Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 7 years ago.
Improve this question
I need to enable my eth0 network which is configured with a static IP with the network manager. I have also multiple VM's and all that in one machine. I need to test one Server VM which is also configured with a static IP.
Now I want to connect to this VM's with the host machine. But the host machine don't enables the eth0 because there is no cable plugged in. Furthermore I don't have the possibility to use a cable or any kind of physical network, because it will be a live demo.
The VM's are Virtualbox Machines which are "connected" with as a network bridge on eth0.
If your host machine has wifi feature built in, you can use the bridged network mode :
Turn on wifi hotspot feature on your smartphone
Connect host machine to your smartphone's hotspot network
In the VM's settings, use bridged network and choose the host's wireless adapter as the source
And done.
Related
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 1 year ago.
Improve this question
On Windows 10 i try to set up a ubuntu server VM with a static IP.
How can i accomplish this ? I heard that i have to use a bridge connection ?
I want the ip of my vm be accessible from my windows session.
Thanks
If you require the guest to be accessible from the local LAN you will need to use the bridged adapter, thus allowing DHCP from the directly connected LAN. (you can take the DHCP address and statically assign it to the guest or do a DHCP reservation)
Another option is to setup a NATNetwork (VirtualBox/Preferences) setup Port Forwarding to allow your VirtualBox host (192.168.56.0/24) to forward tcp/udp to your static assigned guest IP 10.0.2.x/24
Host request
https://192.168.56.x:1234 will be forwarded to your unbuntu guest static IP of 10.0.2.x:443
External request will require routing tables on the remote computer to be added or windows 10 LAN default gateway will require static route for 192.168.56.x/24 via Windows 10 LAN IP, however your host firewall rules will have to configured.
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 6 years ago.
Improve this question
I have Mikrotik router with Wifi connected to:
WAN/internet on port ether1.
Other ports are for LAN 10.0.1.*.
Only port ether8 is connected to another simple POE switch. Four IP cameras with static IP are connected. This is LAN2 192.168.50.*. Port is not included in bridge or switch.
From main LAN I can access internet and other PC on same LAN, but can't access IP cameras on LAN2.
So, what is wrong/missing in my Mikrotik configuration:
/ip address
add address=10.0.1.1/24 comment="default configuration" interface= ether2-master-local network=10.0.1.0
add address=10.0.0.18/30 interface=ether1-gateway network=10.0.0.16
add address=192.168.50.253/24 interface=ether8-master-local-SUBNET network=
192.168.50.0
/ip route
add distance=2 gateway=10.0.0.17
No ping or trace route can reach LAN2 from main LAN.
If I connect to POE switch with my laptop and configure static IP in range 192.168.50.* than I can access all cameras OK.
If try ping IP camera directly from Mikrotik via ether8 than I get random mix of timeouts and success which is really strange.
Any help is appreciated.
did you set 192.168.50.253 as gateway in your IP cameras ? So they know how to reply to 10.0.1.0/24 when they receive a ping.
As for the random success ping problem, this is weird indeed, maybe an IP conflict (did you try with only 1 camera plugged?)
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 8 years ago.
Improve this question
I have virtualised an ancient XP machine that was on physical hardware that was dying and am running the VM from inside a windows 8 64-bit host on the same network.
The VM is required to be on the same network as host as it is the only thing configured to talk to a piece of equipment connected on the network.
However when I set the adapter to Bridge mode in the VM the XP Vm doesnt recieve an IP address and cant communicate on the network. It works in NAT mode, however then the VM cant be on the same network as host and see the hardware that it needs to talk to.
Any one think of a reason why Bridge mode isn't working? and what I could do to fix it.
Summary
Windows 8 64bit, VM Player 10 Host
XP 32bit VM.
Bridged adaptor not working on host network.
Ok well the answer was not so simple.
Basically the switch that the host computer is connected to is a Cisco switch with port security enabled. So it wasn't allowing the second MAC address from my VM access to the network. I contacted the networking guys and they removed port security for the particular port (or upped the limit on the number of devices allowed on the port) and all is good now.
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 5 years ago.
Improve this question
I am running Tunnelblick from my Mac.
My local network is 192.168.0.0/32 and the network I am trying to connect is 192.168.252.0/22.
Also, I am using a VM (Parallels) running Windows 8.1.
I want to connect to a VPN from my Mac and share this network with my VM.
So, I am facing some problems to do that. Here they go:
When I'm connected to the VPN, my ip address does not change to the ip address from the VPN network. My ip is still 192.168.0.132.
Despite the problem with the ip address, from the host I still can 'ping' the hosts from the network I am trying to connect writing 'ping host.domain.com'. But 'ping host' does not work.
I've already set the network to ‘shared’ in the device menu from Parallels. But, even with this, my ip address from the VM is 10.211.55.4.
In my VM I can't even ping the hosts from the other network
I'm sorry if I wasn't clear enough. All this problem is a little complex to describe.
Something important: The same configuration file I am using works perfectly (without the IP and the DNS problems) when I am using a Windows machine.
Change the VM's network adapter type to "Shared" within Parallels Desktop.
Configure virtual machine
Change network source to shared network
if that still does not work, disable ipv6 in guest machine.
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 9 years ago.
Improve this question
Few days ago it was working fine but I don't know what happened yesterday it stopped working.The internet connection is fine in windows os but when I open vmware workstation then it won't work.In my network sharing I have vmware network adapter VMNET8 which I have configured for internet connection in vmware workstation as I said it was working fine but now it is not working when I start diagnose it says that the VMNET8 does not have a valid ip configuration and it is on DHCP. I am totally confused what to do.
Go to your network sharing open the properties of Vmware network adapter vmnet8 and vmnet 1 and mark the bridge protocol than go to there ipv4 addresses and give them the same ip addresses as you have on physical machine and change the vmware machine setting to bridge protocol check out it will work 100%.
if you need further detail how to fix your vmvare networking issues follow the link along.vmware bridging and vmnet and nat network configuration