I have installed Talend Open Studio for Big Data 6.0.
When I try to open Local Project, I am getting
"Optional third party libraries(1) means you cannot configure the download location manually.
Also I am getting
Required third party libraries(341).
I am selecting both and clicked on Finish button and restarted. But, again and again I am getting same issue.
Please help.
You need to Select both the mentioned option and Select Install after completion Click on Finish tab. It will work.
Related
I want to install PyCharm, PhpStorm, etc. into some folder on drive D.
Though JetBrains Toolbox not having the option to do so in my view.
So the question is that is it possible to customize the installation folder for JetBrains IDEs when installing via Toolbox?
Yes, you can configure the install location for apps in the Toolbox settings. However, this will install ALL apps under the specified directory (and move existing ones there). If you want to define a specific install location for each IDE, then that is not possible... yet.
Also see this support question. The second answer explains how you can manually update the install_location property in .settings.json. This will change the install location for future installations, and your existing apps will not be moved.
[Windows 10] I found a manual location changing option that is not well explained on any forum.
After you install Jetbrains Toolbox, if you cannot change the Tool install location from the app UI, and it goes into "Failing to change location, because application is in use, or something like that" if you are trying to change from there, close the Toolbox application(kill it from Task manager, or close it from the toolbar), and after you go to the default installation location of the Toolbox app(more info about this, here: https://toolbox-support.jetbrains.com/hc/en-us/articles/115000978804-Where-are-the-IDEs-located-on-my-hard-drive-) and open .settings.json file
In the .settings.json file you need to add/update the following code line:
"install_location": "<default_location>",
There, add your desired install location instead of <default_location> if there exists the line in the file. If this line does not exist, add it the begining of the file. Don't forget to add the " , " in the end of the line.
Please help to spread this message to our fellow friends who are using Jetbrains Toolbox and are having this problem.
The location of the setting in the UI seems to change with subsequent Toolbox versions.
Currently it's under Toolbox > cogwheel icon > Toolbox App Setting > Tools > Tools install location.
Toolbox operates under current user permissions, not as administrator and it cannot ask for privileged access yet. In partical term it means if you wan't to install it under "C:\Program Files" you will have create "JetBrains", or whatever root directory you want, manually there, in your preferred file manager, then apply permission settings allowing you current user to write to that directory.
Looks like they invested some time in this. No need to play around with config files anymore:
Open your toolbox application
Open settings.
Open tab "Tools"
Change "tools install location"
Hit "apply changes"
Wait until files are moved
I cannot get VS 2015 to create my EDMX file for an Oracle Connection.
I am using Visual Studio 2015 Update 3
I have installed the Oracle Developer Tools 12.1.0.2.4
I have installed Oracle Data Access and the following DLLs exist under \ client[user]\product\12.1.0\client\odp.net\bin
2.x\Oracle.DataAccess.dll version: 2.121.2.0 ODAC Release 4
4\Oracle.DataAccess.dll version: 4.121.2.0 ODAC Release 4
I am using the following assemblies
Oracle.ManagedDataAccess Version: 4.122.1.0
Oracle.ManagedDataAccess.EntityFramework Version: 6.122.1.0
* I believe both of these are version 12.2.1100 based on the folders in which they reside in the packages folder.
There are no connections defined in the Server Explorer
My steps are as follows:
Within the Solutions Explorer, Right click on project and select "Add" | "New Item..."
Select Data | ADO.NET Entity Data Model | Add
Select EF Designer from Database | Press Next
In the Entity Data Model Wizard:
Press New Connection... (I get an warning "Failed to find the default tnsnames.ora file." I ignore and press "OK"
With the Datasource as "Oracle Database (ODP.NET, Managed Driver)" I enter the credentials and specify the the other
connection parameters and press "Test Connection" which SUCCEEDS.
I press OK and am taken to the next page in the Entity Data Model Wizard
I include sensitive data in connection string and Press Next....
WIZARD SHUTS DOWN (crashes) - NO EDMX CREATED
Any assistance in helping me troubleshoot this would be greatly appreciated.
TIA - Xavier
Thanks to #Hong-vit pointing me in the right direction. I found the answer.
When you visit the download page for ODAC you're given a selection of version numbers.
In my case the top two were:
ODAC 12.2c Release 1 and Oracle Developer Tools for Visual Studio (12.2.0.1.0)
ODAC 12c Release 4 and Oracle Developer Tools for Visual Studio (12.1.0.2.4)
For me the top one wouldn't install. It would cut out during the installation process (thanks Oracle!) so I settled with the second one (12.1.0.2.4).
This meant that when I installed Oracle.ManagedDataAccess and Oracle.ManagedDataAccess.EntityFramework I had to select the correct version.
Not for me:
The one I needed
As you can see the version numbers (almost!) match up:
ODAC 12.2.0.1.0 = Oracle.ManagedDataAccess 12.2.1100
ODAC 12.1.0.2.4 = Oracle.ManagedDataAccess 12.1.24160719 (yay!)
I believe this is a failing on oracles behalf as it's not made clear despite their inclusion on a page long readme on which this doesn't feature. In additon the version numbers not quite being the same...but that's a rant for the blog.
I have the same bug. I fixed it successfully by follow this step:
On your project Right click -> Select Manage NuGet packages on Browse tab input oracle. You will see Oracle.ManagedDataAccess.EntityFramework. Select version of oracle you have installed. This should be 12.1.2400. Install it, you are done
I had the same issue - I hope I can help fellow Googlers having the unfortunate task of connecting Oracle and Visual Studio.
I followed the steps and still got crashes - because I was using VS2017 (I understand that the questions is tagged VS2015). You'll need to install the VS2017 ODAC Client. Thankfully, this one actually does something when you begin the installation. The installer in the link on the accepted answer will only work for VS2015.
The most recent version (as of this time of writing) of ODP.NET is 18.3, which can be installed through NuGet (Oracle.ManagedDataAccess.EntityFramework). Follow these steps on Oracle's website and you'll be setup.
...Or so you think. I got the same error as in this stack overflow question, where it won't go past the Entity Data Model Wizard.
I applied every configuration in the selected answer, but it still wouldn't work. When I downgraded my Oracle.ManagedDataAccess.EntityFramework from 18.3.0 to 12.2.1100, I could finally create my models!
I have had the same problem when I was trying to connect Oracle Entity Framework with Visual Studio 2017.
After install and unistall several times differents version. The build that better works for me is:
Oracle Developer Tools for Visual Studio 2017 (ODTv2017) v12.2.1200
Oracle.ManagedDataAccess v12.2.1100
Oracle.ManagedDataAccess.EntityFramework v12.2.20190115
EntityFramework .NET v6.3.0
I think that having similar versions in Oracle packages is very important for good performance.
It looks like someone here had similar issue: He add to change implementation somehow.
[in this ]case a View (valid and worked) caused the crashes. After changing the implementation without using that view it worked (more or less).
What I advise is you proceed step by step, only importing one object for the first time you test the wizard, then only simple table, then add procedures, views...
Just recently uninstalled VS2017 RC and installed VS2017 RTM.
We have a Windows Service solution which includes a Setup project.
When I build this in Visual Studio 2017, somehow it's triggering something in the installer for Visual Studio 2013 (which we're still using), as I get this popup appearing:
It's fairly reproducible, but I have no idea where to start with this one.
Any ideas how to stop it happening?
It didn't happen before with the release candidate.
EDIT:
So, several VS2017 updates later, this problem had got a lot worse, as it was stopping me building the setup project completely. Previously I was able to click cancel as in my first screenshot, but at VS2017 v15.3.3, it wouldn't cancel, and if I let it run, it hung at:
So this forced my hand somewhat. I've accepted #PhilDW's answer as he led me straight to the main clue, but I'll also add an answer of my own with more detail.
As in PhilDW's answer, I checked the event log, and found this:
Detection of product '{9C593464-7F2F-37B3-89F8-7E894E3B09EA}', feature
'Visual_Studio_Professional_x86_enu', component
'{E3FF99AA-78B9-4A06-8A74-869E9F65E1FE}' failed. The resource
'C:\Windows\Microsoft.NET\Framework\URTInstallPath_GAC\' does not
exist.
A little Googling, and I found this MSDN blog entry:
Workaround
We are consistently seeing this issue caused by a missing directory,
C:\Windows\Microsoft.NET\Framework\URTInstall_GAC (or
%SystemRoot%\Microsoft.NET\Framework\URTInstall_GAC).
To work around this issue,
Open an elevated command prompt.
Type: mkdir %SystemRoot%\Microsoft.NET\Framework\URTInstall_GAC
Note that the folder name isn't the same as in my case. I didn't notice this initially, and creating the folder didn't cure the problem.
However when I created the actuall folder referenced by the event log message, the problem went away, and I can now build my setup project without messages about VS2013.
It's a repair of Visual Studio 2013 because Windows thinks the install is broken (registry entries or files not as in the original VS 2013 install). If you look in the Windows Event log, Application, there should be some MsiInstaller log entries that tell you the product (by ProductCode guid) and the broken component (by component guid and file or registry name). This might help identify what's going on, but not necessarily have a clue to a fix. If it's a setup project it might be a conflict with mergemodule Dlls or prerequisites, some of which come from the current SDK.
You don't say if you're letting the repair complete, in the case that it's just an isolated occurrence.
I'm working with SQLite and Windows 10.
I followed this video SQLite Local Database (28th minute) to find the package and .sqlite file. But when I entered AppData/Local/Packages, I didn't find any package has the same name as my project's package's name.
Can anyone help me find the package folder of windows 10 app project? Thank a lot!
Try following steps:
WIN menu -> all apps -> right click on your app (App1 in your case) -> click uninstall. This will clear the previous app data.
In Visual Studio, right click on the project node -> Deploy.
Try to find and run your app from the app list to make sure it deployed correctly. then check if you can find the folder. This time you can easily find the folder by sorting on modified date.
If it still doesn't work, see if you can repro the issue with a new blank project.
[Update]
If the app locates on phone or phone emulator, Use Windows Phone Power Tools (works for windows 10) to browse folders. Here is a screenshot for your reference:
Hello I am trying to bind my work space and I have been doing that with edit work space option and when I bind it for the first time, it had been giving message that if I want to download all the files from the server but I do not see that option from my home computer.
How can I download the latest files from the server, once I have bound my workspace with the server?
Open up the Source Control Explorer (from Team Explorer). Select your workspace from the workspace drop-down in the toolbar. Right click the project in Source Control Explorer and choose Get Latest Version, or Get Specific Version.