I am trying to insert data in a temp table(my_temp_table) using View(VWBLKDATA) as follows but getting compilation error "Error(7,15): PL/SQL: ORA-00942: table or view does not exist". However i am able to successfully execute view separately.
create or replace PROCEDURE InsrtInTemp
AS
BEGIN
INSERT INTO my_temp_table SELECT * FROM VWBLKDATA;
COMMIT;
END InsrtInTemp;
But when i am writing dynamic query as below, it compiles successfully
create or replace PROCEDURE InsrtInTemp
AS
intrtmp VARCHAR2(200);
BEGIN
intrtmp := 'INSERT INTO my_temp_table SELECT * FROM VWBLKDATA';
EXECUTE IMMEDIATE intrtmp;
END InsrtInTemp;
Please help me understanding this behavior.
Related
When using a stored procedure to dynamically generate a table based on configuration and return a result set (SELECT) with the records in that table, the second call to that procedure to generate a different table structure returns no records and it reports a missing column from a previous temporary table of the same name.
I tried this with MariaDB 10.3 and 10.1.21 and received the same result. I have minimized my code here to the minimum to demonstrate the error after trying several variations of single and multiple sub-procedures.
I also tried using some transaction control with COMMITS after executing the process, before trying to start the process with a different parameter, but got the same results.
DROP PROCEDURE IF EXISTS CreateATable;
DELIMITER $$
CREATE PROCEDURE CreateATable( _TableType tinyint )
BEGIN
DROP TEMPORARY TABLE IF EXISTS aTable;
IF _TableType = 1 THEN
SET #SQL_Statement :=
CONCAT(
'CREATE TEMPORARY TABLE aTable (',
'the_id bigint, ',
'the_column varchar(100) ',
') engine=INNODB',
';');
ELSE
SET #SQL_Statement :=
CONCAT(
'CREATE TEMPORARY TABLE aTable (',
'the_id bigint, ',
'the_other_column varchar(100) ',
') engine=INNODB',
';');
END IF;
PREPARE stmtCreateTable FROM #SQL_Statement;
EXECUTE stmtCreateTable;
DEALLOCATE PREPARE stmtCreateTable;
SET #SQL_Statement := NULL;
END$$
DELIMITER ;
DROP PROCEDURE IF EXISTS GetATable;
DELIMITER $$
CREATE PROCEDURE GetATable()
BEGIN
CALL CreateATable( 1 );
SELECT * FROM aTable;
CALL CreateATable( 2 );
SELECT * FROM aTable;
END$$
DELIMITER ;
DROP PROCEDURE IF EXISTS GetATable2;
DELIMITER $$
CREATE PROCEDURE GetATable2(_TableType tinyint)
BEGIN
CALL CreateATable( _TableType );
SELECT * FROM aTable;
END$$
DELIMITER ;
/*
Test execution script starts here
*/
-- Just CALL Create for one and Select
CALL CreateATable( 1 );
DESCRIBE aTable;
SELECT * FROM aTable;
CALL CreateATable( 2 );
DESCRIBE aTable;
SELECT * FROM aTable;
-- -> no errors
-- now CALL procedure to Create and Select from two different temp tables
CALL GetATable();
-- -> no errors
-- now CALL procedure to CREATE AND SELECT from ONE temp table definition using a parameter to select
CALL GetATable2(1);
CALL GetATable2(2);
-- Error Code: 1054. Unknown column 'mySchema.aTable.the_column' in 'field list'
I would expect that I can pass a parameter to a stored procedure to generate a temporary table, and return the records of that temporary table. Even if I call that same procedure multiple times with different parameters on the same session.
The actual results are that when the stored procedure is called to generate the temporary table with a different table structure, it returns this error complaining about the column missing from the temporary table created in the previous invocation of that same stored procedure.
Error Code: 1054. Unknown column 'mySchema.aTable.the_column' in 'field list'
The only way I have found to prevent this error is
a. ending the jdbc connection and ending the server session
b. recompiling one of the stored procedures in the call stack
Recompiling is not viable. And ending the session seems unreasonable.
This seems like a defect. But would be interested to find if there is some way to get this to work.
This seems like a bug and you can report it directly to the MariaDB team at MariaDB bugs database.
A temporary solution is to use a prepared statement in the stored procedure GetATable2 (my test on MariaDB 10.3.16 to use EXECUTE IMMEDIATE):
...
CREATE PROCEDURE `GetATable2`(`_TableType` TINYINT)
BEGIN
CALL CreateATable(`_TableType`);
-- SELECT * FROM `aTable`;
EXECUTE IMMEDIATE 'SELECT * FROM `aTable`';
END$$
...
See dbfiddle.
FOR k in c2 LOOP
l_sql := 'ALTER TABLE :TABLE_NAME DISABLE CONSTRAINT
:CONSTRAINT_NAME CASCADE';
l_sql :='INSERT INTO TMP_CONSTRAINT (TABLE_NAME,CONSTRAINT_NAME)
VALUES ('':TABLE_NAME'', '':CONSTRAINT_NAME'')';
EXECUTE IMMEDIATE l_sql USING k.TABLE_NAME, k.CONSTRAINT_NAME;
END LOOP;
Above dynamic SQL to take the variable from a cursor and disable constraint accordingly and insert record to a temp table. I am getting error "bind variable does not exist" in the update statement.
It is actually caused by the single code in INSERT
Corrected as per following:
l_sql :='INSERT INTO TMP_ENABLED_CONSTRAINT (TABLE_NAME,CONSTRAINT_NAME) VALUES (:TABLE_NAME ,:CONSTRAINT_NAME)';
I am trying to implement Trigger that raises an User Defined Error Message and does not allow the update and Insert operation in the database.I am new to pl/sql i refereed some code from the internet and try to implement.My code is running is fine as i can not update/insert into database but still i am unable to get my user defined message and also i am getting this warning.
Warning: Trigger created with compilation errors ?
This is the table :
Name Null? Type
----------------------------------------- -------- ----------------------------
ID NUMBER(5)
NAME VARCHAR2(20)
SALARY NUMBER(10)
DEPOT_ADDRESS VARCHAR2(15)
here is my code :
create or replace trigger cleaner_before_update_insert
for update or insert on cleaner
compound trigger
count binary_integer;
before statement is
begin
count:=0;
end before statement;
after each row is
begin
count :=count +1;
end after each row;
after statement is
begin
if count > 0 then
raise_application_error( -20001,'Update/insert operation can not be completed ');
end if;
end after statement;
end cleaner_before_update;
/
can anyone help me figure out what is the problem here and way to fix it.
thanks in advance.
Even after compilation of the code it is giving me this error.
ORA-06512: at "SYSTEM.CLEANER_BEFORE_UPDATE_INSERT", line 18
ORA-04088: error during execution of trigger
'SYSTEM.CLEANER_BEFORE_UPDATE_INSERT'
There are couple of problems with your TRIGGER block.
The name of the Trigger cleaner_before_update_insert does not match with the cleaner_before_update after the final end statement.
COUNT is an SQL keyword which is not allowed to be used as a variable in PL/SQL.You would receive the error - Error(10,11): PLS-00204: function or pseudo-column 'COUNT' may be used inside a SQL statement only
So, here is the modified code.
CREATE OR REPLACE TRIGGER cleaner_before_update_insert FOR UPDATE OR
INSERT ON cleaner compound TRIGGER
v_count binary_integer;
before STATEMENT
IS
BEGIN
v_count:=0;
END before STATEMENT;
AFTER EACH row
IS
BEGIN
v_count :=v_count +1;
END AFTER EACH row;
AFTER STATEMENT
IS
BEGIN
IF v_count > 0 THEN
raise_application_error( -20001,'Update/insert operation can not be completed ');
END IF;
END AFTER STATEMENT;
END cleaner_before_update_insert;
/
Let's have a look on my source code:
CREATE OR REPLACE PROCEDURE MAKE_COPY_OF_CLASSROOMS AUTHID CURRENT_USER AS
TYPE classrooms_table_type IS TABLE OF classrooms%ROWTYPE INDEX BY PLS_INTEGER;
classrooms_backup classrooms_table_type;
CURSOR classrooms_cursor IS
SELECT *
FROM classrooms
WHERE year = 1
ORDER BY name;
v_rowcnt PLS_INTEGER := 0;
BEGIN
OPEN classrooms_cursor;
FETCH classrooms_cursor
BULK COLLECT INTO classrooms_backup;
CLOSE classrooms_cursor;
EXECUTE IMMEDIATE 'CREATE TABLE classrooms_copy AS (SELECT * FROM classrooms WHERE 1 = 2)';
--COPY ALL STORED DATA FROM classrooms_backup TO classrooms_copy
END MAKE_COPY_OF_classrooms;
I'm stucked for hours on trying to insert data from "classrooms_backup" into the table "classrooms_copy", which is created by EXECUTE IMMEDIATE command. It's necessary to create table "classrooms_copy" via EXECUTE IMMEDIATE command. I tried to create another EXECUTE command with for loop in it:
EXECUTE IMMEDIATE 'FOR i IN classrooms_backup.FIRST..classrooms_backup.LAST LOOP
INSERT INTO classrooms_copy(id,room_id,year,name)
VALUES(classrooms_backup(i).id,classrooms_backup(i).room_id,classrooms_backup(i).year,classrooms_backup(i).name);
END LOOP;';
But it's road to the hell. I'm retrieving an invalid SQL statement error.
Thanks for your help!
There's no need for much PL/SQL here. Also, try to avoid the keyword CURSOR - there's almost always a better way to do it.
create or replace procedure make_copy_of_classrooms authid current_user as
begin
execute immediate '
create table classrooms_copy as
select *
from classrooms
where year = 1
order by name
';
end make_copy_of_classrooms;
/
I have written a PL/SQL Procedure which compares data between two tables and print the difference if any, but the twist is the table names to the procedure is dynamic. Here is the procedure
create or replace PROCEDURE compareTables(
tabA IN VARCHAR2, tabB IN VARCHAR2) AS
cur_tab_name USER_TABLES%ROWTYPE;
lv_sql varchar2(4000);
lv_sql2 varchar2(4000);
BEGIN
--SELECT TABLE_NAME INTO cur_tab_name FROM USER_TABLES WHERE TABLE_NAME = tabA;
lv_sql2 := 'SELECT TABLE_NAME FROM USER_TABLES WHERE TABLE_NAME = :b_tabA';
EXECUTE IMMEDIATE lv_sql2 INTO cur_tab_name USING tabA;
<<child>>
DECLARE
TYPE cursor_ref IS REF CURSOR;
cur_comp_result cursor_ref;
rec_comp_result cur_tab_name.TABLE_NAME%rowtype;
BEGIN
lv_sql := 'SELECT * FROM '||tabA||' MINUS SELECT * FROM '||tabB;
OPEN cur_comp_result FOR lv_sql;
LOOP
FETCH cur_comp_result INTO rec_comp_result;
EXIT WHEN cur_comp_result%NOTFOUND;
DBMS_OUTPUT.PUT_LINE(rec_comp_result.empid || '' || rec_comp_result.name);
END LOOP;
CLOSE cur_comp_result;
Exception
When others then
dbms_output.put_line('The Problem is '||sqlerrm);
END;
END compareTables;
Now the problem is when I compile this procedure I am getting the following error
Error at line 14: PLS-00310: with %ROWTYPE attribute, 'CUR_TAB_NAME.TABLE_NAME' must name a table, cursor or cursor-variable
line 14:rec_comp_result cur_tab_name.TABLE_NAME%rowtype;
how will I solve it?
*NB: I don't have oracle installed in my system. I am using Oracle Apex Online tool which uses
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 and
PL/SQL Release 11.2.0.3.0
As a test, go to the last line, and after the semicolon, hit enter.
I know that Pro*C in particular will gag without a line terminator at the end of the file.
You may be encounting that issue.
Outside the scope of your question consider
SELECT columns
FROM TABLE1
MINUS
SELECT columns
FROM TABLE2
and
SELECT columns
FROM TABLE2
MINUS
SELECT columns
FROM TABLE1
Use: cur_tab_name.table_name. The variable CUR_TAB_NAMEis of type USER_TABLE%ROWTYPE, thus it has several fields.