I am trying to make web app accessible by http://LocalComputer/WebsiteName on IIS.
I am able to access it by http://computername:portnumber/
So what does my binding need to be and do I need a static ip?
Any help or redirection to appropriate resources will be greatly appreciated!
Is IIS setup on default port 80? If your document root is setup to website, you should be able to access it via http://computername/. If this is a local setup, and assuming your DNS is setup and working on the router, wont need a static IP although doubtful IP will ever change.
http://LocalComputer/WebsiteName this can be done locally without a static IP.
In order to make it publically over http you would need below things.
1) Registered domain name
2) Registered name servers
3) DNS zone created for the domain either with registrar or on the server
You can either host this website by renting a Windows VPS or a server and with the help of third party control panels like Plesk or Hosting controller.
OR
You can purchase a shared web hosting space from a windows hosting provider and upload your pages to make the contents accessible publically.
Another option would be to set multiple domains in your hosts file
domain1 192.168.0.10
domain2 192.168.0.10
...
Set IIS to bind and hosts multiple domain on the same IP. Then you can access each site locally by going to http://domain1 or http://domain2 etc...
Related
I am trying to set up a secondary web site hosted on our local domain controller running IIS-8.
I already have one site working successfully thought our network, the default site.
I have successfully got the second one to work on the localhost (the domain controller Server 2012-R2), but I can't seem to access it from any of the other workstations on our network.
I added the new site.
Set the binding to IP address:192.168.1.1, Port:80, Host Name:dyo.mysite.com
I have modifed C:\Windows\system32\drivers\etc\hosts to show 192.168.1.1 dyo.mysite.com, and I have added an alias to the forward lookup Zone in the DNS Manager. (Name:byo.mysite.com, FQND:byo.mysite.com.mydc.com, Target Host: 192.168.1.1)
I can't seem to access the site from any of the network work stations. I have tried many combinations of addresses, http://byo.mysite.com, 192.168.1.1/byo.mysite.com, \mydc\byo.mysite.com, etc.
I would imagine that I am probably missing something simple. I just don't know it is.
Any insight would be greatly appreciated.
To get your server accessed from other workstation. You have to promise
Your IIS site can be accessed via IP address directly.
the client workstation is using your DNS
Your client workstation is not bypassing your DNS server by .pac proxy
So could you get access the website via IP address by disabling default website and set the site to unassigned IP or 192.168.1.1 with null domain name?
If you want to access the website via byo.mysite.com. Then you shouldn't set FQDN like byo.mysite.com.mydc.com. because Web browser will never consider byo.mysite.com as an alias but a different server. That's why When you set FQDN like byo.myDC.com, you could get work by access http://dyo and you could also access website via byo.mysite.com.mydc.com but fail with byo.mysite.com.
How to set DNS correctly
To get it work, please create an new primary Forward Loopup Zone named mysite.com. Then create a new HOST(A) record to map to your machine name like dc.mysite.com and 192.168.1.1. Then create an Alias(CNAME) called www to map to this A NAME. Then the FQDN will be www.mysite.com.
Finally bind your IIS site and access the website should work.
PS: Please make sure your other workstation is not using a proxy.
Assuming a Windows Server 2012 VPS:
It seems that many tutorials include the setting up of DNS Server (setup of forward lookup zones, and A record) as part of the basic steps to deploy and run an ASP.NET web application on IIS.
I'm slightly confused, because within IIS manager you can set the bindings ( IP address, URL, SSL, port) of a web application. Wouldn't this alone not suffice to correctly route incoming requests to the correct web application?
What would be the advantage to running DNS Server?
IIS Manager can only manage IIS related Windows settings, but to make a site work you need much more settings than that.
DNS settings are critical to direct web browsers to your side. Nobody uses IP addresses to access a site, so a typical URL uses domain name. That requires DNS to translate the domain name to an IP address so that browsers can send HTTP packets to the proper location.
IIS Manager could not manage that for you, as which DNS product to use or how to configure it is usually vendor specific and out of IIS's scope.
I have a server that running IIS7 and DNS server.
I have 2 domains:
www.mydomain1.com
www.mydomain2.com
I want to visitors from internet coming without port of this sites. What may i do for this?
If I understand your question correctly, you need to set up two separate websites within IIS, and configure the bindings on each site - select the Bindings option and specify the correct hostname, for each site.
Note - this will only work for HTTP sites; if you want to route HTTPS to each site, they'll each need a unique IP address as you cannot setup hostname bindings for secure sites.
I have 2 web apps installed on my IIS, one running as app1.mydomain and other one as app2.mydomain
In the test environment I just copied about two entries pointed to 127.0.0.1
What changes do I have to do in order to put this on production server, I mean on DNS level?
Can I use URL re-write on IIS to avoid changes for DNS?
Thanks
You need to add A or CNAME records mapping both subdomains to the external IP address of your server.
This tells web browsers to go to your server when you go to the subdomain; URL rewriting has nothing to do with this.
This is driving me nuts. I am trying to setup a webiste on our dev server with a specific url name www.mystpidsite.com as an example. mystupidsite is not the same name as the dev server.
1) specify a specific url to use for the website I create in IIS
2) run it and use that url to access it
I have:
1) created a new site in IIS 7 in Server 2008
2) attempted to access it via the site name which I set to the desired url and port 8888. So if we want it to be www.mystupidsite.com I setup the website name to mystupidsite in IIS 7.
3) I even tried to create an application under mystupidsite with the same name in IIS 7.
The server is definitely accessible and pingable on the network from my local PC, we have other stuff installed on this new server. Do I need to create an application or is just creating the website enough in IIS 7? I specified the IP as the server's IP in the website I made.
For the host name in the bindings of the site I put www.mystupidsite.com
when I try to access the site via www.mystupidsite.com it can't find it and the site in IIS7 on the dev server is running. It's running on a HyperV instance which is our dev server. Everything else has worked just fine. I just wnat to understand how to get a specific url by name setup.
Do I need to add something in the hosts file on the server or something?
You're not going to be able to have a site on your dev box answer to both the mystpidsite.com and mystupidsite.com domain names.
Unless you have the domains registered and have your domain's nameserver directing that name to your dev machine, IIS is only going to answer to requests either the machine name on the network or the IP address of your machine (in addition to 127.0.0.1 and localhost).
The only thing you're going to be able to do outside that scenario is set up two sites on two different ports on your machine and access them from http://localhost:80 and http://localhost:8888 (or network computer name equivalent).
you need to have an entry in dns to be able to hit the server when using www.mystupidsite.com
Because you have the site running on an alternate port you should be able to get to it by http://your-server-IP-address:8888
If you want to test it locally using the host name and do not have access to dns you can add the appropriate entries to the hosts file on your local machine (c:\windows\system 32\drivers\etc\hosts)
What happens when you type 'nslookup www.mystupidsite.com'? Do you get the IP address of the virtual server?
Do you have the windows firewall enabled on the server? if so, did you add an exception for port 8888?
add a default binding (no host header / blank) and try accessing it by IP