I often include View() statements in my R scripts. If I accidentally forget the closing bracket at the end of the line, and then run the line of code from the script window using ctrl-enter, R just keeps trying to execute the remainder of my script. I don't know why it does that (rather than using the + symbol to prompt me to provide further input).
Moreover, I've tried to stop this by setting break points in my code - I can click on the LHS of the page and a little red circle appears. But the breakpoints don't seem to work - R just ignores them and keeps going.
The only way I can get out of it is by killing the process in the Windows task manager and then going back in afterwards. But it's wasting a lot of time.
Does anyone know how I can fix this please?
Thank you.
In effect, what your function is processing looks like that:
... %>% View(
lm(am~cyl, mtcars)
...
...
As R can't find the bracket for ) it includes remaining statements as input to View and searches for the bracket.
Solutions
Kind of depends on what you want to do with those scripts but if the intention is to run them in the background consider using callr. This package lets you run R from R and offers kill methods to kill the process you started that way.
On Windows pressing Esc should enable you to get back to the console but if it's a memory intense process it may be difficult.
You may try pressing Ctrl+c in order to kill the process.
I have just switched from windows 7 to windows 10 on my pc.
When I was still using windows 7, using the combination CTRL+R or CTRL+ENTER would run the line of code that I was in. Moreover, if the code continued on one or more lines below or started above my current line, it would run the entire section without me having to select it.
After switching to windows 10, the same combinations will only run the line of code that I am currently in, or the piece of code that is selected by me. To give an example:
#Tryout
for(i in 1:3){
print(i)
}
This code would normally run at once without having to select it, even when I would start in the first line (#Tryout). Now, if I don't select, I will need to use CTRL+R or CTRL+ENTER three times to go through this code and I have to start in the correct line. Starting in the line #Tryout will not run any part of the code but will only result in the line #Tryout being shown in the console.
I'm not good with computers (in your answers please pretend to be adressing a five-year-old) so I had one of my colleagues look at it who's our expert on R. Here are the findings:
The problem occurs in both RStudio as the standalone version of R.
I'm using R version 3.3.2, the same as before the windows update. Switching to version 3.5 didn't solve the problem.
I have other colleagues also using R 3.3 in combination with windows 10 for whom this problem does not occur.
Going to Tools-Global Options-Code and checking the box of 'Focus console after executing from source' doesn't help
When we went to 'Modify Keyboard Shortcuts', the name attached to the shortcut (CTRL+R or CTRL+ENTER) was the same as it was for other colleagues for which the function does run all lines in a command: 'Run Current Line or Selection'
The problem is not preventing me from using R, but it is tedious and I hope someone can help me to solve it.
Thanks so much for reading!
Click on header Tools, then Global Options..., then Code, then Ctrl + Enter Executes and choose Multi-line R statement
#M Waz & #Just Burfi: I know I can select the code and then run it, that works fine. But I don't want to have to manually select the code all the time.
#Clemsang: your answer puzzled me for a moment because I didn't have the CTRL + Enter Executes that you were referring to. I went back to my colleague who had the bright idea to check the version of RStudio that I was using.
As it turns out, I was using an old version (0.99.903). Now that I've installed a newer version (1.1.463), running the code works as before! I also have the CTRL + Enter Executes now.
I'm seeing a very strange issue with R (v 3.3.2, running on the command line of a CentOS 7 linux box). If I execute a command that goes over one line in the terminal, the output appears at the beginning of the second line of the command. This didn't happen with previous versions of R, though it does happen with later versions I've installed. I am using Putty as the terminal, but it also happens if I use xterm.
To describe it better, it looks like this:
> tmpvaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaal=1 [before hitting enter]
> tmpvaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
> aaaaaaaaaaaaaaaal=1 [after enter, typing overwrites the a's now]
If the multiline command outputs something, that output occurs on the second line and overwrites the a's. If there is an error, then the error message terminates properly and the next prompt follows the error message. So does anyone have any ideas? Thanks in advance!
Update: After some more experimenting, I've found another odd behavior. If I use CTRL-R to search for a previous multiline command, and then execute it, the output or subsequent prompt appears at the same location in the command as where the cursor was. Here's another example:
(reverse-i-search)`1':tmpvaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaal=1[cursor on one before hitting enter]
[hit enter and then:]
>tmpvaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
aaaaaaaaal=1
aaaaaaaaal=>
Pretty strange. Hard to describe so its hard to find any evidence of other problems like this on stack-exchange or elsewhere. My feeling is it has to do with the readline library but it is strange because this doesn't happen in the shell command line, only in R as far as I can tell.
Update 2: I've found a potentially more revealing way to replicate this issue. If you manually add a bunch of newlines (by jamming CTRL-V CTRL-J repeatedly), then hit enter, the next prompt jumps right back up to underneath the last one. This is not what happens in the underlying shell (bash for me), or in previous versions of R that I can check.
Just to have the answer out there in case anyone else has this issue, the problem was that my system was using an old version of the readline library, 6.2, and the issue disappeared when updating it to the current version, 7.0. So it would seem that even though later versions of R will install with the outdated readline, they don't exactly work correctly.
The problem is that when I run the code, there's no return in the console; I mean it does run the code, but does not return any output.
For example, if I write
v <- c(1, 2, 3, 4, 5)
v
I would expect in return
[1] 1 2 3 4 5
But it's not working.
I have version RStudio Version 0.98.1079 and R Version 3.1.1
Possibility 1 (until the + sign was mentioned): I was wondering if you had been doing a tutorial where they were demonstrating the sink function and you hadn't gotten to the point where it was reversed.
> sink('out.txt') # diverts all output to a disk file
> v <- c(1,2)
> v # output went to file
> sink() # sets the output back to the console
> v
[1] 1 2
Another way would be to call closeAllConnections:
> sink('out.txt')
> v
> v
> closeAllConnections()
> v
[1] 1 2
Possibility 2: To address the lack of response with a "+" showing at the Rstudio console ... that is a sign that the R parser "thinks" the entered text has not completed a full R command. It may indicate that you haven't typed a closing bracket or parenthesis. If typing one or two of those is unsuccessful and you keep getting mor +'s then you may be successful with typing the [esc]-key. If it is showing up immediately after a restart then you should check your code for correctness and make sure that the .Rdata file is deleted from your working directory. If you don't know what that means then you may need to search for the methods appropriate to your operating system. You could also have an error in the code of one of your .rprofile files.
In any case these two possibilities have nothing to do with Rstudio per se and everything to to with the typical behavior of an R console session in pretty much any IDE.
Do the lines still start with a "+"? It is also possible you forgot to close the brackets of a function. Try "}".
I had the same issue and none of the tips mentioned here were working.
Session > Restart R did the trick for me, possibly suggesting that I had a similar problem as andrewH but was not patient enough to wait for R to behave again.
This is a very old question, but I just had the same problem with a different cause, so I thought I would describe it here case it should be useful to someone else. I was getting the regular command prompt, with nothing more, no matter what I typed at the command line. I tried multiple returns, escape, sink, traceback, closeAllConnections (which did give me a response, "error: unexpected ) in (), but then went back to the command prompt and ignored a second traceback).
Anyway after half an hour or so of pulling my hair out, up pops "View(Mid2)". Mid2 is a tibble with 8.5 million observations of 88 numeric variables. I must have tapped it in the environment pane accidentally. I suppose it just took that long for the viewer to render it. I assume that all the other things I did hit at once, because RStudio crashed immediately thereafter.
The interesting thing about this particular version of the problem is what didn't happen. The red stop sign in the upper right of the console window, that lights when R is busy, didn't light. That is unfortunate -- but understandable, if the RStudio viewer is a different process. But also, when my computer is working hard on a really big computation or IO task, the fan usually starts, but it didn't. Don't know why. . I took its absence, incorrectly, to mean no such computation was underway.
If the lines in console are starting with "+".
Save your work and close the 'RStudio' or other tool which you are using and Start it again, it worked for me.
If you are using R Studio Cloud, refresh or re-opening won't work.
Only clue from the above posts or answers is your console will always start with '+'
In my case I tried all possibilities of closing braces.
And ")" worked for me when I typed that into the console and press enter.
sink() function did nothing in R Studio Cloud
A simple mistake might have also caused this problem:
A rather lengthy command left abandoned in the console is blocking the appearance of the result line.
Thus, the console only shows that line, but the result from any code run from the source, will not appear.
To solve this, just switch to the console, remove any remaining command and try again.
Experiencing something like that explained here as an unresponsive console to the R-Code running was just devastating for me when I experienced it. But luckly although I tried every trick explained in this page, it did not work for me. At last I clicked on the "To console" option available just below the Environment, History, Connections, Tutorial Tab on the R Studio. It solved the puzzle for me just now.
The best solution I've found is closeAllConnections and/or sink which almost always work
But as a stop gap measure, View()'ing always works. It's sort of a pain but whatever you wanted to print out, surround by View and you can see it
I have a long calculation running (for days). I can stop it and restart it as desired, as I can save the output and start from where I left off, but I would appreciate the option of doing so without quitting (or force quitting) R, i.e. by just pressing the red stop button in the GUI. However this seems to be impossible in some instances of running the exact same calculation (or sort of calculation): the stop button is greyed out. I would like to know if there's a criterion determining when and why this happens, and a solution to avoid the force quit option.
I'm running R version 3.0.1 (GUI Cocoa 1.61) on a Mac OS 10.7.5,
Thanks