I looked around both here and elsewhere, I found many similar questions but none which exactly answer mine. I need to clean up naming conventions, specifically replace/remove certain words and phrases from a specific column/variable, not the entire dataset. I am migrating from SPSS to R, I have an example of the code to do this in SPSS below, but I am not sure how to do it in R.
EG:
"Acadia Parish" --> "Acadia" (removes Parish and space before Parish)
"Fifth District" --> "Fifth" (removes District and space before District)
SPSS syntax:
COMPUTE county=REPLACE(county,' Parish','').
There are only a few instances of this issue in the column with 32,000 cases, and what needs replacing/removing varies and the cases can repeat (there are dozens of instances of a phrase containing 'Parish'), meaning it's much faster to code what needs to be removed/replaced, it's not as simple or clean as a regular expression to remove all spaces, all characters after a specific word or character, all special characters, etc. And it must include leading spaces.
I have looked at the replace() gsub() and other similar commands in R, but they all involve creating vectors, or it seems like they do. What I'd like is syntax that looks for characters I specify, which can include leading or trailing spaces, and replaces them with something I specify, which can include nothing at all, and if it does not find the specific characters, the case is unchanged.
Yes, I will end up repeating the same syntax many times, it's probably easier to create a vector but if possible I'd like to get the syntax I described, as there are other similar operations I need to do as well.
Thank you for looking.
> x <- c("Acadia Parish", "Fifth District")
> x2 <- gsub("^(\\w*).*$", "\\1", x)
> x2
[1] "Acadia" "Fifth"
Legend:
^ Start of pattern.
() Group (or token).
\w* One or more occurrences of word character more than 1 times.
.* one or more occurrences of any character except new line \n.
$ end of pattern.
\1 Returns group from regexp
Maybe I'm missing something but I don't see why you can't simply use conditionals in your regex expression, then trim out the annoying white space.
string <- c("Arcadia Parish", "Fifth District")
bad_words <- c("Parish", "District") # Write all the words you want removed here!
bad_regex <- paste(bad_words, collapse = "|")
trimws( sub(bad_regex, "", string) )
# [1] "Arcadia" "Fifth"
dataframename$varname <- gsub(" Parish","", dataframename$varname)
Related
I am trying to remove the decimal points in decimal numbers in R. Please note I want to keep the full stop of strings.
Example:
data= c("It's 6.00pm, and is late.")
I know that I have to use regex for this, but I am struggling. My desired output is:
"It's 6 00pm, and is late."
Thank you in advance.
Try this:
sub("(?<=\\d)\\.(?=\\d)", " ", data, perl = TRUE)
This solution uses lookbehind (?<=...) and lookahead (?=...)to assert that the period you wish to remove be enclosed by digits (thus avoiding matching the period at the sentence end). If you have several such cases within strings, then use gsubinstead of sub.
I suggest using a simple pattern to find the target text, then adding parenthesis to identify the parts of the matching text that you want to retain.
# Test data
data <- c("It's 6.00pm, and is late.")
The target pattern is a literal dot with a string of digits before and after it. \\d+ matches one or more digits and \\. matches a literal dot. Testing the pattern to see if it works:
grepl("\\d+\\.\\d+", data)
Result
TRUE
If we wanted too eliminate the whole thing we could do a simple replacement with an empty string. Testing if this targets the correct text:
sub("\\d+\\.\\d+", "", data)
Result
"It's pm, and is late."
Instead, to discard only a section of matched text we can identify the parts we want to keep, which is done by surrounding them with parenthesis. Once done we can refer to the captured text in the replacement. \\1 refers to the first chunk of text captured and \\2 refers to the second chunk of text, corresponding to the first and second sets of parenthesis
# pattern replacement
sub("(\\d+)\\.(\\d+)", "\\1\\2", data)
Result
[1] "It's 600pm, and is late."
This effectively removes the dot by omitting it from the replacement text.
I'm working with the following code:
Y_Columns <- c("Y.1.1")
paste('{"ImportId":"', Y_Columns, '"}', sep = "")
The paste function produces the following output:
"{\"ImportId\":\"Y.1.1\"}"
How do I get the paste function to omit the \? Such that, the output is:
"{"ImportId":"Y.1.1"}"
Thank you for your help.
Note: I did do a search on SO to see if there were any Q's that asked "what is an escape character in R". But I didn't review all the 160 answers, only the first 20.
This is one way of demonstrating what I wrote in my comment:
out <- paste('{"ImportId":"', Y_Columns, '"}', sep = "")
out
#[1] "{\"ImportId\":\"Y.1.1\"}"
?print
print(out,quote=FALSE)
#[1] {"ImportId":"Y.1.1"}
Both R and regex patterns use escape characters to allow special characters to be displayed in print output or input. (And sometimes regex patterns need to have doubled escapes.) R has a few characters that need to be "escaped" in certain situation. You illustrated one such situation: including double-quote character inside a result that will be printed with surrounding double-quotes. If you were intending to include any single quotes inside a character value that was delimited by single quotes at the time of creation, they would have needed to be escaped as well.
out2 <- '\'quoted\''
nchar(out2)
#[1] 8 ... note that neither the surround single-quotes nor the backslashes get counted
> out2
[1] "'quoted'" ... and the default output quote-char is a double-quote.
Here's a good Q&A to review:How to replace '+' using gsub() function in R
It has two answers, both useful: one shows how to double escape a special character and the other shows how to use teh fixed argument to get around that requirement.
And another potentially useful Q&A on the topic of handling Windows paths:
File path issues in R using Windows ("Hex digits in character string" error)
And some further useful reading suggestions: Look at the series of help pages that start with capital letters. (Since I can never remember which one has which nugget of essential information, I tried ?Syntax first and it has a "See Also" list of essential reading: Arithmetic, Comparison, Control, Extract, Logic, NumericConstants, Paren, Quotes, Reserved. and I then realized what I wanted to refer you to was most likely ?Quotes where all the R-specific escape sequence letters should be listed.
I have been mucking around with regex strings and strsplit but can't figure out how to solve my problem.
I have a collection of html documents that will always contain the phrase "people own these". I want to extract the number immediately preceding this phrase. i.e. '732,234 people own these' - I'm hoping to capture the number 732,234 (including the comma, though I don't care if it's removed).
The number and phrase are always surrounded by a . I tried using Xpath but that seemed even harder than a regex expression. Any help or advice is greatly appreciated!
example string: >742,811 people own these<
-> 742,811
Could you please try following.
val <- "742,811 people own these"
gsub(' [a-zA-Z]+',"",val)
Output will be as follows.
[1] "742,811"
Explanation: using gsub(global substitution) function of R here. Putting condition here where it should replace all occurrences of space with small or capital alphabets with NULL for variable val.
Try using str_extract_all from the stringr library:
str_extract_all(data, "\\d{1,3}(?:,\\d{3})*(?:\\.\\d+)?(?= people own these)")
I have this vector Target <- c( "tes_1123_SS1G_340T01", "tes_23_SS2G_340T021". I want to remove anything before SS and anything after T0 (including T0).
Result I want in one line of code:
SS1G_340 SS2G_340
Code I have tried:
gsub("^.*?SS|\\T0", "", Target)
We can use str_extract
library(stringr)
str_extract(Target, "SS[^T]*")
#[1] "SS1G_340" "SS2G_340"
Try this:
gsub(".*(SS.*)T0.*","\\1",Target)
[1] "SS1G_340" "SS2G_340"
Why it works:
With regex, we can choose to keep a pattern and remove everything outside of that pattern with a two-step process. Step 1 is to put the pattern we'd like to keep in parentheses. Step 2 is to reference the number of the parentheses-bound pattern we'd like to keep, as sometimes we might have multiple parentheses-bound elements. See the example below for example:
gsub(".*(SS.*)+(T0.*)","\\1",Target)
[1] "SS1G_340" "SS2G_340"
Note that I've put the T0.* in parentheses this time, but we still get the correct answer because I've told gsub to return the first of the two parentheses-bound patterns. But now see what happens if I use \\2 instead:
gsub(".*(SS.*)+(T0.*)","\\2",Target)
[1] "T01" "T021"
The .* are wild cards by the way. If you'd like to learn more about using regex in R, here's a reference that can get you started.
I am using the following code for finding number of occurrences of a word memory in a file and I am getting the wrong result. Can you please help me to know what I am missing?
NOTE1: The question is looking for exact occurrence of word "memory"!
NOTE2: What I have realized they are exactly looking for "memory" and even something like "memory," is not accepted! That was the part which has brought up the confusion I guess. I tried it for word "action" and the correct answer is 7! You can try as well.
#names=scan("hamlet.txt", what=character())
names <- scan('http://pastebin.com/raw.php?i=kC9aRvfB', what=character())
Read 28230 items
> length(grep("memory",names))
[1] 9
Here's the file
The problem is really Shakespeare's use of punctuation. There are a lot of apostrophes (') in the text. When the R function scan encounters an apostrophe it assumes it is the start of a quoted string and reads all characters up until the next apostrophe into a single entry of your names array. One of these long entries happens to include two instances of the word "memory" and so reduces the total number of matches by one.
You can fix the problem by telling scan to regard all quotation marks as normal characters and not treat them specially:
names <- scan('http://pastebin.com/raw.php?i=kC9aRvfB', what=character(), quote=NULL )
Be careful when using the R implementation of grep. It does not behave in exactly the same way as the usual GNU/Linux program. In particular, the way you have used it here WILL find the number of matching words and not just the total number of matching lines as some people have suggested.
As pointed by #andrew, my previous answer would give wrong results if a word repeats on the same line. Based on other answers/comments, this one seems ok:
names = scan('http://pastebin.com/raw.php?i=kC9aRvfB', what=character(), quote=NULL )
idxs = grep("memory", names, ignore.case = TRUE)
length(idxs)
# [1] 10