I have a path issue. I can't seem to figure out why I am getting this code 23 error. Here is the complete error message: I am guessing that rsync cant write to my local /private/tmp directory.
Here is the output:
```
Do you really want to continue? (y/n): y
rsync: link_stat "/tmp/SGDU55.sql" failed: No such file or directory (2)
rsync error: some files could not be transferred (code 23) at /SourceCache/rsync/rsync-42/rsync/main.c(1400) [receiver=2.6.9]
Could not rsync from xxx#staging-5244.prod.xxx.com:/tmp/SGDU55.sql to [error]
/private/tmp/-to-drupal_db.sql.p0YIBu
```
Here is the drush simulate command abbreviated output.
```
$ drush sql-sync #aq6 #aqsolo --simulate
.....
Calling system(rsync -e 'ssh -i /Users/dave.ferrera/.vagrant.d/insecure_private_key' -akz --exclude=".git" --exclude=".gitignore" --exclude=".hg" --exclude=".hgignore" --exclude=".hgrags" --exclude=".bzr" --exclude=".bzrignore" --exclude=".bzrtags" --exclude=".svn" /private/tmp/-to-drupal_db.sql.iXOzSo vagrant#12.12.12.12:tmp/drupal_db.sql);
Calling system(ssh -i /Users/dave.ferrera/.vagrant.d/insecure_private_key vagrant#12.12.12.12 'mysql --database=drupal_db --host=localhost --user=root --password=password --silent < tmp/drupal_db.sql 2>&1');
$
```
Is there a way change the /private/tmp path to something else?
I have added chmod 1777 to /private and /private/tmp
Since I was using Acquia the problem seemed to be solved as soon as I changed to the correct %dum-dir path.
so now I have:
'%dump-dir' => '/mnt/tmp/',
If you alias root is beginning with 'root' => '/mnt/gfs..... than it should be the same.
Related
I am in root directory, i am creating a script that will take me from root > Home > Logs and inside logs delete 3 log files.
Script will check if they exist, if YES it will delete it.
I am facing some syntax problems if you could help.
Thanks
My code:
#!/bin/sh
cd Home/Log
if [ -e error1.log ]
then
rm error1
fi
if [ -e error2.log ]
then
rm error1
fi
if [ -e error3.log ]
then
rm error1
fi
when i execute the file in root using ./delete here is what is am getting as errors:
$ ./delete
: No such file or directoryme/Log
./delete: line 14: syntax error near unexpected token `fi'
I am in root directory
When writing a script, it's almost always better not to assume things like that. If you know where the files are and it's not important that they're somewhere relative to what happens to be your current working directory, just name them.
Here are three ways you could accomplish what you want safely.
#!/bin/sh
dir=/Home/Log
rm -f ${dir}/error1.log ${dir}/error2.log ${dir}/error2.log
or
#!/bin/sh
dir=/Home/Log
rm -f ${dir}/error{1,2,3}.log
or
#!/bin/sh
set -e
cd /Home/Log && rm -f error1.log error2.log error2.log
For anything nontrivial, set -e is your friend. In your example, nothing happens later in the script. What you don't want is to keep going thinking you've changed directories, but haven't, and wind up scribbling somewhere you didn't intend. Many have lost much that way.
I have a similar configuration with other project, and It run good. But, this project get problem:
Fatal error: Uncaught UnexpectedValueException: The stream or file "/home/docker/test-project/var/logs/prod.log" could not be opened: failed to open stream: Permission denied in /home/docker/test-project/vendor/monolog/monolog/src/Monolog/Handler/StreamHandler.php:107 Stack trace: #0 /home/docker/test-project/vendor/monolog/monolog/src/Monolog/Handler/AbstractProcessingHandler.php(37): Monolog\Handler\StreamHandler->write(Array) #1 /home/docker/test-project/vendor/monolog/monolog/src/Monolog/Handler/FingersCrossedHandler.php(122): Monolog\Handler\AbstractProcessingHandler->handle(Array) #2 /home/docker/test-project/vendor/monolog/monolog/src/Monolog/Logger.php(336): Monolog\Handler\FingersCrossedHandler->handle(Array) #3 /home/docker/test-project/vendor/monolog/monolog/src/Monolog/Logger.php(643): Monolog\Logger->addRecord(500, 'Uncaught PHP Ex...', Array) #4 /home/docker/test-project/vendor/symfony/symfony/src/Symfony/Component/HttpKernel/EventListener/ExceptionListener.php(89): Monolog\Logger->critical('Uncaught PHP Ex. in /home/docker/test-project/vendor/monolog/monolog/src/Monolog/Handler/StreamHandler.php on line 107
I tried: http://symfony.com/doc/current/setup/file_permissions.html and I don't get a good result
Since you have a nginx tag, maybe you are also using nginx as the web server, if so, you might need to do some configuration there:
http://symfony.com/doc/current/setup/web_server_configuration.html#nginx
Your question and setup should be described in your question. If you can edit and update, that would be good.
There is log file permission problem. Docker has not support setfacl with default filesystem driver.
Try this solution as described in symfony documentation:
change the umask so that the cache and log directories are group-writable or world-writable (depending if the web server user and the command line user are in the same group or not). To achieve this, put the following line at the beginning of the bin/console, web/app.php and web/app_dev.php files:
umask(0000); // This will let the permissions be 0777
The solution was to run this command into project directory:
$ HTTPDUSER=`ps axo user,comm | grep -E '[a]pache|[h]ttpd|[_]www|[w]ww-data|[n]ginx' | grep -v root | head -1 | cut -d\ -f1`
I tried to build binaries in RHEL6 using rpmbuild command.It throws file not found error during rpmbuild command execution. But In RHEL5 the same rpmbuild command is working fine.
RHEL5 execution result:
*Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.77266
umask 022
cd /usr/src/redhat/BUILD
LANG=C
export LANG
unset DISPLAY*
RHEL6 execution result:
*Executing(%install): /bin/sh -e /var/tmp/rpm-tmp.BeMhyH
umask 022
cd //rpmbuild/BUILD
'[' //rpmbuild/BUILDROOT/ '!=' / ']'
rm -rf //rpmbuild/BUILDROOT/
++ dirname //rpmbuild/BUILDROOT/
mkdir -p //rpmbuild/BUILDROOT
mkdir //rpmbuild/BUILDROOT/
LANG=C
export LANG
unset DISPLAY
/usr/lib/rpm/check-buildroot*
I am not able to find any %install changes between the spec files. Any one please help me to understand what am i doing wrong?
Thanks in Advance..!
The only problem that is clear from the snippets provided is that $HOME is not defined in your rpmbuild environment. $HOME/rpmbuild is the default build root for 'rpmbuild' in RHEL6, instead of /usr/src/redhat as in RHEL5.
Things to consider:
Is there an '~/.rpmmacros' file that is altering the rpmbuild
directives.
The temporary %install script will not be deleted on
error-exit. Inspecting it directly might tell you more about why it failed.
Ex:
[user#host rpmbuild]$ rpmbuild -bb nano
<snip>
+ exit 1
error: Bad exit status from /var/tmp/rpm-tmp.2uw1tZ (%install)
RPM build errors:
Bad exit status from /var/tmp/rpm-tmp.2uw1tZ (%install)
[user#host rpmbuild]$ cat /var/tmp/rpm-tmp.2uw1tZ
#!/bin/sh
RPM_SOURCE_DIR="/home/user/rpmbuild/SOURCES"
RPM_BUILD_DIR="/home/user/rpmbuild/BUILD"
...
Older recommendations were to nuke the target buildroot as the first step of %install. To help force a separation between the %build and %install steps, newer versions of rpmbuild strictly enforce it by doing it for you for the first step, as shown in what you pasted in.
I am assuming that your %build stage is putting one or more files into the target buildroot area, which it shouldn't be doing. It should all be in the build area only.
I would like to automate a build - for now, during my development, so no security stuff involved.
I have created a script that moves libs to /usr/local/lib and issues ldd command.
These things require sudo.
Running the script from the builder (Qt Creator), I am not prompted to enter my sudo password, and I get the error
sudo: no tty present and no askpass program specified
Sorry, try again.
I have found a few solutions to this but it just did not work... what am I missing ?
Exact code:
in myLib.pro
#temporary to make my life easier
QMAKE_POST_LINK = /home/me/move_libs_script
in move_libs_script:
#!/bin/bash
sudo cp $HOME/myLib/myLib.so.1 /usr/local/lib/
sudo ldconfig
I did as suggested by the answer above: edited visudo and added the script... even added qmake...
sudo visudo
added at the end:
me ALL=NOPASSWD: /home/me/move_libs_script, /usr/bin/qmake-qt4
It saved file: /etc/sudoers.tmp (and doing the command sudo visudo again I saw that my changes were kept so I am not sure what is with the tmp)
Still same errors
sudo: no tty present and no askpass program specified
Sorry, try again.
sudo: no tty present and no askpass program specified
Sorry, try again.
sudo: no tty present and no askpass program specified
Sorry, try again.
sudo: 3 incorrect password attempts
sudo: no tty present and no askpass program specified
Sorry, try again.
sudo: no tty present and no askpass program specified
Sorry, try again.
sudo: no tty present and no askpass program specified
Sorry, try again.
sudo: 3 incorrect password attempts
Edit: after asking the question I found a suggested similar question:
https://stackoverflow.com/a/10668693/1217150
So I tried to add a custom step...
Result:
09:50:03: Running build steps for project myLib...
09:50:03: Could not start process "ssh-askpass Sudo Password | sudo -S bash ./move_libs_script"
Error while building project myLib (target: Desktop)
When executing build step 'Custom Process Step'
(if I run from terminal I get asked for password)
New edit: so I thought I can outsmart the system and call a script that calls my script...
myLib.pro
QMAKE_POST_LINK = /home/me/sudo_move_libs_script
sudo_move_libs_script:
#!/bin/bash
ssh-askpass Sudo Password | sudo -S bash $HOME/move_libs_script
got it !!! I will post as answer i guess
New edit as answer to comment:
in mainExe.pro:
QMAKE_POST_LINK = ./link_lib
in link_lib:
#!/bin/sh
LD_LIBRARY_PATH=$HOME/myLib
export LD_LIBRARY_PATH
Result: Executable fails because the lib is not to be found (of course before testing I emoved the copy from /usr/local/lib)
Solution 1:
To run the command I needed with sudo from Qt, and be asked for password
myLib.pro
QMAKE_POST_LINK = /home/me/sudo_move_libs_script
sudo_move_libs_script:
#!/bin/bash
ssh-askpass Sudo Password | sudo -S bash $HOME/move_libs_script
move_libs_script:
#!/bin/bash
cp $HOME/myLib/myLib.so.1 /usr/local/lib/
ldconfig
Solution 2
Avoid using sudo: run a custom executable from Qt Creator (just like I would when project is deployed) - I can execute my program with correct dependency. Unfortunately it does not work for debug.
In the Run Configuration, place a script "dummy_executable" instead the app executable:
dummy_executable:
#!/bin/sh
LD_LIBRARY_PATH=$HOME/myLib
export LD_LIBRARY_PATH
$HOME/myExec/myExec "$#
This method is great for running the program ... unfortunately gdb fails... I think it tries to debug the shell script ? So it won't work if I try to step through my program.
Choosing Solution 1, because it has advantages: allows me to build and debug the program, which is what I really need, and with the dependencies set I get the library built before running the program - which is perfect.
Thank you Etan Reisner
I couldn't find existing posts related to my issue. On a Digital Ocean Droplet, mup setup went fine, but when I try to deploy, I get the following error. Any ideas? Thanks!
root#ts:~/ts-deploy# mup deploy
Meteor Up: Production Quality Meteor Deployments
Building Started: /root/TS/
Bundling Error: code=137, error:
-------------------STDOUT-------------------
Figuring out the best package versions to use. This may take a moment.
-------------------STDERR-------------------
bash: line 1: 31217 Killed meteor build --directory /tmp/dc37af3e-eca0-4a19-bf1a-d6d38bb8f517
Below are the logs. node -v indicates I am using 0.10.31. How do I check which script is exiting with the error? Any other ideas? Thanks!
error: Forever detected script exited with code: 1
error: Script restart attempt #106
Meteor requires Node v0.10.29 or later.
error: Forever detected script exited with code: 1
error: Script restart attempt #107
Meteor requires Node v0.10.29 or later.
error: Forever detected script exited with code: 1
error: Script restart attempt #108
stepping down to gid: meteoruser
stepping down to uid: meteoruser
After I went back to an old backup of the DO Droplet, and re-ran mup setup and mup deploy, I now get this in the command line output
Building Started: /root/TS
Bundling Error: code=134, error:
-------------------STDOUT-------------------
Figuring out the best package versions to use. This may take a moment.
-------------------STDERR-------------------
FATAL ERROR: JS Allocation failed - process out of memory
bash: line 1: 1724 Aborted (core dumped) meteor build --directory /tmp/bfdbcb45-9c61-435f-9875-3fb304358996
and this in the logs:
>> stepping down to gid: meteoruser
>> stepping down to uid: meteoruser
Exception while invoking method 'login' TypeError: Cannot read property '0' of undefined
at ServiceConfiguration.configurations.remove.service (app/server/accounts.js:7:26)
at Object.Accounts.insertUserDoc (packages/accounts-base/accounts_server.js:1024)
at Object.Accounts.updateOrCreateUserFromExternalService (packages/accounts-base/accounts_server.js:1189)
at Package (packages/accounts-oauth/oauth_server.js:45)
at packages/accounts-base/accounts_server.js:383
at tryLoginMethod (packages/accounts-base/accounts_server.js:186)
at runLoginHandlers (packages/accounts-base/accounts_server.js:380)
at Meteor.methods.login (packages/accounts-base/accounts_server.js:434)
at maybeAuditArgumentChecks (packages/ddp/livedata_server.js:1594)
at packages/ddp/livedata_server.js:648
Exception while invoking method 'login' TypeError: Cannot read property '0' of undefined
at ServiceConfiguration.configurations.remove.service (app/server/accounts.js:7:26)
at Object.Accounts.insertUserDoc (packages/accounts-base/accounts_server.js:1024)
at Object.Accounts.updateOrCreateUserFromExternalService (packages/accounts-base/accounts_server.js:1189)
at Package (packages/accounts-oauth/oauth_server.js:45)
at packages/accounts-base/accounts_server.js:383
at tryLoginMethod (packages/accounts-base/accounts_server.js:186)
at runLoginHandlers (packages/accounts-base/accounts_server.js:380)
at Meteor.methods.login (packages/accounts-base/accounts_server.js:434)
at maybeAuditArgumentChecks (packages/ddp/livedata_server.js:1594)
at packages/ddp/livedata_server.js:648
The memory issue stems from using DigitalOcean's $5 Droplet. To solve the problem, I added swap to the server, as explained in detail below.
Create and enable the swap file using the dd command :
sudo dd if=/dev/zero of=/swapfile bs=1024 count=256k
“of=/swapfile” designates the file’s name. In this case the name is swapfile.
Next prepare the swap file by creating a linux swap area:
sudo mkswap /swapfile
The results display:
Setting up swapspace version 1, size = 262140 KiB
no label, UUID=103c4545-5fc5-47f3-a8b3-dfbdb64fd7eb
Finish up by activating the swap file:
sudo swapon /swapfile
You will then be able to see the new swap file when you view the swap summary.
swapon -s
Filename Type Size Used Priority
/swapfile file 262140 0 -1
This file will last on the virtual private server until the machine reboots. You can ensure that the swap is permanent by adding it to the fstab file.
Open up the file:
sudo nano /etc/fstab
Paste in the following line:
/swapfile none swap sw 0 0
Swappiness in the file should be set to 10. Skipping this step may cause both poor performance, whereas setting it to 10 will cause swap to act as an emergency buffer, preventing out-of-memory crashes.
You can do this with the following commands:
echo 10 | sudo tee /proc/sys/vm/swappiness
echo vm.swappiness = 10 | sudo tee -a /etc/sysctl.conf
To prevent the file from being world-readable, you should set up the correct permissions on the swap file:
sudo chown root:root /swapfile
sudo chmod 0600 /swapfile
This only worked for me by increasing the swap space to 1gb:
Make all swap off
sudo swapoff -a
Resize the swapfile
sudo dd if=/dev/zero of=/swapfile bs=1M count=1024
Make swapfile usable
sudo mkswap /swapfile
Make swapon again
sudo swapon /swapfile