not sure if the way we use alert-banner is wrong - some settings that trigger page refreshed is missed in the alert-banner definition.
Or we should apply other alerts mechanism. reading around https://vmware.github.io/clarity/community
could not find an example pass varied "alert text" in.
Clarity doesn't have an <alert-banner> component. Did you check where it was defined?
Related
I created a click event in adobe launch which will capture the value of the link and send it to analytics. I have created a data element for saving the value and in my DOM I am saving value in local storage.
Local storage code:
$('.card').click(function() {
var name = $(this).text();
localStorage.setItem('productName', name);
});
My problem is when I click the first link no value got saved, but after when I click second link it saves the value of first link and on third link saves value of second link and so on. I want to save current link value in evar3 variable.
Data element:
Rule:
Set variables:
Thanks,
Harshit
I'm scratching my head a little bit about why your jQuery selector doesn't match your Rule selector, but that's probably not immediately related or relevant, considering you said you are seeing data pop, in general, so at face value, I'm going to ignore that.
But in general, it sounds like your jQuery code is getting executed after the Rule is evaluated, so it's effectively one step behind. I'm not sure there's much if anything you can do about that if you aim to keep two separate click event listeners like this.
You're going to have to restructure to have one chain off the other (which I don't think is actually feasible with jQuery > Launch as-is. Maybe if you write two separate custom code blocks with promise chaining but that kind of sidesteps Launch and IMO is over-complicating things to begin with (see below)). Better yet, merge them into a single click event listener. On that note..
Why do you have two separate click event listeners? Is the sole reason for this to pass off the link text? Because you can reference the clicked element in the Launch Rule itself.
You should be able to reference %this.innerText% in the Set Variables fields. Or you can reference this object in custom code boxes within the Rule.
IOW at face value I don't see why you need or should be creating/using that jQuery listener or pushing to local storage like that.
Update:
You commented the following:
I tried with %this.innerText% it is also not showing current values. I
am pushing the value first to local storage because my link values are
generating on runtime through an API. They are not hardcoded. I am
also trying to figure out why my rule is getting fired before my
jquery is evaluated. But when I check in console using
_satellite.getVar('Product Name'); it shows me the correct value, but in debugger console value is wrong. Can you show me the way you want
to create rule to getting it fired correctly ? Thanks,
Okay so your link values are generated runtime through an API call? Well okay now that sounds like where the (timing) issue is, and it's the same issue in principle I mentioned you prolly had between the jQuery and Launch code. Assuming you can't change this dynamic link functionality, you have two options:
1. Explicitly trigger a launch rule (direct call rule) in a callback from the API code that's generating the link values.
This is the better method, because you won't have race condition issues with your API vs. link tracking code. The biggest caveat about this method though is that it requires requires you to actively add code to the site, which may or may not be feasible for you.
I have no idea what your code for generating the link looks like, but presumably it's some ajax call and generated from the success callback. So in the callback, you'd add a line of code something like this:
_satellite.track('product_image_click', {
text : elem.innerText
});
Again, I don't know what your API code that generates the link looks like, but presumably you have within it some element object you append to or update the DOM, so for this example, I will refer to that as elem.
'product_image_click' - This is the value you use for the direct call rule identifier in the interface, e.g. :
And then _satellite.track() call also includes an object payload in 2nd argument that you can pass to the direct call rule. So in the code above, I set a property named text and give it a value of elem.innerText.
Then, within the direct call rule, where you set variables, the data you passed can be referenced from event.details object within custom code box (e.g. event.details.text), or using % syntax within the interface fields (e.g. %event.details.text%).
2. Make use of setTimeout to delay evaluating the link click.
The one advantage of this method over option #1 is that it is passive. You don't have to add code directly to your site to make it work.
However, this is the shadier option, because you don't really know how long it will take for your link to be generated. But generally speaking, if you can determine it takes on average say 250ms for the link generation API to do its thing, and you set the timeout to be called at say 300-500ms, then you will probably be okay most of the time. However, it's never a 100% guarantee.
In addition, if clicking on the link ultimately redirects the visitor to another page, then this solution will likely not work for you at all, since the browser will almost certainly have navigated before this has a chance to execute. Because of this, I normally I wouldn't even mention this as an option, but since you mentioned this link involves an API that generates the link values when clicked, I figured maybe this isn't a navigation / redirect link, so maybe this is an option you can go for, if you can't do option #1.
First, create a direct call rule the same as shown in option #1. This will be the rule that receives the link text and makes the Adobe Analytics (or whatever other marketing tag) calls.
Then, create a separate rule as a click event, similar to what you are currently trying to do (listening for the link click, based on your css selector). In this rule, you won't be setting any AA variables. Instead, add a custom js box with code like this:
var elem = this;
(function (elem) {
window.setTimeout(function() {
_satellite.track('product_image_click', {
text : elem.innerText
});
}, 500);
})(elem);
So when the rule is triggered, it will create a setTimeout callback to call the first rule, passing the link text in the payload. And.. hopefully the 500ms timeout shown in the code example is enough time for the API to do its thing. You may be able to adjust it up or down.
Rather than defining it in Data Element I would say its better to keep it directly in the Rule itself. Please try with this %this.#text%.
Let me know if this helped.
So I would like to be able to have a print button for entries in our database so users can print an entry via a print friendly "form".
My thought was to create a separate page, add labels and have those labels pull the relevant information.
I know I can add the open widget information via this code:
app.datasources.ModelName.selectKey(widget.datasource.item._key);
app.showPage(app.pages.TestPrint);
But I'm running into a few problems:
I can't get the page to open in a new window. Is this possible?
window.open(app.pages.TestPrint);
Just gives me a blank page. Does the browser lose the widget source once the new window opens?
I can't get the print option (either onClick or onDataLoad) to print JUST the image (or widget). I run
window.print();
And it includes headers + scroll bars. Do I need to be running a client side script instead?
Any help would be appreciated. Thank you!
To get exactly what you'd want you'd have to do a lot of work.
Here is my suggested, simpler answer:
Don't open up a new tab. If you use showPage like you mention, and provide a "back" button on the page to go back to where you were, you'll get pretty much everything you need. If you don't want the back to show up when you print, then you can setVisibility(false) on the button before you print, then print, then setVisibility(true).
I'll give a quick summary of how you could do this with a new tab, but it's pretty involved so I can't go into details without trying it myself. The basic idea, is you want to open the page with a full URL, just like a user was navigating to it.
You can use #TestPrint to indicate which page you want to load. You also need the URL of your application, which as far as I can remember is only available in a server-side script using the Apps Script method: ScriptApp.getService().getUrl(). On top of this, you'll probably need to pass in the key so that your page knows what data to load.
So given this, you need to assemble a url by calling a server script, then appending the key property to it. In the end you want a url something like:
https://www.script.google.com/yourappaddress#TestPage?key=keyOfYourModel.
Then on TestPage you need to read the key, and load data for that key. (You can read the key using google.script.url).
Alternatively, I think there are some tricks you can play by opening a blank window and then writing directly to its DOM, but I've never tried that, and since Apps Script runs inside an iframe I'm not sure if it's possible. If I get a chance I'll play with it and update this answer, but for your own reference you could look here: create html page and print to new tab in javascript
I'm imagining something like that, except that your page an write it's html content. Something like:
var winPrint = window.open('', '_blank', 'left=0,top=0,width=800,height=600,toolbar=0,scrollbars=0,status=0');
winPrint.document.write(app.pages.TestPage.getElement().innerHTML);
winPrint.document.close();
winPrint.focus();
winPrint.print();
winPrint.close();
Hope one of those three options helps :)
So here is what I ended up doing. It isn't elegant, but it works.
I added a Print Button to a Page Fragment that pops up when a user edits a database entry.
Database Edit Button code:
app.datasources.ModelName.selectKey(widget.datasource.item._key);
app.showDialog(app.pageFragments.FragmentName);
That Print Button goes to a different (full) Page and closes the Fragment.
Print Button Code:
app.datasources.ModelName.selectKey(widget.datasource.item._key);
app.showPage(app.pages.ModelName_Print);
app.closeDialog();
I made sure to make the new Print Page was small enough so that Chrome fits it properly into a 8.5 x 11" page (728x975).
I then created a Panel that fills the page and populated the page with Labels
#datasource.item.FieldName
I then put the following into the onDataLoad for the Panel
window.print();
So now when the user presses the Print Button in the Fragment they are taken to this new page and after the data loads they automatically get a print dialog.
The only downside is that after printing the user has to use a back button I added to return to the database page.
1.
As far as I know, you cannot combine window.open with app.pages.*, because
window.open would require url parameter at least, while app.pages.* is essentially an internal routing mechanism provided by App Maker, and it returns page object back, suitable for for switching between pages, or opening dialogs.
2.
You would probably need to style your page first, so like it includes things you would like to have printed out. To do so please use #media print
ex: We have a button on the page and would like to hide it from print page
#media print {
.app-NewPage-Button1 {
display : none;
}
}
Hope it helps.
1. Here is how it is done, in a pop up window, without messing up the current page (client script):
function print(widget, title){
var content=widget.getElement().innerHTML;
var win = window.open('', 'printWindow', 'height=600,width=800');
win.document.write('<head><title>'+title+'/title></head>');
win.document.write('<body>'+content+'</body>');
win.document.close();
win.focus();
win.print();
win.close();
}
and the onclick handler for the button is:
print(widget.root.descendants.PageFragment1, 'test');
In this example, PageFragment1 is a page fragment on the current page, hidden by adding a style with namehidden with definition .hidden{display:none;} (this is different than visible which in App Maker seems to remove the item from the DOM). Works perfectly...
2. You cannot open pages from the app in another tab. In principle something like this would do it:
var w=window.parent.parent;
w.open(w.location.protocol+'//'+w.location.host+w.location.pathname+'#PrintPage', '_blank');
But since the app is running in frame nested two deep from the launching page, and with a different origin, you will not be able to access the url that you need (the above code results in a cross origin frame access error). So you would have to hard code the URL, which changes at deployment, so it gets ugly very fast. Not that you want to anyway, the load time of an app should discourage you from wanting to do that anyway.
I'm using Bootstrap Select in Meteor (using this package if relevant: https://github.com/amrali/bootstrap-select-meteor), but everytime I switch page and go back (IronRouter) the select has reverted to a standard HTML select.
I initialize it in the rendered callback but it's only called once and breaks when navigating:
Template.temp.rendered = function() {
$('.selectpicker').selectpicker();
};
How can I make sure it's always inited when the template is shown?
I can think of a few hackish ways of solving it but I'm sure there's a better way..
I've seen a similar issue, it makes me think that when you are "changing pages" you are not actually "destroying" the template temp, as the selectpicker() doesn't get called again when you "change back". You don't show enough information to answer this accurately, but you can try
Destroying the selectpicker() during temp.onDestroyed
Initializing selectpicker() in every template you need it for
Is there any code or custom options available to achieve the following :
1> When an error occurs in a text box, the validation shows the error. Forces the user to remove the error and only then proceed to complete remaining text inputs. KEEPS the mouse focus on the Text Box.
I have used built in mx:Validator tags, but it does not coerce the user to remove the error. Instead, user can easily go ahead without rectifying the error.
2> Can the error message which generally appears as a tooltip when mouse focus moves over the text input with the error, REMAIN until the user removes error and not just be displayed on mouse hover action?
You can customize your ToolTips to show your Error. Check this link to customize your tooltip, to show your error in ToolTips
For #2, check out http://aralbalkan.com/1125.
Unfortunately, it is a lot of hassle if you have multiple/large forms. It is unfortunate flex doesn't provide more styling options for the error tooltip.
#1 seems to be a bad UI design. While you may not allow them to submit a form unless they enter valid information, they should be able to navigate around the form freely and fill in the information as they choose. Just my opinion.
A solution to question 1) is as follows;
Use the Validator.validateAll static method to check that all form items are valid before allowing the form to be submitted. The following snippet is taken from a good flex example which shows this
private function resetForm() :void
{
btnLogin.enabled = false;
}
private function validateUs() :void
{
btnLogin.enabled = (Validator.validateAll([val1,val2]).length == 0);
}
The complete example is here
http://idletogether.com/easy-form-validation-and-submit-button-enable-disable-in-flex-3/
Is it possible to get up to date contents from an iframe? Lemme explain the problem I am encountering:
function modify_iframe(url){
my_iframe.src = url;
iframe_content = my_iframe.contentDocument;
//....code to modify the content goes here,,,,
}
The first time I call modify_iframe(url_a) it sets the source as I would expect but the iframe_content is a blank document.
The second time I run modify_iframe(url_b) it sets the source as I would expect but the iframe_content is actually that of url_a.
So it seems that contentDocument is not returning the contents of the new source, but rather the source before it was changed. Anyone know why that is and if there is a way around it?
Additional background info: We have been adding an event listener to fire off on the iframe load event which occurs when the src is changed. This was giving us the contents when calling contentDocument; however, users were being prompted that our site had unauthenticated content even though we use https for everything including the src. After removing the event listener we no longer receive the unauthenticated content warning, but the contentDocument of our iframe is always one step behind as described above.
Um, first try using a setTimeout to wait for the page content to load. But that's not a nice solution. What browser are you testing on? If it were me I would try to get to the bottom of the "unauthenticated content" error prompt.