I already have an website on godaddy, So can I connect SQL Server database (Database is in my home PC) from website which is already launched in godaddy. I did my website using Asp.net.
If can, what are all the things I should give importance?
Note:
My database is not huge.
Please help me.
Technically speaking yes you can, should you..unless your home computer is a server, no. You would have to ensure that you have a static IP address and allow 1433 through your firewall. honestly its not that costly to get a cloud sqlserver and hook to that, discountasp.net has really good service.
Technically you can do it. I assume you want to know how to connect to it.
Set a static IP for you computer ex: 192.168.1.105 (make sure you are on the same subnet as your default gateway.
Open the firewall for your sql server.
Go into router settings and do port forwarding to the static IP (from step 1) and the port of your SQL server ex: 1433
Connect your website to the database using public IP (google what is my ip)
example: 123.123.123.12:1433
This should work.
Related
There have been many articles on various forums on how to setup mcrosoft active directory domain services. I am a bit new to the field, so please bear with my ignorance. I have a very basic query whose answer i am not able to find. I have an office of 20 people where i would like to deploy AD Domain services to have a better control. i want to know how should i set my network PHYSICALLY. I have a router supplied by my internet provider. Where exactly should i put my server? Can i plug my server anyhere in the network and connect the users through domain, or the main internet wire should plug into the server first and the users in turn be connected to the server. enter image description here I hope i am clear. Should internet ‘flow’ from the server which has AD to users, or i can put the serverver anywhere in the topology.
In a small size network like yours, 1 server should be enough. It should be somewhere behind the router. Plugging it into the switch is fine as it will have a internal address.
You will need DNS on your server which will install when you promote to a DC. All of your computers need to look at your server for DNS. Your Server's DNS should have a forwarder to your ISP DNS or to a public DNS. It doesn't matter if you server or your router does DHCP so long as it gives out the server Internal IP for DNS.
What would I do:
I would plug your ISP into the Router, Your Router into your Switch, and all computers + server into the Switch.
You can place your server anywhere in the topology. It is not necessary for all user traffic to the internet to be routed through the server.
With small-scale deployments (less than 25 Users) I typically just put the server on the same switch and subnet as the users.
I would like to create a local wireless without internet.
I would like to have the possibility to connect 50 clients and access to a website using a domain name.
That means, I need a DNS and DHCP.
I sreach on internet an I found a way to achieve that but not totally and i am not sure if it will work and if it is the best way to achieve that.
I can maybe have a mini PC (server) with ad hoc network and have the client to connect on the server but:
Will it be possible on a connection to assign a ip to the client and set a DNS server ip on the client as the same ip of the server.
I found mini PCs but how can I know if the PC will handle a lot of client ? Which network card to choose ?
I think also that a router and configure DHCP on it to distribute the IPs but I would like to have one box ready object as a mini PC.
I need an advice on the best way to go with what i want to achieve and materials i need to buy and good references.
For a linux domain controler you will need to install bind to host your own DNS. It's a little involved to set up, but necessary if your network doesn't have a DNS server. If you're using a windows domain controller you will need a server OS (expensive). If you only have 50 clients the DNS resources needed will be small and you could run bind from any old box, even a Raspberry Pi. You will also need a host machine for the "website" a.k.a. an intranet. This can be the same machine as your DNS server, but can be any computer on the network. When all is done you will have your router configured with the IP of your local DNS server. The DNS server will point your local domain to whatever box hosts the intranet website.
I have windows 8 host and i have installed ubuntu 14.10 server as a virtual machine in vmware. i have installed LAMP server and i am trying to host a website from it. i have created a virtual host. my website is accessible in the host machine when i go to the address 192.168.0.106.
my router info:
LAN
IP Address :192.168.0.1
INTERNET
IP Address :10.30.XXX.XXX
"what is my ip" in google: 113.XXX.XXX.XXX
how do i make my website accessible from the internet ? I know it is a dumb question, but i tried searching everywhere and could not get the solution.
Since you say that you can connect to the site from the host machine, it does not matter that it is in a VM.
You say that you can connect to your site via: 192.168.0.106 on the LAN. You need to forward connections to your WAN address (113.193.56.198) to your LAN address (192.168.0.106). You can do this in most router settings in a section called Port forwarding. Use port 80 if you're hitting the LAN IP from a browser and you don't have to add a port after the address like http:\\192.168.0.106:1234. Otherwise, use whatever port you like.
Once you get that working, it is a good idea to use a dynamic DNS service, which will connect your IP to a domain name and update the connection whenever your WAN IP changes. This way, instead of using the WAN IP in a browser, you can use your domain name and it should always work. But that's not your first problem. First get it working with the WAN IP by itself. Once you've got that working, get some DynDNS.
EDIT
If you think it should be working but can't figure out why it isn't, use a tool like nmap/zenmap to scan your WAN and LAN IPs. That will help you diagnose the problem.
A DynDNS should do the job!
It will automatically renew your dynamic ip address. All you need is; a tool that runs on your server with website.
Search for it on google, and you'll find a solution. Btw: there are, Free and paid solutions.
EDIT: by the way, your router requires additionally some port forwarding to make your website accessible from outside. Even with the DynDNS stuff installed.
Just to give you some indications.
I am running a website on localhost:portnumber on visual studio 2005, and want to allow another person to connect to it from another PC. Is this possible?
You can try following this article and see if it works
http://www.pluralsight-training.net/community/blogs/jimw/archive/2009/09/03/accessing-the-visual-studio-asp-net-development-server-from-iphone.aspx
Possible, yes.
You will need an ip address that is accessible from that other machine.
Your firewall will need to allow the appropriate port to be open (typically 80).
If you want them to use a DNS name, that DNS name must be pointed to your IP. And, again, it must be externally accessible.
Now, if the client is NOT on your local network, then the IP will have to be a public one that is routed to your machine. Depending on where you are (corporate, etc) there may be other firewalls in place to prevent this. In this case contact your local network admin.
Yes its possible for only for testing purposes first you need to install IIS and get dynamic DNS to allow user to connect to your computer (Using your Dynamic IP) Check No-IP , dyndns point this dynamic host to your IIS website, Bindings settings
Yes, it is possible. You need to do two things:
1) Open that "portnumber" for incoming connections through your windows firewall (and any other firewall you may be running).
2) Set up your router to allow incoming connections on that "portnumber" and route those connections to your local computer's IP Address.
That should do it. Be aware that doing this opens up your computer to be hacked if you are not careful.
I published a web application to one of app servers. Now, if I am connected within my company network (no login require), I can access the web site no problem. Now, if I am connected from outside of the network over VPN, I can't access the website (Getting page not found appears). Do I need to configure IIS on the app server for allowing the connection over VPN?
Thanks for your time.
It sounds like you do not have your firewall/router configured correctly to allow traffic from external sources. When your connected via VPN it is like you are connected to the internal network. Without the VPN you need to make sure it is routed correctly and visible through your firewall. Can you ping the IP that you are trying to get to?
Do you get DNS resolution when you connect over the VPN? If you are trying to hit an internal machine name address, you might try changing to the IP address of the machine.