I made a little CSS animation with a simple svg to transition my hamburger menu to a cross. It works as expected on Chrome and Firefox, but the translation is off in Safari. The animation plays, and even resets correctly so it has nothing to do with prefixes (I tried). The translate of the two lines making the cross is just wrong.
I'm guessing it has something to do with how safari handles the transform when scaling is also applied. Does anyone know if there is a work around / or what I'm doing wrong?
JSFiddle
Safari / Firefox / Chrome
#keyframes showCross {
0% {
transform: scale(1) rotate(0);
}
40% {
transform: scale(0.3) rotate(280deg);
}
100% {
transform: scale(1) rotate(360deg);
}
}
#keyframes showCross_P1 {
0% {
transform: rotate(0);
}
100% {
transform: rotate(-45deg) translate(-42%, -10%);
}
}
I fixed it by doing the following:
First I removed the groups surrounding the paths.
Then I gave all the paths the following values:
transform-origin:center center;
transform-box: fill-box;
Next I edited the animation keyframes to look as follows:
0% {
transform: translate(0rem,0rem) rotate(0);
}
100% {
transform: translate(-10rem,-38rem) rotate(-45deg) ;
}
Safari has problems with percents and also if you put the rotation before the translate it has inconsistency with other browsers, use rem instead!
Why does the following clipPath animate in Chrome but not Firefox?
http://jsfiddle.net/H8S3k/67/
.graph {
transform: translateY(150px);
animation: 2s ease-out 0s normal none infinite popup;
}
#keyframes popup {
0% {
transform: translateY(50px);
}
50% {
transform: translateY(0px);
}
100% {
transform: translateY(50px);
}
}
In SVG 1.1, only certain attributes were deemed to be stylable with CSS. These particular set of attributes were called "properties". You can see the list of designated properties here:
https://www.w3.org/TR/SVG/propidx.html
transform is not one of those, so it cannot be styled with CSS.
However in SVG 2, which is not yet finalised, all SVG attributes will probably be made stylable. Chrome has begun implementing this, however Firefox has not yet. That is why your example works in Chrome but not Firefox.
This question was orginally related to FontAwesome, but is a general firefox problem.
So i'm using the class fa-spin that will spin the icon, here you can find some examples of it.
Here is the spinning css file:
// Spinning Icons
// --------------------------
.#{$fa-css-prefix}-spin {
-webkit-animation: spin 2s infinite linear;
-moz-animation: spin 2s infinite linear;
-moz-animation: spin 2s infinite linear;
-o-animation: spin 2s infinite linear;
animation: spin 2s infinite linear;
}
#-moz-keyframes spin {
0% { -moz-transform: rotate(0deg); }
100% { -moz-transform: rotate(359deg); }
}
#-webkit-keyframes spin {
0% { -webkit-transform: rotate(0deg); }
100% { -webkit-transform: rotate(359deg); }
}
#-o-keyframes spin {
0% { -o-transform: rotate(0deg); }
100% { -o-transform: rotate(359deg); }
}
#-ms-keyframes spin {
0% { -ms-transform: rotate(0deg); }
100% { -ms-transform: rotate(359deg); }
}
#keyframes spin {
0% { transform: rotate(0deg); }
100% { transform: rotate(359deg); }
}
Now all works fine in chrome and IE10, however it doesn't in firefox :
jsFiddle.
When you run it for the first time it looks just good, but try the interact with the site(for example: scroll or run the script again in jsFiddle). The animation becomes all jittery. I have no idea what could cause this strange behavior, hope that anyone could help me.
Edit
The problem occurs on Windows 7 32-bit and 25.0 version of Firefox(No add-ons).
However it does work at my home PC, where it also has Windows 7 32-bit 25.0 firefox.
An preview how it looks on my screen:
Note that it works for the first couple of seconds but after it will get jittery (this stuttering is because my .gif is bad).
See my answer for more information
Before you want to add this 'hack', you should first try to update your driver
What i did notice is that IE and Chrome actually makes the text blurry, which FF doesn't. I thought of using the blur filter, but that didn't work. Also the font width didn't stayed the same, so i needed something that or reminded the client of his width or force the width to be static at all time.
I came across the SVG filter XML url, that was special for Firefox 10+ and Firefox on android. I tryed to apply this to my element and my problem was completly gone!
i did use <feColorMatrix type=saturate values=1/> so the saturate filter didn't take away the colors.
filter: url("data:image/svg+xml;utf8,<svg xmlns=\'http://www.w3.org/2000/svg\'><filter id=\'grayscale\'><feColorMatrix type=\'saturate\' values=\'1\'/></filter></svg>#grayscale");
When adding this to the .fa-spin class that FontAwesome uses, it'll work on every spinning element.
jsFiddle
I'm looking to get a CSS3 animation to work; works fine in all major browsers but IE9 and older (no surprise there). So without further ado, here's the CSS :
#grosse_photo {
/*...*/
-webkit-animation: photoFade 12s infinite;
-moz-animation:photoFade 12s infinite;
-ms-animation: photoFade 12s infinite;
animation-iteration-count:1;
-moz-animation-iteration-count:1;
-webkit-animation-iteration-count:1;
-o-animation-iteration-count:1;
}
#-webkit-keyframes photoFade {
0% { opacity: 0.0; }
100% { opacity: 1.0; }
}
#-moz-keyframes photoFade {
0% { opacity: 0.0; }
100% { opacity: 1.0; }
}
#-o-keyframes photoFade {
0% { opacity: 0.0; }
100% { opacity: 1.0; }
}
#keyframes photoFadee {
0% { opacity: 0.0; }
100% { opacity: 1.0; }
}
I used the -ms prefix thinking it would react like -webkit, but obviously IE (lte 9) didn't cooperate.
I also need elements to slide in, but since IE won't cooperate, I'm thinking I'm forgetting an obvious polyfill other than modernizr.
Though not optimal, I've seen many refer to jQuery alternatives, though I am still looking for a snippet which will allow for different animations at different times and speeds.
I don't think that there is a direct polyfill for animations, that you don't introduce the animation commands by javascript.
For that you can go to jquery animate(), or you can try this one, more new:
http://www.polymer-project.org/platform/web-animations.html
If you need something for transition fallbacks, you can try:
https://github.com/addyosmani/css3-transition-fallbacks
IExplorer doesn't have opacity option, it has filter:alpha(opacity=77);
which is basicly the same just compability for IE
So, it is possible to have reverse animation on mouse out such as:
.class{
transform: rotate(0deg);
}
.class:hover{
transform: rotate(360deg);
}
but, when using #keyframes animation, I couldn't get it to work, e.g:
.class{
animation-name: out;
animation-duration:2s;
}
.class:hover{
animation-name: in;
animation-duration:5s;
animation-iteration-count:infinite;
}
#keyframe in{
to {transform: rotate(360deg);}
}
#keyframe out{
to {transform: rotate(0deg);}
}
What is the optimal solution, knowing that I'd need iterations and animation itself?
http://jsfiddle.net/khalednabil/eWzBm/
I think that if you have a to, you must use a from.
I would think of something like :
#keyframe in {
from: transform: rotate(0deg);
to: transform: rotate(360deg);
}
#keyframe out {
from: transform: rotate(360deg);
to: transform: rotate(0deg);
}
Of course must have checked it already, but I found strange that you only use the transform property since CSS3 is not fully implemented everywhere. Maybe it would work better with the following considerations :
Chrome uses #-webkit-keyframes, no particuliar version needed
Safari uses #-webkit-keyframes since version 5+
Firefox uses #keyframes since version 16 (v5-15 used #-moz-keyframes)
Opera uses #-webkit-keyframes version 15-22 (only v12 used #-o-keyframes)
Internet Explorer uses #keyframes since version 10+
EDIT :
I came up with that fiddle :
http://jsfiddle.net/JjHNG/35/
Using minimal code. Is it approaching what you were expecting ?
Its much easier than all this: Simply transition the same property on your element
.earth { width: 0.92%; transition: width 1s; }
.earth:hover { width: 50%; transition: width 1s; }
https://codepen.io/lafland/pen/MoEaoG
I don't think this is achievable using only CSS animations. I am assuming that CSS transitions do not fulfil your use case, because (for example) you want to chain two animations together, use multiple stops, iterations, or in some other way exploit the additional power animations grant you.
I've not found any way to trigger a CSS animation specifically on mouse-out without using JavaScript to attach "over" and "out" classes. Although you can use the base CSS declaration trigger an animation when the :hover ends, that same animation will then run on page load. Using "over" and "out" classes you can split the definition into the base (load) declaration and the two animation-trigger declarations.
The CSS for this solution would be:
.class {
/* base element declaration */
}
.class.out {
animation-name: out;
animation-duration:2s;
}
.class.over {
animation-name: in;
animation-duration:5s;
animation-iteration-count:infinite;
}
#keyframes in {
from {
transform: rotate(0deg);
}
to {
transform: rotate(360deg);
}
}
#keyframes out {
from {
transform: rotate(360deg);
}
to {
transform: rotate(0deg);
}
}
And using JavaScript (jQuery syntax) to bind the classes to the events:
$(".class").hover(
function () {
$(this).removeClass('out').addClass('over');
},
function () {
$(this).removeClass('over').addClass('out');
}
);
Creating a reversed animation is kind of overkill to a simple problem. What you need is:
animation-direction: reverse
However, this won't work on its own because animation spec forgot to add a way to restart the animation, so here is how you do it with the help of JS
let item = document.querySelector('.item')
// play normal
item.addEventListener('mouseover', () => {
item.classList.add('active')
})
// play in reverse
item.addEventListener('mouseout', () => {
item.style.opacity = 0 // avoid showing the init style while switching the 'active' class
item.classList.add('in-active')
item.classList.remove('active')
// force dom update
setTimeout(() => {
item.classList.add('active')
item.style.opacity = ''
}, 5)
item.addEventListener('animationend', onanimationend)
})
function onanimationend() {
item.classList.remove('active', 'in-active')
item.removeEventListener('animationend', onanimationend)
}
#keyframes spin {
0% {
transform: rotateY(0deg);
}
100% {
transform: rotateY(180deg);
}
}
div {
background: black;
padding: 1rem;
display: inline-block;
}
.item {
/* because span cant be animated */
display: block;
color: yellow;
font-size: 2rem;
}
.item.active {
animation: spin 1s forwards;
animation-timing-function: ease-in-out;
}
.item.in-active {
animation-direction: reverse;
}
<div>
<span class="item">ABC</span>
</div>
we can use requestAnimationFrame to reset animation and reverse it when browser paints in next frame.
Also use onmouseenter and onmouseout event handlers to reverse animation direction
As per
Any rAFs queued in your event handlers will be executed in the same
frame. Any rAFs queued in a rAF will be executed in the next frame.
function fn(el, isEnter) {
el.className = "";
requestAnimationFrame(() => {
requestAnimationFrame(() => {
el.className = isEnter? "in": "out";
});
});
}
.in{
animation: k 1s forwards;
}
.out{
animation: k 1s forwards;
animation-direction: reverse;
}
#keyframes k
{
from {transform: rotate(0deg);}
to {transform: rotate(360deg);}
}
<div style="width:100px; height:100px; background-color:red"
onmouseenter="fn(this, true)"
onmouseleave="fn(this, false)"
></div>
Would you be better off having just the one animation, but having it reverse?
animation-direction: reverse
Using transform in combination with transition works flawlessly for me:
.ani-grow {
-webkit-transition: all 0.5s ease;
-moz-transition: all 0.5s ease;
-o-transition: all 0.5s ease;
-ms-transition: all 0.5s ease;
transition: all 0.5s ease;
}
.ani-grow:hover {
transform: scale(1.01);
}
I've put together a CodePen with a CSS-only fix and one with 2 lines of jQuery to fix the on-page load issue. Continue reading to understand the 2 solutions in a simpler version.
https://codepen.io/MateoStabio/pen/jOVvwrM
If you are searching how to do this with CSS only, Xaltar's answer is simple, straightforward, and is the correct solution. The only downside is that the animation for the mouse out will play when the page loads. This happens because to make this work, you style your element with the OUT animation and the :hover with the IN animation.
svg path{
animation: animateLogoOut 1s;
}
svg:hover path{
animation: animateLogoIn 1s;
}
#keyframes animateLogoIn {
from {stroke-dashoffset: -510px;}
to {stroke-dashoffset: 0px;}
}
#keyframes animateLogoOut {
from {stroke-dashoffset: 0px;}
to {stroke-dashoffset: -510px;}
}
Some people found this solution to be useless as it played on page load. For me, this was the perfect solution. But I made a Codepen with both solutions as I will probably need them in the near future.
If you do not want the CSS animation on page load, you will need to use a tiny little script of JS that styles the element with the OUT animation only after the element has been hovered for the first time. We will do this by adding a class of .wasHovered to the element and style the added class with the OUT Animation.
jQuery:
$("svg").mouseout(function() {
$(this).addClass("wasHovered");
});
CSS:
svg path{
}
svg.wasHovered path{
animation: animateLogoOut 1s;
}
svg:hover path{
animation: animateLogoIn 1s;
}
#keyframes animateLogoIn {
from {stroke-dashoffset: -510px;}
to {stroke-dashoffset: 0px;}
}
#keyframes animateLogoOut {
from {stroke-dashoffset: 0px;}
to {stroke-dashoffset: -510px;}
}
And voila! You can find all of this and more on my codepen showing in detail the 2 options with an SVG logo hover animation.
https://codepen.io/MateoStabio/pen/jOVvwrM
Have tried several solutions here, nothing worked flawlessly; then Searched the web a bit more, to find GSAP at https://greensock.com/ (subject to license, but it's pretty permissive); once you reference the lib ...
<script src="https://cdnjs.cloudflare.com/ajax/libs/gsap/3.2.4/gsap.min.js"></script>
... you can go:
var el = document.getElementById('divID');
// create a timeline for this element in paused state
var tl = new TimelineMax({paused: true});
// create your tween of the timeline in a variable
tl
.set(el,{willChange:"transform"})
.to(el, 1, {transform:"rotate(60deg)", ease:Power1.easeInOut});
// store the tween timeline in the javascript DOM node
el.animation = tl;
//create the event handler
$(el).on("mouseenter",function(){
//this.style.willChange = 'transform';
this.animation.play();
}).on("mouseleave",function(){
//this.style.willChange = 'auto';
this.animation.reverse();
});
And it will work flawlessly.
Try this:
#keyframe in {
from {
transform: rotate(0deg);
}
to {
transform: rotate(360deg);
}
}
#keyframe out {
from {
transform: rotate(360deg);
}
to {
transform: rotate(0deg);
}
}
supported in Firefox 5+, IE 10+, Chrome, Safari 4+, Opera 12+