I need to get a plane's center X, Y, Z, Cartesian coordinates. I have the plane's normal and its center point distance to origin.
I can place a point(s) anywhere and get the distance from it. I suppose that some kind of triangulation COULD be in order. Like placing three (or however many you need) points in some fashion to get a single point.
If your plane is given in the following form:
dot(x, n) = d
, then it's quite easy to get an x that lies on the plane. Assuming that n is a unit vector, then dot(n, n) = 1. So, dot(d * n, n) = d. So one point on the plane is d * n.
Related
visualization
I am searching the location of a point that lies on a plane. The relative location on the plane is given in u/v-Coordinates.
The normal vector n is equal to the vector from (0,0,0) to the center of the plane (or any other distance ≠ 0, if more convenient)
The plane has no rotation around the n vector - u is always on the xy axis and v on the z (up) axis
I feel like there should be a simple formula for this, given Vector3 n along with the coordinates u and v, but i'm stuck here.
You have the coordinates of the origin of the plane, namely (x, y, z)
Now we need the unit vectors u and v in global coordinates.
u is (y, -x, 0), normalized.
v is (-zx/r, -zy/r, r), normalized, where r=(x2+y2)1/2
Now you can add the location of the point in uv coordinates to the location of the plane origin in xyz coordinates.
I have three vectors a, b, c in cartesian coordinate system x, y, z. Vectors are expressed in 3*3 matrix form by their components on x, y, z coordinates.
Virtual cube is created from vectors a, b, c which starts at same point.
I want to calculate angle between a vector in x,y,z coordinate and a plane inside virtual cube.
Angle between line and plane is found if plane normal is known. But I can't get normal of plane inside a cube.
If you mean the plane that contains a, b, and c, then the plane's normal can be calculated with the cross product:
n = (b - a) x (c - a)
You may want to normalize this vector afterwards. Make sure that your angle calculation is orientation-invariant, i.e. take the absolute value of the dot product.
angle = acos(abs(dot(v, n)) / (norm(n) * norm(v))
i am scratching my head for some time now how to do this.
I have two defined vectors in 3d space. Say vector X at (0,0,0) and vector Y at (3,3,3). I will get a random point on a line between those two vectors. And around this point i want to form a circle ( some amount of points ) perpendicular to the line between the X and Y at given radius.
Hopefuly its clear what i am looking for. I have looked through many similar questions, but just cant figure it out based on those. Thanks for any help.
Edit:
(Couldnt put everything into comment so adding it here)
#WillyWonka
Hi, thanks for your reply, i had some moderate success with implementing your solution, but has some trouble with it. It works most of the time, except for specific scenarios when Y point would be at positions like (20,20,20). If it sits directly on any axis its fine.
But as soon as it gets into diagonal the distance between perpendicular point and origin gets smaller for some reason and at very specific diagonal positions it kinda flips the perpendicular points.
IMAGE
Here is the code for you to look at
public Vector3 X = new Vector3(0,0,0);
public Vector3 Y = new Vector3(0,0,20);
Vector3 A;
Vector3 B;
List<Vector3> points = new List<Vector3>();
void FindPerpendicular(Vector3 x, Vector3 y)
{
Vector3 direction = (x-y);
Vector3 normalized = (x-y).normalized;
float dotProduct1 = Vector3.Dot(normalized, Vector3.left);
float dotProduct2 = Vector3.Dot(normalized, Vector3.forward);
float dotProduct3 = Vector3.Dot(normalized, Vector3.up);
Vector3 dotVector = ((1.0f - Mathf.Abs(dotProduct1)) * Vector3.right) +
((1.0f - Mathf.Abs(dotProduct2)) * Vector3.forward) +
((1.0f - Mathf.Abs(dotProduct3)) * Vector3.up);
A = Vector3.Cross(normalized, dotVector.normalized);
B = Vector3.Cross(A, normalized);
}
What you want to do first is to find the two orthogonal basis vectors of the plane perpendicular to the line XY, passing through the point you choose.
You first need to find a vector which is perpendicular to XY. To do this:
Normalize the vector XY first
Dot XY with the X-axis
If this is very small (for numerical stability let's say < 0.1) then it must be parallel/anti-parallel to the X-axis. We choose the Y axis.
If not then we choose the X-axis
For whichever chosen axis, cross it with XY to get one of the basis vectors; cross this with XY again to get the second vector.
Normalize them (not strictly necessary but very useful)
You now have two basis vectors to calculate your circle coordinates, call them A and B. Call the point you chose P.
Then any point on the circle can be parametrically calculated by
Q(r, t) = P + r * (A * cos(t) + B * sin(t))
where t is an angle (between 0 and 2π), and r is the circle's radius.
I'm doing something where I have a plane in a coord sys A with a set of points already on it. I also have a normal vector in space N. How can I rotate the points on coord sys A so that the underlying plane will have the same normal direction as N?
Wondering if any one has a good idea on how to do this. Thanks
If you have, or can easily compute, the normal vector to the plane that your points are currently in, I think the easiest way to do this will be to rotate around the axis common to the two planes. Here's how I'd go about it:
Let M be the vector normal to your current plane, and N be the vector normal to the plane you want to rotate into. If M == N you can stop now and leave the original points unchanged.
Calculate the rotation angle as
costheta = dot(M,N)/(norm(M)*norm(N))
Calculate the rotation axis as
axis = unitcross(M, N)
where unitcross is a function that performs the cross product and normalizes it to a unit vector, i.e. unitcross(a, b) = cross(a, b) / norm(cross(a, b)). As user1318499 pointed out in a comment, this step can cause an error if M == N, unless your implementation of unitcross returns (0,0,0) when a == b.
Compute the rotation matrix from the axis and angle as
c = costheta
s = sqrt(1-c*c)
C = 1-c
rmat = matrix([ x*x*C+c x*y*C-z*s x*z*C+y*s ],
[ y*x*C+z*s y*y*C+c y*z*C-x*s ]
[ z*x*C-y*s z*y*C+x*s z*z*C+c ])
where x, y, and z are the components of axis. This formula is described on Wikipedia.
For each point, compute its corresponding point on the new plane as
newpoint = dot(rmat, point)
where the function dot performs matrix multiplication.
This is not unique, of course; as mentioned in peterk's answer, there are an infinite number of possible rotations you could make that would transform the plane normal to M into the plane normal to N. This corresponds to the fact that, after you take the steps described above, you can then rotate the plane around N, and your points will be in different places while staying in the same plane. (In other words, each rotation you can make that satisfies your conditions corresponds to doing the procedure described above followed by another rotation around N.) But if you don't care where in the plane your points wind up, I think this rotation around the common axis is the simplest way to just get the points into the plane you want them in.
If you don't have M, but you do have the coordinates of the points in your starting plane relative to an origin in that plane, you can compute the starting normal vector from two points' positions x1 and x2 as
M = cross(x1, x2)
(you can also use unitcross here but it doesn't make any difference). If you have the points' coordinates relative to an origin that is not in the plane, you can still do it, but you'll need three points' positions:
M = cross(x3-x1, x3-x2)
A single vector (your normal - N) will not be enough. You will need another two vectors for the other two dimensions. (Imagine that your 3D space could still rotate/spin around the normal vector, and you need another 2 vectors to nail it down). Once you have the normal and another one on the plane, the 3rd one should be easy to find (left- or right-handed depending on your system).
Make sure all three are normalized (length of 1) and put them in a matrix; use that matrix to transform any point in your 3D space (use matrix multiplication). This should give you the new coordinates.
I'm thinking make a unit vector [0,0,1] and use the dot-product along two planes to find the angle of difference, and shift all your points by those angles. This is assuming you want the z-axis to align with the normal vector, else just use [1,0,0] or [0,1,0] for x and y respectively.
I have a 3D Plane defined by two 3D Vectors:
P = a Point which lies on the Plane
N = The Plane's surface Normal
And I want to calculate any vector that lies on the plane.
Take any vector, v, not parallel to N, its vector cross product with N ( w1 = v x N ) is a vector that is parallel to the plane.
You can also take w2 = v - N (v.N)/(N.N) which is the projection of v into plane.
A point in the plane can then be given by x = P + a w, In fact all points in the plane can be expressed as
x = P + a w2 + b ( w2 x N )
So long as the v from which w2 is "suitable".. cant remember the exact conditions and too lazy to work it out ;)
If you want to determine if a point lies in the plane rather than find a point in the plane, you can use
x.N = P.N
for all x in the plane.
If N = (xn, yn, zn) and P = (xp, yp, zp), then the plane's equation is given by:
(x-xp, y-yp, z-zp) * (xn, yn, zn) = 0
where (x, y, z) is any point of the plane and * denotes the inner product.
And I want to calculate any vector
that lies on the plane.
If I understand correctly You need to check if point belongs to the plane?
http://en.wikipedia.org/wiki/Plane_%28geometry%29
You mast check if this equation: nx(x − x0) + ny(y − y0) + nz(z − z0) = 0 is true for your point.
where: [nx,ny,nz] is normal vector,[x0,y0,z0] is given point, [x,y,z] is point you are checking.
//edit
Now I'm understand Your question. You need two linearly independent vectors that are the planes base. Sow You need to fallow Michael Anderson answerer but you must add second vector and use combination of that vectors. More: http://en.wikipedia.org/wiki/Basis_%28linear_algebra%29