I am trying to run my Automated test cases deployed on a virtual machine and trying to trigger it with the help of Octopus Deployment tool. I installed test agent and Octopus Tentacle on my machine. Octopus is triggering the DLL's for Automated test cases very well.But while Octopus trying to run the test cases it's giving me an Error as below:-
Microsoft.VisualStudio.TestTools.UITest.Extension.UITestException: To run tests that interact with the desktop, you must set up the test agent to run as an interactive process. For more information, see "How to: Set Up Your Test Agent to Run Tests That Interact with the Desktop" (http://go.microsoft.com/fwlink/?LinkId=255012)
Error 01:59:38
If you are running the tests as part of your team build, you must also set up the build agent to run as an interactive process. For more information, see "How to: Configure and Run Scheduled Tests After Building Your Application" (http://go.microsoft.com/fwlink/?LinkId=254735)
I setup my password in test agent and set it as intractive process but still i am facing the same issue.
I am triggering my DLL's as below through Octopus.
& "C:\Program Files (x86)\Microsoft Visual Studio 12.0\Common7\IDE\CommonExtensions\Microsoft\TestWindow\vstest.console.exe" "C:\MyWebaPP\Automated_test\Automated_test.dll"
I tried each and every way i found.Please help me out in this.
Thanks in advance!!
We recently encountered the same problem.
During our research, we found this post on the Octopus support forum:
http://help.octopusdeploy.com/discussions/questions/5080-tentacle-running-interactive-tests
We also contacted Octopus Deploy by mail, and they essentially gave us the same response.
While we had no luck with the "scheduled task for test run" approach, we eventually managed to get it working by running the Octopus Tentacle as a process rather than a service.
The challenge here was making sure the Tentacle would start when our test machine started. We wanted this to happen automatically, so RDPing in and starting the process every time was out of the question (this also caused some additional problems for the UI test run...).
The final working solution was to schedule a task that would start the Octopus Tentacle as an interactive process whenever the machine booted (i.e. run Tentacle.exe directly), and then make sure we never RDP to this machine. Make sure the task has sufficient privileges, and that it "Runs whether the user is logged in or not". Also, remember to disable automatic startup of the Octopus Tentacle Service.
Edit: We had some trouble making this solution work across all our environments. It seems that for security reasons, newer versions of Windows are quite skeptical about allowing scheduled tasks to start interactive processes when there is no user logged on.
We did another search for possible solutions, and came across FireDaemon Pro (commercial software), which allows us to register interactive Windows services that run under a domain user. Not quite sure how it works, but they seem to be able to run a UI from a Windows service in session0 (the UI is also isolated). The Octopus Tentacle starts without complain, and the UI tests run the way we want them to.
We have a project where the developers (from what I understand) use gulp to run a website locally using Vagrant. They want to deploy this website on an AWS instance.
We are trying to implement the commands using Jenkins. The website stays up while gulp serve-dev is running, but then Jenkins times out and Nginx returns a 502 error. Of course we can prevent Jenkins from timing out but then the job would need to keep running.
Is there away to run this command as a service? any other way we can go about this ?
You want to run gulp in the backgroud without stoppping when you close terminal or log out from the server.
Try using nohup(short for no hangup) which runs command with hangup ignored so that your command continue running even if you logout from the server
try running it using nohup gulp serve-dev &
& put command in background mode so that you can continue using the current shell screen.
Cheers!
Does anyone know a good method to debug server side code?
I tried enable Node.js debug then use node-inspector but it does not show any of my code.
I end up using console.log but this is very inefficient.
Update: I found the following procedure works on my Linux machine:
When you run Meteor, it will spawn two processes
process1: /usr/lib/meteor/bin/node /usr/lib/meteor/app/meteor/meteor.js
process2: /usr/lib/meteor/bin/node /home/paul/codes/bbtest_code/bbtest02/.meteor/local/build/main.js --keepalive
You need to send kill -s USR1 on process2
Run node-inspector and you can see your server code
On my first try, I modify the last line on meteor startup script in /usr/lib/meteor/bin/meteor to
exec "$DEV_BUNDLE/bin/node" $NODE_DEBUG "$METEOR" "$#"
and run NODE_DEBUG=--debug meteor on command prompt. This only put --debug flag on process1 so I only see meteor files on node-inspector and could not find my code.
Can someone check this on Windows and Mac machine?
In Meteor 0.5.4 this has become a lot easier:
First run the following commands from the terminal:
npm install -g node-inspector
node-inspector &
export NODE_OPTIONS='--debug-brk'
meteor
And then open http://localhost:8080 in your browser to view the node-inspector console.
Update
Since Meteor 1.0 you can just type
meteor debug
which is essentially a shortcut for the above commands, and then launch node inspector in your browser as mentioned.
Update
In Meteor 1.0.2 a console or shell has been added. It may come in handy to output variables and run commands on the server:
meteor shell
Meteor apps are Node.js apps. When running a Meteor app with the meteor [run] command, you can configure the NODE_OPTIONS environment variable to start node in debug mode.
Examples of NODE_OPTIONS environment variable values:
--debug
--debug=47977 - specify a port
--debug-brk - break on the first statement
--debug-brk=5858 - specify a port and break on the first statement
If you export NODE_OPTIONS=--debug, all meteor command run from the same shell will inherit the environment variable. Alternatively, you can enable debugging just for one run, with NODE_OPTIONS="--debug=47977" meteor.
To debug, run node-inspector in a different shell, then go to http://localhost:8080/debug?port=<the port you specified in NODE_OPTIONS>, regardless of what node-inspector tells you to run.
To start node.js in debug mode, I did it this way:
open /usr/lib/meteor/app/meteor/run.js
before
nodeOptions.push(path.join(options.bundlePath, 'main.js'));
add
nodeOptions.push('--debug');
Here are additional practical steps for your to attach debugger eclipse:
use '--debug-brk' instead of '--debug' here, because it's easier for me to attach node.js using eclipse as debugger.
add 'debugger;' in the code where you want to debug.(I prefer this way personally)
run meteor in console
attach to node.js in eclipse(V8 tools, attach to localhost:5858)
run, wait for debugger to be hit
when you start meteor in your meteor app folder, you'll see that "debugger listening on port 5858" in console.
On Meteor 1.0.3.1 (update to Sergey.Simonchik answer)
Start your server with meteor run --debug-port=<port-number>
Point browser to http://localhost:6222/debug?port=<port-number>
Where <port-number> is a port you specify.
In your code add a debugger; where you want to set your break point.
Depending on where debugger; is invoked, it will either break on your client or server browser window with inspector opened.
I like to set breakpoints via a GUI. This way I don't have to remember to remove any debugging code from my app.
This is how I managed to do it server side for my local meteor app:
meteor debug
start your app this way.
Open Chrome to the address it gives you. You MAY need to install https://github.com/node-inspector/node-inspector (it might come bundled with Meteor now? not sure)
You'll see some weird internal meteor code (not the app code you wrote). Press play to run the code. This code simply starts up your server to listen for connections.
Only after you press play you'll see a new directory in your debugger folder structure called "app". In there are your meteor project files. Set a breakpoint in there one the line you want.
Open the local address of your app. This will run your server side code and you you should be able to hit your breakpoint!
Note: you have to reopen the inspector and go through this process again each time your app restarts!
As of Meteor 1.0.2 probably the best way for server-side debugging is directly via the new built-in shell: with running server run meteor shell. More info here: https://www.meteor.com/blog/2014/12/19/meteor-102-meteor-shell
I am not sure why it was not working for you.
I am able to use it by following steps on console (Mac).
$ ps
$ kill -s USR1 *meteor_node_process_id*
$ node-inspector &
Above steps are mentioned on https://github.com/dannycoates/node-inspector. It is for attaching node-inspector to running node process.
I wrote a small meteor package called meteor-inspector which simplifies the use of node-inspector to debug meteor apps. It internally manages the lifecycle of node-inspector and hence, the user does not need to restart the debugger manually after some files have changed.
For more details and concrete usage instructions take a look at https://github.com/broth-eu/meteor-inspector.
for meteor 1.3.5.2, run
meteor debug --debug-port 5858+n
n is a non-zero number, this will cause node-inspector use 8080+n as web port.
WebStorm, the powerful IDE free for open source developers, makes it much easier to debug server-side.
I've tested it on Windows, and the configuration was painless - see my answer.
A inspector that solve my issues is meteor server console. Here is the process I followed to install it:
In your project folder, add the smart package server-eval:
mrt add server-eval
For Meteor 1.0:
meteor add gandev:server-eval
Restart meteor.
Download crx Chrome extension file from here.
Open extensions page in Chrome and drag crx file to extensions page.
Restart Chrome.
Check the web inspector out to eval server side code:
In comparison with node-inspector, I have a clearer output.
If you prefer to use nodeJS' official debugger you can call NODE_OPTIONS='--debug' meteor and then (on a different shell) node debug localhost:5858.
I added an XPC Service to my project and I would like to set breakpoints and inspect variable contents in the debug area in XCode. Breakpoints that I set in the service's code are not recognized (obviously, the debugger is attached to the main apps process. How and I attach the debugger (manually or automatically) to the XPC Service process after my main app launches it? Is there some way to run the service alone and send it messages without it being launched from the main app?
Debug -> Attach To Process -> By Process Identifier (PID) or Name...
Type in your XPC service process name. The next time launchd starts up your XPC service, Xcode will attach.
I am actually not sure how to attach the debugger. But you can still use "NSLog" for debug output on the console. Then start the "Console.app" in "/Applications/Utilities/Concole.app". Depending on your system language this app may have a different name (it's localized). It shows ALL NSLog outputs from all Applications which are running including your xpc-services.
It's not the debugger, but you will get informations out of your service.
I am running/debugging an asp.net mvc3 application from within Visual Studio 2010.
Anything static in nature is not called when I re-run the app from within Visual Studio.
(or even something simple like Application_Start())
Each time I want to run the webapp 'properly' I need to kill WebDev.WebServer40.EXE in the task manager before anything static is called again.
q1) Is this normal, and if Yes, why?
q2) If no, then I would expect the ASP.NET Development Server to be restarted each time I restart a debugging session. How can I turn this on?
UPDATE:
Recompiling sometimes causes Application_Start to be called, not always.
I've resorted to calling a batch file in the prebuild, eg
kill_WebServer40.bat
which contains
taskkill /F /IM WebDev.WebServer40.EXE
exit 0
If you embed those two commands directly into the pre-build textarea your compilation will fail if the WebServer isnt running already. This linked helped fix that.
Surprised this wasn't discussed more/previously - when developing an app, as if you have any static data/caches and you want to run the application 'clean' you would run into this issue.
Yes it's normal. It will restart if you touch the web.config or recompile. The development server continues to run the application in the background after you stop debugging.
You can stop the development server in the task tray by right clicking on the icon and choosing stop.
There isn't a way to force a application restart every time you hit debug. This would only be needed for the edge case where you are debugging application start up. Just hit rebuild before debugging and it will have the desired affect.