I'm new to the symfony2 and I was following http://symfony.com/doc/current/book/installation.html for installation using Composer now
It gives me a Fatal Error after some time:
monolog/monolog suggests installing rollbar/rollbar (Allow sending log messages to Rollbar)
Writing lock file
Generating autoload files
Fatal error: Call to undefined method Sensio\Bundle\DistributionBundle\Composer\ScriptHandler::defineDirectoryStructure() in /Users/app/SymfonyStandard/RootPackageInstallSubscriber.php on line 28
#hap absolutely right on Debian/Ubuntu
sudo apt-get install php5-curl
is solving this issue. I think on another platform php5-curl will help too.
RESOLVED:
Got the same problem. Deleted the file composer.phar, installed again via curl -s https://getcomposer.org/installer | php - problem persists
/path/to/webroot/project/vendor/sensio/distribution-bundle/Sensio/Bundle/DistributionBundle/ScriptHandler.php file does not have the method defineDirectoryStructure() in it
symfony/framework-standard-edition (v2.6.1)
PHP 5.5.9-1ubuntu4.5 (cli) (built: Oct 29 2014 11:59:10)
problem here
sensio/distribution-bundle (v3.0.11)
Thanks #hap, this helped
sudo apt-get install php5-curl
Just had this problem on Debian. For me the problem was that sensio/distribution-bundle in its last version (v3.0.12, the one introducing the defineDirectoryStructure function) requires the cURL PHP extension, which was not installed, so it installed v3.0.11 (which don't contain the required method).
After installing php5-curl, Composer finaly installed the last version of sensio/distribution-bundle and everything was fine.
Got the same problem too ... Works on a debian distrib, but doesn't work on my wamp on windows 7 !
So tried to update my wamp, to get PHP5.5, reconfigure composer to use this PHP, still didn't work ..
Then I tried to launch the Console in Administrator mode, and launch :
"composer create-project symfony/framework-standard-edition sfproject/"
And guess what .... That finally worked !! With administrator rights ... Just give it a try ;)
I have same problem. I just added in composer.json string "symfony/symfony": "2.3.*", And its working for me.
Also, i deleted my composer.phar and composer.lock files.
The problem, if you have in your project symfony 2.3 it installing dependencies for v 2.7 .
I got this error from a install into a new vagrant VM, it would appear that something done recently has broken this as I managed to install a 2.6.0 version last week whilst testing, now it doesn't work.
After a bit of trial and error, it appears that the 2.6x and 2.5x branches are both affected and will not install, but 2.3x and 2.4x do install without the error.
incase anyone doesn't know how to install a specific version, just add it onto the end of the composer command, i.e.
composer create-project symfony/framework-standard-edition . 2.4.x
VM: Ubuntu 14.01 / PHP 5.5.9
I had the same problem in an Ubuntu 14.04 VM set up with PuPHPet and Vagrant/VirtualBox.
I've noticed that when I had the same problem, the DistributionBundle was severely out of date. Trying to upgrade it manually from composer.json (changing the version to 3.0.12, which was the las one available at the time I had the problem) produced a more verbose error, stating I hadn't installed php5-curl.
After updating the PuPHPet config file to include the cURL module for PHP and reprovisioning my VM, Symfony installed just fine, having installed the last version of Sensio Distribution Bundle, which contained the defineDirectoryStructure() method.
Related
I am trying to create a custom gutenberg block to use in the wordpress gutenberg editor but when trying the command: npx #wordpress/create-block test-block it starts with installing a few things but all of a sudden I get:
npx: installed 126 in 13.341s
Unexpected token .
What is causing this?
I am following this tutorial: https://kinsta.com/blog/gutenberg-blocks/ except I am not using any of the hosting options from the tutorial since I have my own wordpress installation already running (locally).
Check your node version, I got the same error using node.js version 12, then I changed it to versi
For folks on Ubuntu: I ran into the same issue and found that the nodejs installable via apt is out of date. I had to download the tarfile from nodejs.org and install it with the help of How to install node.tar.xz file in linux. After that it ran as I expected.
(I tried the LTS version. node --version returns v18.12.0)
I also had this problem. All I needed to do was to update my Node version.
I followed these steps (run in Mac Terminal):
sudo npm cache clean -f
sudo npm install -g n
sudo n stable
Hope this helps.
It is a duplicate issue of this question
I have followed the instruction, but id did not solved the issue.
I have installed php8.0, php-xml, php8.0-xml and composer (using install script), then ran composer install successfuly.
On my webapp's root, there is a HTTP 500 error: Undefined constant "XML_PI_NODE"
You can see more log at http://1ib.re
I am on a Debian 10 Buster server.
Thank you for your help \o
sudo apt install php-xml
Hope it will solve you problem.
Didn't find solution.
Solved after reinstallation.
Trying a fresh install of Silverstripe 4.0.1 but only gets this far -
Installing SilverStripe...
I am now running through the installation steps (this should take about 30 seconds)
If you receive a fatal error, refresh this page to continue the installation
Setting up /var/www/duonsdev/public_html/index.php
Setting up /var/www/duonsdev/public_html/mysite/_config.php
Setting up /var/www/duonsdev/public_html/mysite/_config/theme.yml
Setting up /var/www/duonsdev/public_html/.env
Setting up /var/www/duonsdev/public_html/.htaccess
Building database schema...
ERROR [Emergency]: Uncaught TypeError: Return value of Symfony\Component\Filesystem\Filesystem::toIterable() must be an instance of Symfony\Component\Filesystem\iterable, array returned IN POST /install.php Line 729 in /var/www/duonsdev/public_html/vendor/symfony/filesystem/Filesystem.php Source ====== 720: } 721: 722
And the error goes on and on. I tried refresh, but same error.
If I try a dev/build instead then it always dies at the point of -
Index File_Versions.OwnerID: created as index ("OwnerID")
Website Error
There has been an error
The website server has not been able to respond to your request
Trying to setup on Ubuntu 16 on local dev machine running Apache virtual host.
Never had this problem before and setup fine with ss4.0.
Any ideas?
I ran into the same issue, and after checking in the official SilverStripe Community's slack channel, they mentioned this is because I was not running PHP 7.1.
Apparently, the official SilverStripe tarball offered in their website was built with PHP 7.1, so Composer added newer Symfony dependencies. They mentioned this would be fixed in newer releases.
Therefore, there are 2 ways you can fix this issue:
Download SilverStripe with Composer:
$ curl -sS https://getcomposer.org/installer | php
$ ./composer.phar create-project silverstripe/installer /var/www/duonsdev/public_html/
Update your PHP version to 7.1.
After doing any of those steps, you will be able to access the web wizard for installing SilverStripe.
NOTE: If you're on a shared hosting, you will need to download SilverStripe on your local machine (ensuring the PHP version matches, at least in the major version, e.g. 7.0), and upload the files that were generated to your public_html directory.
Make sure the module php version of apache in the same version as the cli php version.
Looks like the error was to do with the php version.
I was installing silverstripe through the cli using composer, but running a different version of php in apache.
So in the cli the php version was php 7.1
But in apache the php version was php 7.0.
After changing the apache php to match the cli (because silverstripe was installed using composer in the cli) it worked!
I want to install it.
drupal.org/project/social
But also ssh I get an error.
I installed Composer and Drush.
composer-creator of the project goalgorill / social_templat to: giant-master Dr --no-interaction
I get an error in the command enters the picture.
Composer is telling you exactly what is wrong:
the requested PHP extension bcmath is missing from your system
and how to fix it:
To enable extensions, verify that they are enabled in those ini files
Install and enable the bcmath extension. The exact process will depend on your operating system and how you installed PHP.
I have a little problem to setup Symfony 2 on Cloudcontrol,
I followed the instructions and installed a Symfony 2 framework, changed the document root and so on.
Now when I try to push the changes to server server, it loads the dependencies from the composer.json and then it failed with a message :
[RuntimeException]
Could not scan for classes inside "/srv/tmp/builddir/code/vendor/symfony/symfony/src/Symfony/Component/HttpFoundation/Resources/stubs" which does not appear to be a file nor a folder
This file is a vendor package, loaded from composer.
I have the same effect with a default composer.json file from a sample project (SF2)
Localy it works very well!
Can some one give me a hint ?
Got same error after setting "minimum-stability":"dev" and running composer update.
for unknown reason symfony/symfony (dev-master ...) kept failing to download from source thus was being loaded from cache.
what worked for me was a mix of previous answers:
$ rm -rf vendor/symfony
$ composer clearcache
$ composer install
Sometimes I had to clean composer cache to remove strange errors, usually it's in
/home/user/.composer/cache
You can also try to update composer with
php composer.phar self-update
I hope it runs for you.
I had the exact same error in my development directory.
What fixed it was :
$ rm -rf vendor/symfony
$ php composer.phar install
It reinstalled symfony/symfony, symfony/icu, symfony/assetic-bundle, symfony/monolog-bundle and symfony/swiftmailer-bundle and now everything works !