I have the following data as a list of POSIXct times that span one month. Each of them represent a bike delivery. My aim is to find the average amount of bike deliveries per ten-minute interval over a 24-hour period (producing a total of 144 rows). First all of the trips need to be summed and binned into an interval, then divided by the number of days. So far, I've managed to write a code that sums trips per 10-minute interval, but it produces incorrect values. I am not sure where it went wrong.
The data looks like this:
head(start_times)
[1] "2014-10-21 16:58:13 EST" "2014-10-07 10:14:22 EST" "2014-10-20 01:45:11 EST"
[4] "2014-10-17 08:16:17 EST" "2014-10-07 17:46:36 EST" "2014-10-28 17:32:34 EST"
length(start_times)
[1] 1747
The code looks like this:
library(lubridate)
library(dplyr)
tripduration <- floor(runif(1747) * 1000)
time_bucket <- start_times - minutes(minute(start_times) %% 10) - seconds(second(start_times))
df <- data.frame(tripduration, start_times, time_bucket)
summarized <- df %>%
group_by(time_bucket) %>%
summarize(trip_count = n())
summarized <- as.data.frame(summarized)
out_buckets <- data.frame(out_buckets = seq(as.POSIXlt("2014-10-01 00:00:00"), as.POSIXct("2014-10-31 23:0:00"), by = 600))
out <- left_join(out_buckets, summarized, by = c("out_buckets" = "time_bucket"))
out$trip_count[is.na(out$trip_count)] <- 0
head(out)
out_buckets trip_count
1 2014-10-01 00:00:00 0
2 2014-10-01 00:10:00 0
3 2014-10-01 00:20:00 0
4 2014-10-01 00:30:00 0
5 2014-10-01 00:40:00 0
6 2014-10-01 00:50:00 0
dim(out)
[1] 4459 2
test <- format(out$out_buckets,"%H:%M:%S")
test2 <- out$trip_count
test <- cbind(test, test2)
colnames(test)[1] <- "interval"
colnames(test)[2] <- "count"
test <- as.data.frame(test)
test$count <- as.numeric(test$count)
test <- aggregate(count~interval, test, sum)
head(test, n = 20)
interval count
1 00:00:00 32
2 00:10:00 33
3 00:20:00 32
4 00:30:00 31
5 00:40:00 34
6 00:50:00 34
7 01:00:00 31
8 01:10:00 33
9 01:20:00 39
10 01:30:00 41
11 01:40:00 36
12 01:50:00 31
13 02:00:00 33
14 02:10:00 34
15 02:20:00 32
16 02:30:00 32
17 02:40:00 36
18 02:50:00 32
19 03:00:00 34
20 03:10:00 39
but this is impossible because when I sum the counts
sum(test$count)
[1] 7494
I get 7494 whereas the number should be 1747
I'm not sure where I went wrong and how to simplify this code to get the same result.
I've done what I can, but I can't reproduce your issue without your data.
library(dplyr)
I created the full sequence of 10 minute blocks:
blocks.of.10mins <- data.frame(out_buckets=seq(as.POSIXct("2014/10/01 00:00"), by="10 mins", length.out=30*24*6))
Then split the start_times into the same bins. Note: I created a baseline time of midnight to force the blocks to align to 10 minute intervals. Removing this later is an exercise for the reader. I also changed one of your data points so that there was at least one example of multiple records in the same bin.
start_times <- as.POSIXct(c("2014-10-01 00:00:00", ## added
"2014-10-21 16:58:13",
"2014-10-07 10:14:22",
"2014-10-20 01:45:11",
"2014-10-17 08:16:17",
"2014-10-07 10:16:36", ## modified
"2014-10-28 17:32:34"))
trip_times <- data.frame(start_times) %>%
mutate(out_buckets = as.POSIXct(cut(start_times, breaks="10 mins")))
The start_times and all the 10 minute intervals can then be merged
trips_merged <- merge(trip_times, blocks.of.10mins, by="out_buckets", all=TRUE)
These can then be grouped by 10 minute block and counted
trips_merged %>% filter(!is.na(start_times)) %>%
group_by(out_buckets) %>%
summarise(trip_count=n())
Source: local data frame [6 x 2]
out_buckets trip_count
(time) (int)
1 2014-10-01 00:00:00 1
2 2014-10-07 10:10:00 2
3 2014-10-17 08:10:00 1
4 2014-10-20 01:40:00 1
5 2014-10-21 16:50:00 1
6 2014-10-28 17:30:00 1
Instead, if we only consider time, not date
trips_merged2 <- trips_merged
trips_merged2$out_buckets <- format(trips_merged2$out_buckets, "%H:%M:%S")
trips_merged2 %>% filter(!is.na(start_times)) %>%
group_by(out_buckets) %>%
summarise(trip_count=n())
Source: local data frame [6 x 2]
out_buckets trip_count
(chr) (int)
1 00:00:00 1
2 01:40:00 1
3 08:10:00 1
4 10:10:00 2
5 16:50:00 1
6 17:30:00 1
Related
I have a time series (xts) of rain gage data and I would like to be able to sum all the rain amounts between a beginning and end time point from a list. And then make a new data frame that is StormNumber and TotalRain over that time
> head(RainGage)
Rain_mm
2019-07-01 00:00:00 0
2019-07-01 00:15:00 0
2019-07-01 00:30:00 0
2019-07-01 00:45:00 0
2019-07-01 01:00:00 0
2019-07-01 01:15:00 0
head(StormTimes)
StormNumber RainStartTime RainEndTime
1 1 2019-07-21 20:00:00 2019-07-22 04:45:00
2 2 2019-07-22 11:30:00 2019-07-22 23:45:00
3 3 2019-07-11 09:15:00 2019-07-11 19:00:00
4 4 2019-05-29 17:00:00 2019-05-29 20:45:00
5 5 2019-06-27 14:30:00 2019-06-27 17:15:00
6 6 2019-07-11 06:15:00 2019-07-11 09:00:00
I have this code that I got from the SO community when I was trying to do something similar in the past (but extract data rather than sum it). However, I have no idea how it works so I am struggling to adapt it to this situation.
do.call(rbind, Map(function(x, y) RainGage[paste(x, y, sep="/")],
StormTimes$RainStartTime, StormTimes$RainEndTime)
In this case I would suggest just to write your own function and then use apply to achieve what you want, for example:
dates <- c('2019-07-01 00:00:00', '2019-07-01 00:15:00',
'2019-07-01 00:30:00', '2019-07-01 00:45:00',
'2019-07-01 01:00:00', '2019-07-01 01:15:00')
dates <- as.POSIXct(strptime(dates, '%Y-%m-%d %H:%M:%S'))
mm <- c(0, 10, 10, 20, 0, 0)
rain <- data.frame(dates, mm)
number <- c(1,2)
start <- c('2019-07-01 00:00:00','2019-07-01 00:18:00')
start <- as.POSIXct(strptime(start, '%Y-%m-%d %H:%M:%S'))
end <- c('2019-07-01 00:17:00','2019-07-01 01:20:00')
end <- as.POSIXct(strptime(end, '%Y-%m-%d %H:%M:%S'))
storms <- data.frame(number, start, end)
# Sum of rain
f = function(x, output) {
# Get storm number
number = x[1]
# Get starting moment
start = x[2]
# Get ending moment
end = x[3]
# Calculate sum
output <- sum(rain[rain$dates >= start & rain$dates < end, 'mm'])
}
# Apply function to each row of the dataframe
storms$rain <- apply(storms, 1, f)
print(storms)
This yields:
number start end rain
1 1 2019-07-01 00:00:00 2019-07-01 00:17:00 10
2 2 2019-07-01 00:18:00 2019-07-01 01:20:00 30
So a column rain in storms now holds the sum of rain$mm, which is what you're after.
Hope that helps you out!
I have this data.frame (12x2)called df_1 which represents monthly values :
month df_test
[1,] 1 -1.4408567
[2,] 2 -1.0007642
[3,] 3 2.1454113
[4,] 4 1.6935537
[5,] 5 0.1149219
[6,] 6 -1.3205144
[7,] 7 1.0277486
[8,] 8 1.0323482
[9,] 9 -0.1442319
[10,] 10 -0.2091197
[11,] 11 -0.6803158
[12,] 12 0.5965196
and this data.frame(8760x2) called df_2 where each rows represent a value associated to an interval of one hour of a day. This data.frame contains hourly values for one year:
time df_time
1 2015-01-01 00:00:00 -0.4035650
2 2015-01-01 01:00:00 0.1800579
3 2015-01-01 02:00:00 -0.3770589
4 2015-01-01 03:00:00 0.2573456
5 2015-01-01 04:00:00 1.2000178
6 2015-01-01 05:00:00 -0.4276127
...........................................
time df_time
8755 2015-12-31 18:00:00 1.3540119
8756 2015-12-31 19:00:00 0.4852843
8757 2015-12-31 20:00:00 -0.9194670
8758 2015-12-31 21:00:00 -1.0751814
8759 2015-12-31 22:00:00 1.0097749
8760 2015-12-31 23:00:00 -0.1032468
I want to obtain df_1 for each hour of each day. The problem is that all months do not have the same amount of days.
Finally we should obtain a data.frame called df_3 (8760x2) that has interpolated values between the values of df_1.
Thanks for help!
Here's done with zoo. I'm assuming that the monthly value is associated with a specific datetime stamp (middle of the month, midnight) - you have to do that. If you want a different datetime stamp, just change the value.
library(zoo)
library(dplyr)
library(tidyr)
df_3 <- df_1 %>%
mutate(time = paste(2015, month, "15 00:00:00", sep = "-"),
time = as.POSIXct(strptime(time, "%Y-%m-%d %H:%M:%S"))) %>%
full_join(df_2) %>%
arrange(time) %>%
mutate(df_test = na.approx(df_test, rule = 2))
I have a large dataset over many years which has several variables, but the one I am interested in is wind speed and dateTime. I want to find the time of the max wind speed for every day in the data set. I have hourly data in Posixct format, with WS as a numeric with occasional NAs. Below is a short data set that should hopefully illustrate my point, however my dateTime wasn't working out to be hourly data, but it provides enough for a sample.
dateTime <- seq(as.POSIXct("2011-01-01 00:00:00", tz = "GMT"),
as.POSIXct("2011-01-29 23:00:00", tz = "GMT"),
by = 60*24)
WS <- sample(0:20,1798,rep=TRUE)
WD <- sample(0:390,1798,rep=TRUE)
Temp <- sample(0:40,1798,rep=TRUE)
df <- data.frame(dateTime,WS,WD,Temp)
df$WS[WS>15] <- NA
I have previously tried creating a new column with just a posix date (minus time) to allow for day isolation, however all the things I have tried have only returned a shortened data frame with date and WS (aggregate, splitting, xts). Aggregate was only one that didn't do this, however, it gave me 23:00:00 as a constant time which isn't correct.
I have looked at How to calculate daily means, medians, from weather variables data collected hourly in R?, https://stats.stackexchange.com/questions/7268/how-to-aggregate-by-minute-data-for-a-week-into-hourly-means and others but none have answered this question, or the solutions have not returned an ideal result.
I need to compare the results of this analysis with another data frame, so hence the reason I need the actual time when the max wind speed occurred for each day in the dataset. I have a feeling there is a simple solution, however, this has me frustrated.
A dplyr solution may be:
library(dplyr)
df %>%
mutate(date = as.Date(dateTime)) %>%
left_join(
df %>%
mutate(date = as.Date(dateTime)) %>%
group_by(date) %>%
summarise(max_ws = max(WS, na.rm = TRUE)) %>%
ungroup(),
by = "date"
) %>%
select(-date)
# dateTime WS WD Temp max_ws
# 1 2011-01-01 00:00:00 NA 313 2 15
# 2 2011-01-01 00:24:00 7 376 1 15
# 3 2011-01-01 00:48:00 3 28 28 15
# 4 2011-01-01 01:12:00 15 262 24 15
# 5 2011-01-01 01:36:00 1 149 34 15
# 6 2011-01-01 02:00:00 4 319 33 15
# 7 2011-01-01 02:24:00 15 280 22 15
# 8 2011-01-01 02:48:00 NA 110 23 15
# 9 2011-01-01 03:12:00 12 93 15 15
# 10 2011-01-01 03:36:00 3 5 0 15
Dee asked for: "I want to find the time of the max wind speed for every day in the data set." Other answers have calculated the max(WS) for every day, but not at which hour that occured.
So I propose the following solution with dyplr:
library(dplyr)
set.seed(12345)
dateTime <- seq(as.POSIXct("2011-01-01 00:00:00", tz = "GMT"),
as.POSIXct("2011-01-29 23:00:00", tz = "GMT"),
by = 60*24)
WS <- sample(0:20,1738,rep=TRUE)
WD <- sample(0:390,1738,rep=TRUE)
Temp <- sample(0:40,1738,rep=TRUE)
df <- data.frame(dateTime,WS,WD,Temp)
df$WS[WS>15] <- NA
df %>%
group_by(Date = as.Date(dateTime)) %>%
mutate(Hour = hour(dateTime),
Hour_with_max_ws = Hour[which.max(WS)])
I want to highlight out, that if there are several hours with the same maximal windspeed (in the example below: 15), only the first hour with max(WS) will be shown as result, though the windspeed 15 was reached on that date at the hours 0, 3, 4, 21 and 22! So you might need a more specific logic.
For the sake of completeness (and because I like the concise code) here is a "one-liner" using data.table:
library(data.table)
setDT(df)[, max.ws := max(WS, na.rm = TRUE), by = as.IDate(dateTime)][]
dateTime WS WD Temp max.ws
1: 2011-01-01 00:00:00 NA 293 22 15
2: 2011-01-01 00:24:00 15 55 14 15
3: 2011-01-01 00:48:00 NA 186 24 15
4: 2011-01-01 01:12:00 4 300 22 15
5: 2011-01-01 01:36:00 0 120 36 15
---
1734: 2011-01-29 21:12:00 12 249 5 15
1735: 2011-01-29 21:36:00 9 282 21 15
1736: 2011-01-29 22:00:00 12 238 6 15
1737: 2011-01-29 22:24:00 10 127 21 15
1738: 2011-01-29 22:48:00 13 297 0 15
Consider this
time <- seq(ymd_hms("2014-02-24 23:00:00"), ymd_hms("2014-06-25 08:32:00"), by="hour")
group <- rep(LETTERS[1:20], each = length(time))
value <- sample(-10^3:10^3,length(time), replace=TRUE)
df2 <- data.frame(time,group,value)
str(df2)
> head(df2)
time group value
1 2014-02-24 23:00:00 A 246
2 2014-02-25 00:00:00 A -261
3 2014-02-25 01:00:00 A 628
4 2014-02-25 02:00:00 A 429
5 2014-02-25 03:00:00 A -49
6 2014-02-25 04:00:00 A -749
I would like to create a variable that contains, for each group, the rolling mean of value
over the last 5 days (not including the current observation)
only considering observations that fall at the exact same hour as the current observation.
In other words:
At time 2014-02-24 23:00:00, df2['rolling_mean_same_hour'] contains the mean of the values of value observed at 23:00:00 during the last 5 days in the data (not including 2014-02-24 of course).
I would like to do that in either dplyr or data.table. I confess having no ideas how to do that.
Any ideas?
Many thanks!
You can calculate the rollmean() with your data grouped by the group variable and hour of the time variable, normally the rollmean() will include the current observation, but you can use shift() function to exclude the current observation from the rollmean:
library(data.table); library(zoo)
setDT(df2)
df2[, .(rolling_mean_same_hour = shift(
rollmean(value, 5, na.pad = TRUE, align = 'right'),
n = 1,
type = 'lag'),
time), .(hour(time), group)]
# hour group rolling_mean_same_hour time
# 1: 23 A NA 2014-02-24 23:00:00
# 2: 23 A NA 2014-02-25 23:00:00
# 3: 23 A NA 2014-02-26 23:00:00
# 4: 23 A NA 2014-02-27 23:00:00
# 5: 23 A NA 2014-02-28 23:00:00
# ---
#57796: 22 T -267.0 2014-06-20 22:00:00
#57797: 22 T -389.6 2014-06-21 22:00:00
#57798: 22 T -311.6 2014-06-22 22:00:00
#57799: 22 T -260.0 2014-06-23 22:00:00
#57800: 22 T -26.8 2014-06-24 22:00:00
I have some data which is formatted in the following way:
time count
00:00 17
00:01 62
00:02 41
So I have from 00:00 to 23:59hours and with a counter per minute. I'd like to group the data in intervals of 15 minutes such that:
time count
00:00-00:15 148
00:16-00:30 284
I have tried to do it manually but this is exhausting so I am sure there has to be a function or sth to do it easily but I haven't figured out yet how to do it.
I'd really appreciate some help!!
Thank you very much!
For data that's in POSIXct format, you can use the cut function to create 15-minute groupings, and then aggregate by those groups. The code below shows how to do this in base R and with the dplyr and data.table packages.
First, create some fake data:
set.seed(4984)
dat = data.frame(time=seq(as.POSIXct("2016-05-01"), as.POSIXct("2016-05-01") + 60*99, by=60),
count=sample(1:50, 100, replace=TRUE))
Base R
cut the data into 15 minute groups:
dat$by15 = cut(dat$time, breaks="15 min")
time count by15
1 2016-05-01 00:00:00 22 2016-05-01 00:00:00
2 2016-05-01 00:01:00 11 2016-05-01 00:00:00
3 2016-05-01 00:02:00 31 2016-05-01 00:00:00
...
98 2016-05-01 01:37:00 20 2016-05-01 01:30:00
99 2016-05-01 01:38:00 29 2016-05-01 01:30:00
100 2016-05-01 01:39:00 37 2016-05-01 01:30:00
Now aggregate by the new grouping column, using sum as the aggregation function:
dat.summary = aggregate(count ~ by15, FUN=sum, data=dat)
by15 count
1 2016-05-01 00:00:00 312
2 2016-05-01 00:15:00 395
3 2016-05-01 00:30:00 341
4 2016-05-01 00:45:00 318
5 2016-05-01 01:00:00 349
6 2016-05-01 01:15:00 397
7 2016-05-01 01:30:00 341
dplyr
library(dplyr)
dat.summary = dat %>% group_by(by15=cut(time, "15 min")) %>%
summarise(count=sum(count))
data.table
library(data.table)
dat.summary = setDT(dat)[ , list(count=sum(count)), by=cut(time, "15 min")]
UPDATE: To answer the comment, for this case the end point of each grouping interval is as.POSIXct(as.character(dat$by15)) + 60*15 - 1. In other words, the endpoint of the grouping interval is 15 minutes minus one second from the start of the interval. We add 60*15 - 1 because POSIXct is denominated in seconds. The as.POSIXct(as.character(...)) is because cut returns a factor and this just converts it back to date-time so that we can do math on it.
If you want the end point to the nearest minute before the next interval (instead of the nearest second), you could to as.POSIXct(as.character(dat$by15)) + 60*14.
If you don't know the break interval, for example, because you chose the number of breaks and let R pick the interval, you could find the number of seconds to add by doing max(unique(diff(as.POSIXct(as.character(dat$by15))))) - 1.
The cut approach is handy but slow with large data frames. The following approach is approximately 1,000x faster than the cut approach (tested with 400k records.)
# Function: Truncate (floor) POSIXct to time interval (specified in seconds)
# Author: Stephen McDaniel # PowerTrip Analytics
# Date : 2017MAY
# Copyright: (C) 2017 by Freakalytics, LLC
# License: MIT
floor_datetime <- function(date_var, floor_seconds = 60,
origin = "1970-01-01") { # defaults to minute rounding
if(!is(date_var, "POSIXct")) stop("Please pass in a POSIXct variable")
if(is.na(date_var)) return(as.POSIXct(NA)) else {
return(as.POSIXct(floor(as.numeric(date_var) /
(floor_seconds))*(floor_seconds), origin = origin))
}
}
Sample output:
test <- data.frame(good = as.POSIXct(Sys.time()),
bad1 = as.Date(Sys.time()),
bad2 = as.POSIXct(NA))
test$good_15 <- floor_datetime(test$good, 15 * 60)
test$bad1_15 <- floor_datetime(test$bad1, 15 * 60)
Error in floor_datetime(test$bad, 15 * 60) :
Please pass in a POSIXct variable
test$bad2_15 <- floor_datetime(test$bad2, 15 * 60)
test
good bad1 bad2 good_15 bad2_15
1 2017-05-06 13:55:34.48 2017-05-06 <NA> 2007-05-06 13:45:00 <NA>
You can do it in one line by using trs function from FQOAT, just like:
df_15mins=trs(df, "15 mins")
Below is a repeatable example:
library(foqat)
head(aqi[,c(1,2)])
# Time NO
#1 2017-05-01 01:00:00 0.0376578
#2 2017-05-01 01:01:00 0.0341483
#3 2017-05-01 01:02:00 0.0310285
#4 2017-05-01 01:03:00 0.0357016
#5 2017-05-01 01:04:00 0.0337507
#6 2017-05-01 01:05:00 0.0238120
#mean
aqi_15mins=trs(aqi[,c(1,2)], "15 mins")
head(aqi_15mins)
# Time NO
#1 2017-05-01 01:00:00 0.02736549
#2 2017-05-01 01:15:00 0.03244958
#3 2017-05-01 01:30:00 0.03743626
#4 2017-05-01 01:45:00 0.02769419
#5 2017-05-01 02:00:00 0.02901817
#6 2017-05-01 02:15:00 0.03439455