I am new to Hybris environment. For past two days i have been working on addons concept. i can able to copy my addon files to the target storefront successfully and also compiled with no error. But the issue is my addon is not working(overriding) the functionality of the core code base. The core code is only executing.
I tried to debug, debugger is entering into my corresponding addon controller, then i got the following error message from eclipse. then it jumps into the core code controller and it got executed.
Can someone explain me the complete workflow of the AddOn and also the mistake that i have committed?
Any sort of answer is welcome from the Hybris developers. Thank you in advance.
I think you have committed mistake in < storefrontTemplateName >. The command to install addon is
ant addoninstall -Daddonnames="addon_name" -DaddonStorefront.yacceleratorstorefront="custom_storefront_name"
Do you have done some 'copy and paste action' or did you use the install command from hybris? You have to explicit 'install' the addon. Have a look here how it is working:
https://wiki.hybris.com/display/accdoc50to56/Installing+an+AddOn+for+a+Specific+Storefront
I feel guilty asking a question like this around here, but I'm at a loss and would appreciate some help.
A proof-of-concept like web application was built on one PC and put up on a repo to download on another PC at a different location. There was originally an auto-build feature set up where Azure would build and publish automatically on check-in, but that was removed. Things were working on both ends until one side included a bulk of excluded changes. Now I'm seeing the following error:
The "Microsoft.CodeAnalysis.BuildTasks.Csc" task could not be
loaded from the assembly
...\packages\Microsoft.Net.Compilers.1.0.0\build..\tools\Microsoft.Build.Tasks.CodeAnalysis.dll.
Could not load file or assembly
'file:///...\packages\Microsoft.Net.Compilers.1.0.0\tools\Microsoft.Build.Tasks.CodeAnalysis.dll'
or one of its dependencies. The system cannot find the file specified.
Confirm that the declaration is correct, that the assembly
and all its dependencies are available, and that the task contains a
public class that implements Microsoft.Build.Framework.ITask.
Does anyone have any suggestions on where to begin looking for the issue?
It turns out that NuGet packages were committed to the repository and breaking everything. Deleting the project\project\packages directory from the repo solved all build problems since NuGet fetches the packages automatically on build.
I got this error when I created a new branch for my project.
It drove me crazy for an hour. I tried most of the suggestions over the internet including the accepted answer to this question.
I then closed the project, opened it again, cleaned it and the error is gone. So this means this could be cache issue.
Anyways, just wanted to share.
I too tried the top answer with no luck so deleted the contents of my bin and packages dir, closed and re-opened VS and everything fine now.
I have tried all solutions described before, but none worked.
What solved it for me, was to update the Microsoft.Net.Compilers from the NuGet Package Manager
Right-click on your solution.
Go to Manage Nuget Packages.
Search for Microsoft.Net.Compilers.
Install or update on dependent projects as necessary.
Re-build, clean solution and restart Visual Studio worked for me.
Deleting the package and cleaning the solution solved it for me.
Deleting these three directories solves the problem.
/packages
/bin
/obj
NOTE: delete both /bin and /obj from all projects included in the solution (including Test projects).
Problem hides on TFS, you need to remove folder TestProject...\packages from TFS, check in, delete it from your local dir and build again. Worked!
Use the below step:
1) Delete the package folder.
2) close the visual studio.
3) open the project and rebuild the project.
I delete all from packages folder and rebuild solution. It's worked for me.
In my case: this works for me.
It turns out my teammate had already started looking into Windows 10 development and had Microsoft Build Tools 2015 installed on his machine.
I installed the software from https://www.microsoft.com/en-us/download/details.aspx?id=48159 and the problem was solved.
In my case, the solution was:
Use Windows Explorer and navigate to the offending path:
C:\MyApplication\Code\Main\ABCProject\ABCProject.UI\Bin
Right click on bin folder > select properties > Uncheck ReadOnly.
In my case, the solution was:
Right Click on Solution.
Go to Manage Nuget Packages for this Solution.
Search for Microsoft.CodeDom.Providers.DotNetCompilerPlatform.
Uninstall the searched Package.
Restart the Visual Studio.
I just tried this on a clean install of a Windows 10 machine and the issue for me ended up being that I didn't have the .NET 3.5 framework installed. This stackoverflow question helps explain why.
Cannot build WIX project on windows 10
Right Click on Solution.
Go to Manage Nuget Packages for this Solution.
Search forMicrosoft.Net.Compilers on Browse Section.
Deleting the bin folder worked for me
In vs2017 community there appeared a new item in the "build" menu. It disappeared after I used it and was called something like "Optimise project build packages". I clicked it and it fixed everything, just restart etc. I did it on two machines.
What it did was removed Microsoft.net.compilers 2.10.0 and replaced with Microsoft.CodeDom.Providers.DotNetCompilerPlatform 2.0.1
So there you go - more automagic...
My project was built with .Net Core 2.2 but I had .Net core 3.0 preview installed. I uninstalled .Net Core 3.0 from my system and went through all my class libraries, removing Microsoft.Net.Compilers 3.0, then rebuilt and it worked.
I moved my solution from one drive to another, and one of the files could not be copied because "in used", for which I click ignored, producing the error described in this post. Copying the missing file manually fixed it.
file: Microsoft.Build.Tasks.CodeAnalysis.dll
Destination directory: packages\Microsoft.Net.Compilers.2.1.0\tools
For me I was trying to open a MVC5 project in VS 2013 and I was getting this error, Opened it in VS 2017 and up it worked just fine.
This is kind of a simple question really. I am new to alfresco, so when I read articles like this I realize it is old, but it addresses something similar I need to try. However, I stumble almost right away! It says:
In the 'config/alfresco/site-webscripts' source folder in package 'com.orbitz.components.documentlibrary', add ....
How do I map that to Alfresco 4.2? I have ./tomcat/webapps/share/WEB-INF/classes/site-webscripts, but that is NOT in config/alfresco. Also, all the directories under there are org/alfresco/something.
Is this something anyone can explain or are such articles simple too out of date to be of use?
These articles work with projects with ANT tasks.
If you check the addons google code or github and checkout a project, you'll see a similar config folder or resource folder.
If you execute the deploy tasks (with the right settings) it will deploy it to the right Tomcat folders.
the issue i am fighting through is a bit complicated. Ill explain the setup envoironment to you first.
I am using PHPStorm to work on a Symony2 Project.
My Apache is hosted on a Debian-VM connected to PHPStorm via "Deployment Tool".
/* So far: I can edit code and update the server automaticaly on save. Works*/
My problem now is, that i am using the composer, which is ment do get me the right bundles into the vendor folder.
I WANT to create kind of a symlink from the server directly into the project.
I DONT WANT to download the vendor folder from the server hard into the project.
COMPACT:
I want to create a symbolic link within a PHPStorm project. Linking a folder from a server into the Project. The linked in folder should be unidirectional updated on source change. The Classes and Namespaces should be known to the Project.
Is there any native way to get this done?
Or does anyone know a plugin which could handle such affairs?
I hope i expressed my point clearly :/ Please ask, if anything is unclear.
Greetings and thanks upfront.
It's not possible to do directly from PhpStorm, see the related issue. You can use some third-party tool like ExpanDrive to map a server directory to the drive letter by SFTP and then add this local directory as a content root to your PhpStorm project. Note that it may affect the performance dramatically.
For one of the solutions, I don't see the Clean Solution option neither in the context menu when I right click on the solution name in the Solution Explorer nor in the Build menu. When I make any changes to the project and debug, VS never hits the break point and I get the "The breakpoint will not currently be hit. The source code is different from the original version." message. My understanding is that I need to clean the solution.
For other solutions, I do see the Clean solution and I don't have the same issue.
If you are using website project then their wont be clean solution option,it's available only with web application projects.
Finally had to create a brand new solution and add the projects from the older solution to the newly created one. Not sure what the problem was, but this helped.
I also faced the similar problem recently and this is what I came to.
I guess you are running an older code version than the one you want to debug on. Rebuild the project(s), paying attention to dependencies. Use the "Rebuild" feature.
If it's a Web application project, just clean it yourself by nuking all DLLs in the bin. Then rebuild. I assume it builds without errors?
If you're running a web site, as apposed to a web application project, you probably don't have an actual solution, or even a project file.
For a web site, you need to rebuild the website (from the build menu), or manually delete all of the dlls to accomplish the same thing.
Edit:
How are you debugging? Are you using Cassini (the built in visual studio debugger), or attaching to an IIS process?
I would also try this:
Go to C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files and delete the folder that has the same name as your website.
I had the same problem. Visual Studio was building my old code with debug. I opened a new instance of Visual Studio and opened my solution with it and it now works fine. No idea what happened.
You can also clean using devenv /clean SolnConfigName SolutionName in the command line environment.
Here is the reference: http://msdn.microsoft.com/en-us/vstudio/aa718635.aspx
For a website solution, just clean your web browser history and the Cache there.