I posted this question on another website but no one was able to help me there until a user suggested I posted this question here. So...
My SSD has some trouble POSTING on my old GA-P35-DS3 motherboard if I try to use the Intel controller.
Apparently (after much googling) I found this is a bug on the BIOS that can be fixed by some quick editing of the MBR. The trouble is, I have no idea how I can go about doing this. I tried 010 Editor and HxD but I'm completely overwhelmed and, although I am able to open the disk, I can't find that particular "offset" (0x1C3).
If you are curious this post describes my issue (scenario 1) and the required steps to fix it: http://forum.giga-byte.co.uk/index.php?topic=8585.0
So, if someone could help me figure what an "offset" is and how I can find it with 010 Editor (or any other program you see fit) so I could fix these byes I would very much appreciate it! :)
EDIT: I've been looking around and I'm a bit confused if I should change these bytes:
http://i.imgur.com/Ys0gU3O.png
Or these bytes:
j59ypS5.png (I need more rep to post the second like so you can just copy-paste this into the imgur URL)
Judging by its content the first option doesn't seem to make sense. But since the second option is only "00 00 00" for I don't know if it makes any sense either...
If someone could please help me I'd be forever grateful.
Well.. I was able to figure it out by myself so I'll leave the answer here in case someone faces the same issue in the future.
1) I was opening a logical drive instead of a physical unit. That's why what I was seeing wasn't meeting my expectations.
2) I thought the "offset" was only referenced by the column by the left but no. Ox1C3 actually includes the column number as well. So I had to change the three bytes including 0x1C3 (0x1C4 and 0x1C5).
That was pretty much it. After that I saved the changes and rebooted my machine and after changing the SATA port everything was working as expected.
Related
I don't know if it is possible, but I have a Jupyter notebook where I'd like to disable some cells in case of a whole run.
That is, 'Run All' would jump over these cells and not trigger them, but they could still be used if ran alone (e.g. with Ctrl+Enter) without changing the code.
I know %%script false --no-raise-error does the trick, but you need to manually change a constant to re-enable the cells when you need them. Ideally, I'd not have to change anything in the code.
Thanks in advance!
Your question resembles another question on here that I've answered recently. It's not the same question but I think my solution to that one actually works better for you. Here's the link to it and I hope it helps: https://stackoverflow.com/a/73978254/16264178
(PS I previously just copy-pasted my answer to the other question to here and that got flagged by a moderator. He was right that that wasn't best practice (answering different questions with the same answer verbatim). The recommendation though was to flag this thread as a duplicate of the other, which it isn't really. They're similar questions but my suggestion was a fairly imperfect solution to the other query, whereas I think it applies very well to the question in this thread. That's why I reposted my answer here with a link to the other one. That was the best thing I could see to do but people should feel free to enlighten me if they know better)
I have a question in my textbook which says to write an arduino code by means of which an IRSensor can be used to identify black and white colors. I have searched everywhere on the net and have not found a solution. Can someone help me in this code?
Thanks
I found these links in my first google search:
- http://forum.arduino.cc/index.php?topic=143767.0
- http://www.instructables.com/id/Multi-Function-Automatic-Move-Smart-Car-for-Arduin/step11/Black-or-white-line-detection-principle/
These should help you get started in thinking about how to code for this but also leaves room for you to think about the right answer on your own. If you need help with the actual coding part, edit your question with your code and whatever errors you are having trouble with.
a client of ours was messing around with the admin side of nopcommerce, and she found a lot of the data seems to have tripled. After lot's of searching around, I can't seem to find anyone who has had a similar issue.
One thing I noticed when initially looking at this, was that there were 3 languages (all English). Removing 2 of these didn't give any errors, but also didn't help with the tripled data. Up until now, that was my best guess as to what could be going wrong.
Has anyone else experienced anything like this, or have a greater knowledge of nopCommerce that might have an idea what is going wrong?
Any help would be greatly appreciated!
Thanks!
http://i.imgur.com/G4hsIDV.png
http://i.imgur.com/lF43PDm.png
Problem you installed this nopcommerce, using the wizard, many times. When you did that some records are duplacaded, because the wizard doesn`t treat it.
I've the same problem and o solve that removing it directly in database...
Folks,
Environment: Ubuntu 12.04 minimal + openbox.
In our C-based application, the information can be displayed only on approved display devices. We rely on EDID to get the information for the connected display device.
Everything works as expected. However, occasionally EDID returns us some garbled characters. For example, SAMSUNG may come out as SAMSyNG.
The programming logic to obtain EDID information is straightforward. It makes me feel that EDID itself is not as reliable. I am wondering if anyone else has faced such a problem and what you have done programmatically to overcome the problem.
Thank you in advance for sharing your thoughts.
Regards,Peter
Please take a look at this:
It says 'Found 6 results in 3 files', but how can I see which files are those and the exact line, you know the usual way.
I've haven't set any options or settings anywhere, its just all default settings.
This is making me crazy!
Thanks everyone for taking interest in it, but I think I found the answer. Its as dumb as the question.
There is another field to filter the result at bottom and when I cleaned it I got everything back to normal :)
Hope this saves somebody hours.