I want to Add Customer by sending request to Web Connector. I have done with the sample code provided by the SDK. I want to know the process of getting and sending data using Web Connector.
How can i call Quick Book Web Service and send request and retrieve data.
How can i call Quick Book Web Service
You can't.
That is not the way that the QuickBooks Web Connector works.
You're starting point should be to read the 98-page PDF about the QuickBooks Web Connector included with the QuickBooks SDK. Here's a link:
https://developer-static.intuit.com/qbSDK-current/doc/PDF/QBWC_proguide.pdf
As an overview, the way the Web Connector is a simple SOAP client that sits next to QuickBooks and it calls your web service, not the other way around. It polls a web service (SOAP) that you set up and essentially asks "Hey, what should I do?" over and over again. You then give it XML (qbXML) commands telling it what to do (e.g. <CustomerAdd>...</CustomerAdd>, etc.)
As an overview, you implement a SOAP web service with these methods:
array authenticate(string strUserName, string strPassword)
You should have the username and password stored in your web app.
If the username and password are valid, you generate a session ID (a “ticket”) and store this ticket in your database. Every subsequent call to you will include this ticket string, and you'll check to ensure the ticket is valid on every subsequent call.
You should then check to see if there is anything to do. You should be maintaining a queue of things to do within your SOAP server. Return an appropriate response per the spec.
string sendRequestXML(string ticket, string strHCPResponse, string strCompanyFileName, string qbXMLCountry, int qbXMLMajorVers, int qbXMLMinorVer)
The Web Connector will call this method to ask you "Hey, what should I do?".
You should check your internal queue of things to do, and pull the next item out of the queue. You should return a valid qbXML XML request for that queue item as a string.
So if you wanted to add a customer to QuickBooks, you'd return something like <CustomerAdd><Name>...</Name></CustomerAdd>
If you wanted to get a list of customers from QuickBooks, you can do something like <CustomerQuery>...</CustomerQuery>
integer receiveResponseXML(string ticket, string response, string hresult, string message)
This is how the Web Connector sends data back to you. So for example, if you told the Web Connector to add a customer, it's going to add the customer to QuickBooks and then send you an XML response telling you if it was successful or not.
That's all there is to it.
You need to implement a SOAP service with 3 very simple methods, and a queue full of XML commands.
A larger explanation, complete with SOAP and qbXML examples is here:
http://wiki.consolibyte.com/wiki/doku.php/quickbooks_web_connector
If you're developing in .NET, then you should install the QuickBooks SDK:
https://developer.intuit.com/docs/0250_qb/0020_get_set_up/sdk_downloads
Because it provides you with sample code in .NET which shows you how to implement all of this stuff. It gets put here on your computer when you install the SDK:
C:\Program Files (x86)\Intuit\IDN\QBSDK13.0\samples\qbdt\c-sharp\qbXML\WCWebService\
Related
This is a question to improve my understanding about OData and the process of OData services. I'm not sure about the process when an OData request is sent to the server from my Fiori app. The app is added to our Fiori Launchpad. When the user wants to create a new target group in the UI, a create request is sent. What happens then in detail? What I thought so far:
OData service checks the data
If the data is valid, a new entry in the database is created (HTTP POST)
If the data is not valid, the OData service sends an error
I'm not sure about what information is delivered by the OData service and what information is delivered directly from the database? Does the OData service work like a adjustor which transfers the messages sent from the database to the application?
I hope you can understand what I'm trying to figure out. Thank you for your time.
it depends how your backend-methods are implemented. Every Entityset usually has one of these Methods:
Get Entity
Get EntitySet
Create
Update
Delete
There are some more I guess, but these are mostly used by developers. You can redefine every single method and implement your own Business Logic in there.
So, let's assume you want to send data from the Frontend to your service and insert the data into a table inside your database. You have to redefine the create method of your entity and implement own logic. This could contain an insert into a database-table. You have to consider, that your oData Service will throw an Error if the types which are sent from the frontend do not match the Entity-Types (i.e. a String into an edm.Time type).
Here you can find all EDM.Types oData could consume and the correct mapping of the types:
https://help.sap.com/saphelp_gateway20sp12/helpdata/en/76/4a837928fa4751ab6e0a50a2a4a56b/frameset.htm
Hope this helps :)
I have following scenario:
User request for certain resource on server, This request is long running task and very like 2~3 seconds to 10 seconds. We issue a JobTicket to user, As our user want to wait.
On receiving request we store that request in persistence storage and issue a token to user as JobTicket (GUID).
User make connection with Hub to get information about that GUID.
In Background:
We have WAS Hosted as well as Windows Service to perform some operation on that request.
On complete, WAS Hosted/Windows Service call our Web Application that job has been completed.
From there based on job Ticket we identify which user and on its connection we let user know its job has been completed.
Now we have farm of servers, we are using Windows Server On Prem ServiceBus 1.1 which is working fine, But challenge we have is that we are not able to intercept ServiceBus based backplane message broadcast and message is going to all the client. As we have farm, user intermediately may have drop connection and connected to other server based on load balancer so we need to have scale out using Service Bus as its kind of seamless to integrate and we are also using for our internal purpose in our application so we don't want to user any other mix in complex solution.
I have tried using IHubPipelineModule but still Scale out message broadcast not passing thru that, I tried to hookup SignalR code directly and debug thru it but its taking long. I don't want to mess-up something arbitrary in actual code. As I can see that in OnReceive I can see message are coming, but not able to follow further. I just need small mechanism that I can intercept broadcast message and make sure that it goes to client it intended and not all the client by wasting resources, and security concern as well.
Please help me on this issue, it's kind of stuck from last 4 days and not able to come to any solution and same time I want to go with establish pattern and don't want to fork any special build for this kind of small issues which I am sure one of you expert knows how I can do that seamlessly.
Thanks,
Shrenik
After lots of struggling and not finding straight forward way, I have found the way as below for someone else in future it might help.
Scenario:
1. Web Farm: Host External User facing Web Pages
2. Backend Process: Which is mix of WebApi, SharePoint, Windows Service etc.
User from Web Page submit some request and get a unique id as return back. Internally on receiving request, we queue that request to Service Bus using TopicClient for processing.
There are pool of Windows Service watching on Message on Service Bus using SubscriptionClient and process that message. On completion of process which can run from 5 seconds to 30 seconds and some cases even more. We need to inform client that its job done if its waiting on web page or waiting for completion notification.
In this story, We are using SignalR to push job completion notification to client.
Now my earlier problem is How I let know from windows service to web application that job is done so send notification to client who submitted request.
One way is we hosted another hub internally in web application, Windows service act as client and call web application hosted hub, and in that hub method it will call external facing hub method to propagate message to specific client who submitted request, for which we are using Single user Group.
And as we have register service bus as backplane it will propagate to other servers and then appropriate client will get notification. So this is ideal solution and should work in most cases.
In above approach we have one limitation that, how Windows Service connect to Web Client, as we donot have windows auth, but we have openid based auth with ADFS. Now in such case Web Application required special code in which provide separate userid or password for windows service to communicate or have windows authentication also allowed for that hub for service account of windows service.
I was trying and trying how to remove all this hopes between interserver communication and again management of extra security.
So I did below with simplicity, though it tooks me whole night to find our internal of SignalR. But it works:
Approach is to send message directly to ServiceBus Backplane, and as all Web Server already hooked-up with ServiceBus backplane then they will get message.
Unfortunately SignalR doesn't provide such mechanism to send message directly to Backplane. I think its on pub/sub model so they don't want somebody to hack in their system :). or its violation of their pattern, but its make sense, in my case because of different roles and security, I have simplify code as below:
Create a ServiceBusMessageBus instance in my code, Same way as Below: Though I have created separate instance and store till lifetime of Windows Service, so I don't create instance every time:
ServiceBusMessageBus serviceBusBackplane = new ServiceBusMessageBus(new DefaultDependencyResolver(), new ServiceBusScaleoutConfiguration(connectionString, appName));
Create a ClientHubInvocation Object: This is a message which actually get created in SignalR infrastructure when Backplane based message broadcast:
ClientHubInvocation hubData = new ClientHubInvocation
{
Args = new object[] { msg },
Hub = "JobStatusHub",
Method = "onJobStatus",
State = null,
};
Create a Message object which accept by ServiceBusMessageBus.Publish, Yes, so this is a method which actually get called on base class ScaleoutMessageBus.Publish. This class is actually responsible for sending message to topic and other subscribers on other server nodes. Why not use that directly. Now to create Message Object, You need following code:
Message backplaneMessage = new Message(
sourceId,
"hg-JobStatusHub." + name,
new ArraySegment(Encoding.UTF8.GetBytes(JsonConvert.SerializeObject(hubData))));
In above second parameter is something interesting,
In case if you want to publish to all the client then syntax is "h-", in my case specific group user, so syntax is "hg-.. You can check the code here: https://github.com/SignalR/SignalR/blob/bc9412bcab0f5ef097c7dc919e3ea1b37fc8718c/src/Microsoft.AspNet.SignalR.Core/Infrastructure/PrefixHelper.cs
Publish your message to backplane directly as below:
await serviceBusBackplane.Publish(backplaneMessage);
I wish this PrefixHelper class have been public.
Remember: This is not recommended way and doent insulate from future upgrade for SignalR, as its internal they may change so any upgrade might come with small hazale to change this code. But in summary this works. Hope SignalR Team provide some mechanisam out of box to send message directly to backplane instead.
Thanks
I want to implement a query on my web page that gets results from another web service and displays them to the user. For this I ofcourse send the request as GET method from the web page. Server side, I process the request, get results from that web service and return them back to user.
However, I also want to save the results for future refernce. Something like history of queries. For this I will store the results in a database.
Now, the question is since I am upating my database everytime a query is made, should I be using POST method on the web page or GET would do? Does HTTP explicitly say anything for this scenario?
HTTP itself doesn't say you have to use POST -- the technology will work just fine if you're sending your data on queryparams.
But current convention says that you should use POST, specifically when using API services under a RESTful model. If you are passing data (even on the query params) that is creating a new record, it should use the POST verb. Updating it should use PUT.
It's going to get down to what your audience expects. If it's just an internal resource, go for it with GET. If you expect to open this up as a public service, use POST.
Have a SOAP Web Service that encapsulates calls to a 3rd party API... so our application can simply call my service and then my service handles all the various calls to the API. Works just fine.
However, we've hit a problem where the API we're connecting to allows a max of 10 connections at any given time for a given set of credentials.
Connections at most take a couple of seconds to process, but when we go live, we could in theory have users that max out this. So we've created multiple accounts (5) to the API giving us 50 connections across the 5 users.
How does ASP.NET handle connections to the Web service? I know it works asynchronously, but does it spawn multiple instances of my class or reuse the same class. Will variables persist across instances (i.e Will static variables work)?
What I need to do is if a call to the API fails on Client1, rollover to Client2 (or Clients[0], Clients[1]) etc... Sadly I have no way to detect if a given Client is out of connections at any given moment. I could poll it with a test call, but that would take time and be no guarantee the the client has a connection available when I make the call.
The API I'm calling is via XMLRPC Proxy class (CookComputing). Is the "connection" made when the Client is created or when the call is made, passing along the credentials?
public static IVoicestar GetClient(string userID, string password)
{
IVoicestar client = XmlRpcProxyGen.Create<IVoicestar>();
client.Credentials = new NetworkCredential(userID, password);
return client;
}
Seems from this that the credentials simply "ride along" until I make a call via Client.MethodCall() and then the connection is made.
If you are using ASP.NET Web Services (asmx) then it would spawn a new instance of your web service class for each request. In case WCF based web services, you can control the instancing /concurrency using attributes/configuartion (see this article) - you have three instancing modes possible - per call, per session and singleton.
Irrespective of what you are using, you can always implement your own pooling mechanism to pool your API connection. You already have a factory method to get the API client - just put call to pooling layer within method.
Normally Windows XP and Windows 7 have a limit of 10 concurrent TCP/IP connections. Maybe that's it. Be sure to work in a windows server version.
I want to log the assembly version information into a log file each time my WCF web service is called. I know that in an application the My object has an Application object which has the Info structure, that contains the Version string that I can use. How can I get the version information for the WCF service to a log?
You will need to create either a separate service method GetServiceVersionInfo() that you can call when needed, or you could include the service's version info in some headers that travel along with the message.
If you want to add header to each and every message, the best way to go is create an extension called a MessageInspector. This is a small chunk of code that intercepts every message (in your case: every message going out of the server) and adds some header (or manipulates the actual message).
Read up on Message inspectors in this blog post showing how to write a message inspector, or read the MSDN docs on the topic to get started.