I have written spec file just copy some files to some directory on CentOS7.
...(snip)...
%prep
%setup -q
%build
%install
install -m 644 -p $RPM_SOURCE_DIR/some/file \
$RPM_BUILD_ROOT%{_sysconfdir}/file
%clean
rm -rf $RPM_BUILD_ROOT
%files
%doc
%config(noreplace) %{_sysconfdir}/some/file
--------
$ cd rpmbuild
$ rpmbuild SPECS/my.spec
...(snip)...
+ ./configure --build=x86_64 ...
/var/tmp/rpm-tmp.RidAmi: line41: ./configure: No such file or directory
I have not written ./configure ... anywhere.
I don't know why rpmbuild fails.
I found an answer here.
Looks like deleting %build line.
https://www.centos.org/forums/viewtopic.php?t=51254
Related
I am creating a new rpm for a rails app. However the default behavior of the %install section removes the BUILDROOT directory. I assumed that the %install section would install the files from buildroot. I must be doing something wrong because the buildroot is getting removed in the %install section. What is the proper way to do this?
This is the spec file
Summary: Rails APP API (replaces railsapp rpm)
Name: railsapp-api
Version: 6.0.0
Release: 1
License: GPL
URL: http://www.both.org
Group: System
Packager: Tommie Jones
Requires: bash
BuildRoot: ~/rpmbuild/
%description
A rewrite of railsapp from the HTML version to a Http API version
%prep
echo "BUILDROOT = $RPM_BUILD_ROOT"
rm -rf $RPM_BUILD_ROOT
mkdir -p $RPM_BUILD_ROOT/usr/local/veex/railsapp
unzip /home/realworx/rpmbuild/SOURCES/rwx-master.zip -d $RPM_BUILD_ROOT/usr/local/veex/
pushd $RPM_BUILD_ROOT/usr/local/veex/
rm -rf railsapp
mv rwx-master railsapp
pushd $RPM_BUILD_ROOT/usr/local/veex/railsapp
rm Gemfile.lock
bundle install
PWD=`pwd`
cat > gemrc <<EOGEMRC
gemhome: $PWD/vendor/bundle/ruby/1.8
gempath:
- $PWD/vendor/bundle/ruby/1.8
EOGEMRC
gem --config-file ./gemrc install bundler
# Don't need the gemrc any more...
rm ./gemrc
%files
%attr(0744, root, root) /usr/local/veex/railsapp/*
%install
echo %{buildroot}
echo "HELLO"
%clean
echo NOOP
Below is the log where the %install removes the buildroot.
(%install): /bin/sh -e /var/tmp/rpm-tmp.aX3U0b
+ umask 022
+ cd /home/railsapp-api/rpmbuild/BUILD
+ '[' /home/railsapp-api/rpmbuild/BUILDROOT/railsapp-api-6.0.0-1.noarch '!=' / ']'
+ rm -rf /home/railsapp-api/rpmbuild/BUILDROOT/railsapp-api-6.0.0-1.noarch
++ dirname /home/railsapp-api/rpmbuild/BUILDROOT/railsapp-api-6.0.0-1.noarch
+ mkdir -p /home/railsapp-api/rpmbuild/BUILDROOT
+ mkdir /home/railsapp-api/rpmbuild/BUILDROOT/railsapp-api-6.0.0-1.noarch
+ echo /home/railsapp-api/rpmbuild/BUILDROOT/railsapp-api-6.0.0-1.noarch
/home/railsapp-api/rpmbuild/BUILDROOT/railsapp-api-6.0.0-1.noarch
+ echo HELLO
HELLO
+ /usr/lib/rpm/check-buildroot
+ /usr/lib/rpm/redhat/brp-ldconfig
/sbin/ldconfig: Warning: ignoring configuration file that cannot be opened: /etc/ld.so.conf: No such file or directory
+ /usr/lib/rpm/brp-compress
+ /usr/lib/rpm/brp-strip /usr/bin/strip
+ /usr/lib/rpm/brp-strip-comment-note /usr/bin/strip /usr/bin/objdump
+ /usr/lib/rpm/brp-strip-static-archive /usr/bin/strip
+ /usr/lib/rpm/brp-python-bytecompile 1
+ /usr/lib/rpm/brp-python-hardlink
+ PYTHON3=/usr/libexec/platform-python
+ /usr/lib/rpm/redhat/brp-mangle-shebangs
Processing files: railsapp-api-6.0.0-1.noarch
error: File not found: /home/railsapp-api/rpmbuild/BUILDROOT/railsapp-api-6.0.0-1.noarch/usr/local/veex/railsapp/*
How do I keep %install from removing my buildroot?
you are misusing the %prep section. In very short how you should use those sections:
%prep: to extract your sources, apply patches etc.
%build: to compile or build your application (if you need to)
%install: to copy the files into $RPM_BUILD_ROOT
So it is logical that $RPM_BUILD_ROOT is emptied at the start of the %isntall section.
Change your code to extract your zip file in %prep, and use the %install section to put the files inside $RPM_BUILD_ROOT.
I'm trying to build an rpm from source-1.4.3-linux.tgz (that is downloaded so I don't control the name) and the file untars into the directory source-1.4.3-linux. In my source.spec file, I have
Name: source
Version: 1.4.3
So it is probably quite logical that I am getting an error:
cd: source-1.4.3: No such file or directory.
I tried tacking -linux onto the version, but rpmbuild wants only a number there. What do I have to do to tell rpmbuild that the source files are untarred into source-1.4.3-linux?
Just use the setup macro.
setup -n %{name}-%{version}.linux
Here is a simple.spec file that would help you understand the issue. Source tarball contains the following:
$ tar tzf simple-0.tar.gz
simple-0/
simple-0/simple.txt
Spec file:
Summary: Simple SPEC
Name: simple
Version: 0
Release: 1
License: NONE
Group: NONE
URL: NONE
Source0: %{name}-%{version}.tar.gz
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
%description
" This is Simple "
%prep
%setup -q
%build
%install
rm -rf $RPM_BUILD_ROOT
mkdir -p $RPM_BUILD_ROOT/tmp/
install -m 0644 simple.txt %{buildroot}/tmp/simple.txt
%clean
rm -rf $RPM_BUILD_ROOT
%post
echo "In the Post section of Simple"
%files
%defattr(-,root,root,-)
%doc
/tmp/simple.txt
%changelog
* Wed Sep 12 2018 <iamauser#localdomain> -
- Initial build.
ok I got this working. Maybe a hack but it is working. As per the question my tarball is unconventionally named.
$ tar tzf source-1.4.3-linux-amd64.tar.gz
source-1.4.3-linux-amd64/
source-1.4.3-linux-amd64/simple.txt
in the specfile %prep section instead of using %setup or %autosetup, I unpacked manually and renamed the untarred directory.
Name: source
Version: 1.4.3
Release: 0
Source0: https://example.com/%{name}-%{version}-linux-amd64.tar.bz2
%prep
rm -fr %{name}-%{version}
tar -xjf %{SOURCE0}
mv %{name}-%{version}-linux-amd64 %{name}-%{version}
I have a makefile (below) for a project where I've been given a folder of "Raw Data" - a set of files from a colleague, and I've made an R script that does an analysis on some of those files. What I want to do with a the makefile then is assign the directory to a variable RAWDIR, and then use that variable in specifying the make dependencies of the R script, and as a command line argument for the script. Usually in the shell, directories with spaces are expanded when using double quotes and curly braces, but I do not know if this is also correct for make files, as with the following makefile I get the message make: *** No rule to make target""../Raw', needed by pulls'. Stop. So I do not think my file path assigned to RAWDIR is being expanded properly.
Thanks.
RAWDIR="../Raw Data/Fc Project Raw Data"
.PHONY: dirs
pulls: dirs "${RAWDIR}/pm_fc_dnds_cleandata.csv" "${RAWDIR}/fc1_seqs.fasta" "${RAWDIR}/fc2_seqs.fasta" "${RAWDIR}/pm1_seqs.fasta" "${RAWDIR}/pm2_seqs.fasta"
Rscript Allele_Pulling.R "${RAWDIR}/" "${RAWDIR}/pm_fc_dnds_cleandata.csv"
dirs:
mkdir -p -v Pulled_Allelic_Pairs/Unaligned/FC
mkdir -p -v Pulled_Allelic_Pairs/Unaligned/PM
mkdir -p -v Pulled_Allelic_Pairs/Unaligned/Both
mkdir -p -v Pulled_Allelic_Pairs/Unaligned/FC1PM1
mkdir -p -v Pulled_Allelic_Pairs/Unaligned/FC1PM2
mkdir -p -v Pulled_Allelic_Pairs/Unaligned/FC2PM1
mkdir -p -v Pulled_Allelic_Pairs/Unaligned/FC2PM2
mkdir -p -v Pulled_Allelic_Pairs/Aligned/FC
mkdir -p -v Pulled_Allelic_Pairs/Aligned/PM
mkdir -p -v Pulled_Allelic_Pairs/Aligned/Both
mkdir -p -v Pulled_Allelic_Pairs/Aligned/FC1PM1
mkdir -p -v Pulled_Allelic_Pairs/Aligned/FC1PM2
mkdir -p -v Pulled_Allelic_Pairs/Aligned/FC2PM1
mkdir -p -v Pulled_Allelic_Pairs/Aligned/FC2PM2
In general spaces in pathnames are not well supported by make. At least some functions in GNU make could handle spaces that are escaped by \.
The following should work in your use case:
RAWDIR="../Raw\ Data/Fc\ Project\ Raw\ Data"
I'm trying to build a new rpm package for CentOS 6. Using my spec file I'm able to build src.rpm but for some reason I`m not able to create rpm binary file.
This is my spec file:
Name: mc
Version: 4.8.11
Release: 1%{?dist}
Summary: Midnight Commander
Group: System Environment/Base
License: GPLv2
URL: http://ftp.midnight-commander.org/mc-4.8.11.tar.bz2
Source0: mc-4.8.11.tar.bz2
Buildroot: <dir>
BuildRequires: glibc-utils
Requires: sland
%description
This is simply file manager for linux.
%prep
%setup -q
%build
%configure
make %{?_smp_mflags}
%check
make check
%install
rm -rf $RPM_BUILD_ROOT
make install DESTDIR=$RPM_BUILD_ROOT
install -m 755 -d $RPM_BUILD_ROOT/%{_sbindir}
ln -s /home/rpmbuilder/bin/mckonrad $RPM_BUILD_ROOT/%{_sbindir}
%clean
rm -rf $RPM_BUILD_ROOT
%files
%defattr(-,root,root,-)
%doc
%changelog
rpmlint command showing this:
[rpmbuilder#localhost SPECS]$ rpmlint mc.spec
mc.spec: W: invalid-url Source0: mc-4.8.11.tar.bz2
0 packages and 1 specfiles checked; 0 errors, 1 warnings.
[rpmbuilder#localhost SPECS]$
I executed command:
rpmbuild -bb mc.spec
and I cannot find *.rpm file in RPMS folder.
I suspect that something is wrong with my mc.spec file.
Would be perfect is somebody could help me.
You have no entries in the %files section of your spec file.
Try adding an entry in %files and then rebuilding.
I'm trying to build my first RPM, but getting an error. My .rpmmarcos files looks like this:
%packager Your Name
%_topdir /home/snort/test
%_tmppath /home/snort/test/tmp
%_smp_mflags -j3
%__arch_install_post /usr/lib/rpm/check-rpaths /usr/lib/rpm/check-buildroot
When I run: "rpmbuild -v -bb SPECS/test.spec" I receive this error:
+ STATUS=0
+ '[' 0 -ne 0 ']'
+ cd test-1
/home/snort/test/tmp/rpm-tmp.55712: line 36: cd: test-1: No such file or directory
error: Bad exit status from /home/snort/test/tmp/rpm-tmp.55712 (%prep)
File rpm-tmp.55712 ends with this:
cd '/home/snort/test/BUILD'
rm -rf 'test-1'
/bin/gzip -dc '/home/snort/test/SOURCES/test-1.c55.tar.gz' | tar -xvvf -
STATUS=$?
if [ $STATUS -ne 0 ]; then
exit $STATUS
fi
cd 'test-1'
I'm guessing rpmbuild does the "rm -rf 'test-1'" to remove any old/un-needed directories, then it untar's the test-1.c55.tar.gz file, then tries to "cd test-1" but the untar command doesn't make the directory so the scripts errors out. I'm not sure what to do now.
My spec file: more SPECS/test.spec
Name: test
Version: 1
Release: .c55
Summary: Just a Test
Group: MyJunk
License: GPL
URL: http://www.somesite.com
Source0: test-1.c55.tar.gz
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
%description
This is just a test
<br>
%prep
%setup BUILD
%build<br>
%configure<br>
make %{?_smp_mflags}<br>
%install<br>
rm -rf $RPM_BUILD_ROOT<br>
make install DESTDIR=$RPM_BUILD_ROOT
<br>
%clean<br>
rm -rf $RPM_BUILD_ROOT<br>
%files
%defattr(-,root,root,-)
%doc
%changelog
Any ideas?
Thanks for the Help
Gary
RPM (or, to be exact, %setup macro) expects your source tarbal test-1.c55.... to contain the directory test-1.
If the directory there is different, you can fix that by using
%setup -n yourdir
See http://www.rpm.org/max-rpm/s1-rpm-inside-macros.html for more details.