I'm having problems trying to install Wordpress to Plesk on my VPS. Everytime i go install wordpress it gets 100% then shows this message?
ERROR: Call to undefined method PHosting_Apache::getPHPCliPath() (Adapter.php:134)
I have re-imaged the server a few times now and still get the same problem.
Server Software : CentOS 6 with Parallels Plesk Panel 12 (64-bit)
Any suggestions?
Installation of microupdates was not completed successfully. Re-install micro updates by executing the below command:
/usr/local/psa/admin/bin/autoinstaller --install-component base --select-product-id plesk --select-release-current --reinstall-patch
Here is what I did that helped:
Install PHP 5.6 (or latest)
[Find Plesk Add/Remove Components][1]
Locate PHP installation (mine was here)
[Drill down into PHP option][3]
Install latest PHP
I went back and installed wordpress and it went through. Hope this helps
Related
Trying a fresh install of Silverstripe 4.0.1 but only gets this far -
Installing SilverStripe...
I am now running through the installation steps (this should take about 30 seconds)
If you receive a fatal error, refresh this page to continue the installation
Setting up /var/www/duonsdev/public_html/index.php
Setting up /var/www/duonsdev/public_html/mysite/_config.php
Setting up /var/www/duonsdev/public_html/mysite/_config/theme.yml
Setting up /var/www/duonsdev/public_html/.env
Setting up /var/www/duonsdev/public_html/.htaccess
Building database schema...
ERROR [Emergency]: Uncaught TypeError: Return value of Symfony\Component\Filesystem\Filesystem::toIterable() must be an instance of Symfony\Component\Filesystem\iterable, array returned IN POST /install.php Line 729 in /var/www/duonsdev/public_html/vendor/symfony/filesystem/Filesystem.php Source ====== 720: } 721: 722
And the error goes on and on. I tried refresh, but same error.
If I try a dev/build instead then it always dies at the point of -
Index File_Versions.OwnerID: created as index ("OwnerID")
Website Error
There has been an error
The website server has not been able to respond to your request
Trying to setup on Ubuntu 16 on local dev machine running Apache virtual host.
Never had this problem before and setup fine with ss4.0.
Any ideas?
I ran into the same issue, and after checking in the official SilverStripe Community's slack channel, they mentioned this is because I was not running PHP 7.1.
Apparently, the official SilverStripe tarball offered in their website was built with PHP 7.1, so Composer added newer Symfony dependencies. They mentioned this would be fixed in newer releases.
Therefore, there are 2 ways you can fix this issue:
Download SilverStripe with Composer:
$ curl -sS https://getcomposer.org/installer | php
$ ./composer.phar create-project silverstripe/installer /var/www/duonsdev/public_html/
Update your PHP version to 7.1.
After doing any of those steps, you will be able to access the web wizard for installing SilverStripe.
NOTE: If you're on a shared hosting, you will need to download SilverStripe on your local machine (ensuring the PHP version matches, at least in the major version, e.g. 7.0), and upload the files that were generated to your public_html directory.
Make sure the module php version of apache in the same version as the cli php version.
Looks like the error was to do with the php version.
I was installing silverstripe through the cli using composer, but running a different version of php in apache.
So in the cli the php version was php 7.1
But in apache the php version was php 7.0.
After changing the apache php to match the cli (because silverstripe was installed using composer in the cli) it worked!
I have minor problem here. I try to install phpmyadmin in my machine. Before I start install phpmyadmin, I have done installing LEMP.
Details:
Ubuntu 16.04
Nginx 1.9.15
MySQL 14.14
PHP 7.0.4
Steps for install phpmyadmin I follow here:
How To Install and Secure phpMyAdmin with Nginx on an Ubuntu 14.04 Server
After I done with installing phpmyadmin then I go to my web browser and click this http://server_domain_or_IP/phpmyadmin. It should show up interface of phpmyadmin. But mine show a pop out like this.
I do not have an idea what is happening. Hope anyone can help me.
thank you!
It seems like nginx is running but doesn't know how to handle the PHP processing. Try
service nginx restart
If that doesn't work, try making a basic PHP file in the server root, something like:
<?php echo "PHP is working"; ?>
And see if you can get that to load properly.
If you pass those two steps and still have trouble, my next guess is that the phpmyadmin site is not properly enabled. Check that the link for the site points to the right place. This talks about virtual hosts (albeit for Ubuntu 12.04 but should work):
https://www.digitalocean.com/community/tutorials/how-to-set-up-nginx-virtual-hosts-server-blocks-on-ubuntu-12-04-lts--3
If it still doesn't work, you can download the tar.gz of phpMyAdmin and manually configure to see that it gets going.
I haven't been able to install new plugins or updating plugins after upgrading to wordpress 4.3 on my Ubuntu Server 12.04.5 32bit machine. Usually I could just do it by clicking on the "update" link that's associated with a specific plugin. And it will update it successfully with less than a minute. But this time, it took so long and at the end, it threw out error "download failed, couldn't connect to host".
Then, I thought and guessed that it might be to do with the new wordpress 4.3. So I downgraded it back to previous version 4.2.4 and tried to update the plugin that needs updating. It also took so long and in the end, gave the same error message.
The strange thing is that I haven't made any changes to my Ubuntu server in terms of firewall at all.
My installed PHP version is 5.5.25 and apache is 2.4.12.
The permission of my wp-config.php is 644.
I don't know what else to look. Any help would be greatly appreciated.
Thank you in advance
did you install the correct .dll files in system directory? uninstall the program and try running a system repair and .dll file patcher
I'm new to the symfony2 and I was following http://symfony.com/doc/current/book/installation.html for installation using Composer now
It gives me a Fatal Error after some time:
monolog/monolog suggests installing rollbar/rollbar (Allow sending log messages to Rollbar)
Writing lock file
Generating autoload files
Fatal error: Call to undefined method Sensio\Bundle\DistributionBundle\Composer\ScriptHandler::defineDirectoryStructure() in /Users/app/SymfonyStandard/RootPackageInstallSubscriber.php on line 28
#hap absolutely right on Debian/Ubuntu
sudo apt-get install php5-curl
is solving this issue. I think on another platform php5-curl will help too.
RESOLVED:
Got the same problem. Deleted the file composer.phar, installed again via curl -s https://getcomposer.org/installer | php - problem persists
/path/to/webroot/project/vendor/sensio/distribution-bundle/Sensio/Bundle/DistributionBundle/ScriptHandler.php file does not have the method defineDirectoryStructure() in it
symfony/framework-standard-edition (v2.6.1)
PHP 5.5.9-1ubuntu4.5 (cli) (built: Oct 29 2014 11:59:10)
problem here
sensio/distribution-bundle (v3.0.11)
Thanks #hap, this helped
sudo apt-get install php5-curl
Just had this problem on Debian. For me the problem was that sensio/distribution-bundle in its last version (v3.0.12, the one introducing the defineDirectoryStructure function) requires the cURL PHP extension, which was not installed, so it installed v3.0.11 (which don't contain the required method).
After installing php5-curl, Composer finaly installed the last version of sensio/distribution-bundle and everything was fine.
Got the same problem too ... Works on a debian distrib, but doesn't work on my wamp on windows 7 !
So tried to update my wamp, to get PHP5.5, reconfigure composer to use this PHP, still didn't work ..
Then I tried to launch the Console in Administrator mode, and launch :
"composer create-project symfony/framework-standard-edition sfproject/"
And guess what .... That finally worked !! With administrator rights ... Just give it a try ;)
I have same problem. I just added in composer.json string "symfony/symfony": "2.3.*", And its working for me.
Also, i deleted my composer.phar and composer.lock files.
The problem, if you have in your project symfony 2.3 it installing dependencies for v 2.7 .
I got this error from a install into a new vagrant VM, it would appear that something done recently has broken this as I managed to install a 2.6.0 version last week whilst testing, now it doesn't work.
After a bit of trial and error, it appears that the 2.6x and 2.5x branches are both affected and will not install, but 2.3x and 2.4x do install without the error.
incase anyone doesn't know how to install a specific version, just add it onto the end of the composer command, i.e.
composer create-project symfony/framework-standard-edition . 2.4.x
VM: Ubuntu 14.01 / PHP 5.5.9
I had the same problem in an Ubuntu 14.04 VM set up with PuPHPet and Vagrant/VirtualBox.
I've noticed that when I had the same problem, the DistributionBundle was severely out of date. Trying to upgrade it manually from composer.json (changing the version to 3.0.12, which was the las one available at the time I had the problem) produced a more verbose error, stating I hadn't installed php5-curl.
After updating the PuPHPet config file to include the cURL module for PHP and reprovisioning my VM, Symfony installed just fine, having installed the last version of Sensio Distribution Bundle, which contained the defineDirectoryStructure() method.
I was trying to move my Drupal site from my WAMP server to another computer's WAMP server and I followed all the necessary steps but I faced the error below. I tried updating but it didn't work.
Fatal error: Call to undefined function cache_get() in C:\wamp\www\try\includes\bootstrap.inc on line 901
I am using PostgreSQL and PhpPgAdmin. Any ideas?
See if Memcache is used in previous server.
If not see if some other cacheing mechanism like varnish cache is used
If none of the above:
When you type drush in the command line probably you reached the right place to solve you problem. This error arises when drush is not update and this occurs when you install drush from official repository in Ubuntu. The workaround is easy: just install a new version of drush! And to do so, you have to install from backported package of Ubuntu.