i'm comparing different measures of distance and similarity for vector profiles (Subtest results) in R, most of them are easy to compute and/or exist in dist().
Unfortunately, one that might be interesting and is to difficult for me to calculate myself is Cattel's Rp. I can not find it in R.
Does anybody know if this exists already?
Or can you help me to write a function?
The formula (Cattell 1994) of Rp is this:
(2k-d^2)/(2k + d^2)
where:
k is the median for chi square on a sample of size n;
d is the sum of the (weighted=m) difference between the two profiles,
sth like: sum(m(x(i)-y(i)));
one thing i don't know is, how to get the chi square median in there
Thank you
What i get without defining the k is:
Rp.Cattell <- function(x,y){z <- (2k-(sum(x-y))^2)/(2k+(sum(x-y))^2);return(z)}
Vector examples are:
x <- c(-1.2357,-1.1999,-1.4727,-0.3915,-0.2547,-0.4758)
y <- c(0.7785,0.9357,0.7165,-0.6067,-0.4668,-0.5925)
They are measures by the same device, but related to different bodyparts. They don't need to be standartised or weighted, i would say.
This page gives a general formula for k, and then gives a more thorough method using SAS/IML which pretty much gives the same results. So I used the general formula, added calculation of degrees of freedom, which leads to this:
Rp.Cattell <- function(x,y) {
dof <- (2-1) * (length(y)-1)
k <- (1-2/(9*dof))^3
z <- (2*k-sum(sum(x-y))^2)/(2*k+sum(sum(x-y))^2)
return(z)
}
x <- c(-1.2357,-1.1999,-1.4727,-0.3915,-0.2547,-0.4758)
y <- c(0.7785,0.9357,0.7165,-0.6067,-0.4668,-0.5925)
Rp.Cattell(x, y)
# [1] -0.9012083
Does this figure appear to make sense?
Trying to verify the function, I found out now that the median of chisquare is the chisquare value for 50% probability - relating to random. So the function should be:
Rp.Cattell <- function(x,y){
dof <- (2-1) * (length(y)-1)
k <- qchisq(.50, df=dof)
z <- (2k-(sum(x-y))^2)/(2k+(sum(x-y))^2);
return(z)}
It is necessary though to standardize the Values before, so the results are distributed correctly.
So:
library ("stringr")
# they are centered already
x <- as.vector(scale(c(-1.2357,-1.1999,-1.4727,-0.3915,-0.2547,-0.4758),center=F, scale=T))
y <- as.vector(scale(c(0.7785,0.9357,0.7165,-0.6067,-0.4668,-0.5925),center=F, scale=T))
Rp.Cattell(x, y) -0.584423
This sounds reasonable now - or not?
I consider calculation of z is incorrect.
You need to calculate the sum of the squared differences. Not the square of the sum of differences. Besides product operator is missing in 2k.
It should be
z <- (2*k-sum((x-y)^2))/(2*k+sum((x-y)^2))
Do you agree?
I am working with the cumulative emergence of flies over time (taken at irregular intervals) over many summers (though first I am just trying to make one year work). The cumulative emergence follows a sigmoid pattern and I want to create a maximum likelihood estimation of a 3-parameter Weibull cumulative distribution function. The three-parameter models I've been trying to use in the fitdistrplus package keep giving me an error. I think this must have something to do with how my data is structured, but I cannot figure it out. Obviously I want it to read each point as an x (degree days) and a y (emergence) value, but it seems to be unable to read two columns. The main error I'm getting says "Non-numeric argument to mathematical function" or (with slightly different code) "data must be a numeric vector of length greater than 1". Below is my code including added columns in the df_dd_em dataframe for cumulative emergence and percent emergence in case that is useful.
degree_days <- c(998.08,1039.66,1111.29,1165.89,1236.53,1293.71,
1347.66,1387.76,1445.47,1493.44,1553.23,1601.97,
1670.28,1737.29,1791.94,1849.20,1920.91,1967.25,
2036.64,2091.85,2152.89,2199.13,2199.13,2263.09,
2297.94,2352.39,2384.03,2442.44,2541.28,2663.90,
2707.36,2773.82,2816.39,2863.94)
emergence <- c(0,0,0,1,1,0,2,3,17,10,0,0,0,2,0,3,0,0,1,5,0,0,0,0,
0,0,0,0,1,0,0,0,0,0)
cum_em <- cumsum(emergence)
df_dd_em <- data.frame (degree_days, emergence, cum_em)
df_dd_em$percent <- ave(df_dd_em$emergence, FUN = function(df_dd_em) 100*(df_dd_em)/46)
df_dd_em$cum_per <- ave(df_dd_em$cum_em, FUN = function(df_dd_em) 100*(df_dd_em)/46)
x <- pweibull(df_dd_em[c(1,3)],shape=5)
dframe2.mle <- fitdist(x, "weibull",method='mle')
Here's my best guess at what you're after:
Set up data:
dd <- data.frame(degree_days=c(998.08,1039.66,1111.29,1165.89,1236.53,1293.71,
1347.66,1387.76,1445.47,1493.44,1553.23,1601.97,
1670.28,1737.29,1791.94,1849.20,1920.91,1967.25,
2036.64,2091.85,2152.89,2199.13,2199.13,2263.09,
2297.94,2352.39,2384.03,2442.44,2541.28,2663.90,
2707.36,2773.82,2816.39,2863.94),
emergence=c(0,0,0,1,1,0,2,3,17,10,0,0,0,2,0,3,0,0,1,5,0,0,0,0,
0,0,0,0,1,0,0,0,0,0))
dd <- transform(dd,cum_em=cumsum(emergence))
We're actually going to fit to an "interval-censored" distribution (i.e. probability of emergence between successive degree day observations: this version assumes that the first observation refers to observations before the first degree-day observation, you could change it to refer to observations after the last observation).
library(bbmle)
## y*log(p) allowing for 0/0 occurrences:
y_log_p <- function(y,p) ifelse(y==0 & p==0,0,y*log(p))
NLLfun <- function(scale,shape,x=dd$degree_days,y=dd$emergence) {
prob <- pmax(diff(pweibull(c(-Inf,x), ## or (c(x,Inf))
shape=shape,scale=scale)),1e-6)
## multinomial probability
-sum(y_log_p(y,prob))
}
library(bbmle)
I should probably have used something more systematic like the method of moments (i.e. matching the mean and variance of a Weibull distribution with the mean and variance of the data), but I just hacked around a bit to find plausible starting values:
## preliminary look (method of moments would be better)
scvec <- 10^(seq(0,4,length=101))
plot(scvec,sapply(scvec,NLLfun,shape=1))
It's important to use parscale to let R know that the parameters are on very different scales:
startvals <- list(scale=1000,shape=1)
m1 <- mle2(NLLfun,start=startvals,
control=list(parscale=unlist(startvals)))
Now try with a three-parameter Weibull (as originally requested) -- requires only a slight modification of what we already have:
library(FAdist)
NLLfun2 <- function(scale,shape,thres,
x=dd$degree_days,y=dd$emergence) {
prob <- pmax(diff(pweibull3(c(-Inf,x),shape=shape,scale=scale,thres)),
1e-6)
## multinomial probability
-sum(y_log_p(y,prob))
}
startvals2 <- list(scale=1000,shape=1,thres=100)
m2 <- mle2(NLLfun2,start=startvals2,
control=list(parscale=unlist(startvals2)))
Looks like the three-parameter fit is much better:
library(emdbook)
AICtab(m1,m2)
## dAIC df
## m2 0.0 3
## m1 21.7 2
And here's the graphical summary:
with(dd,plot(cum_em~degree_days,cex=3))
with(as.list(coef(m1)),curve(sum(dd$emergence)*
pweibull(x,shape=shape,scale=scale),col=2,
add=TRUE))
with(as.list(coef(m2)),curve(sum(dd$emergence)*
pweibull3(x,shape=shape,
scale=scale,thres=thres),col=4,
add=TRUE))
(could also do this more elegantly with ggplot2 ...)
These don't seem like spectacularly good fits, but they're sane. (You could in principle do a chi-squared goodness-of-fit test based on the expected number of emergences per interval, and accounting for the fact that you've fitted a three-parameter model, although the values might be a bit low ...)
Confidence intervals on the fit are a bit of a nuisance; your choices are (1) bootstrapping; (2) parametric bootstrapping (resample parameters assuming a multivariate normal distribution of the data); (3) delta method.
Using bbmle::mle2 makes it easy to do things like get profile confidence intervals:
confint(m1)
## 2.5 % 97.5 %
## scale 1576.685652 1777.437283
## shape 4.223867 6.318481
dd <- data.frame(degree_days=c(998.08,1039.66,1111.29,1165.89,1236.53,1293.71,
1347.66,1387.76,1445.47,1493.44,1553.23,1601.97,
1670.28,1737.29,1791.94,1849.20,1920.91,1967.25,
2036.64,2091.85,2152.89,2199.13,2199.13,2263.09,
2297.94,2352.39,2384.03,2442.44,2541.28,2663.90,
2707.36,2773.82,2816.39,2863.94),
emergence=c(0,0,0,1,1,0,2,3,17,10,0,0,0,2,0,3,0,0,1,5,0,0,0,0,
0,0,0,0,1,0,0,0,0,0))
dd$cum_em <- cumsum(dd$emergence)
dd$percent <- ave(dd$emergence, FUN = function(dd) 100*(dd)/46)
dd$cum_per <- ave(dd$cum_em, FUN = function(dd) 100*(dd)/46)
dd <- transform(dd)
#start 3 parameter model
library(FAdist)
## y*log(p) allowing for 0/0 occurrences:
y_log_p <- function(y,p) ifelse(y==0 & p==0,0,y*log(p))
NLLfun2 <- function(scale,shape,thres,
x=dd$degree_days,y=dd$percent) {
prob <- pmax(diff(pweibull3(c(-Inf,x),shape=shape,scale=scale,thres)),
1e-6)
## multinomial probability
-sum(y_log_p(y,prob))
}
startvals2 <- list(scale=1000,shape=1,thres=100)
m2 <- mle2(NLLfun2,start=startvals2,
control=list(parscale=unlist(startvals2)))
summary(m2)
#graphical summary
windows(5,5)
with(dd,plot(cum_per~degree_days,cex=3))
with(as.list(coef(m2)),curve(sum(dd$percent)*
pweibull3(x,shape=shape,
scale=scale,thres=thres),col=4,
add=TRUE))
In the following code I use bootstrapping to calculate the C.I. and the p-value under the null hypothesis that two different fertilizers applied to tomato plants have no effect in plants yields (and the alternative being that the "improved" fertilizer is better). The first random sample (x) comes from plants where a standard fertilizer has been used, while an "improved" one has been used in the plants where the second sample (y) comes from.
x <- c(11.4,25.3,29.9,16.5,21.1)
y <- c(23.7,26.6,28.5,14.2,17.9,24.3)
total <- c(x,y)
library(boot)
diff <- function(x,i) mean(x[i[6:11]]) - mean(x[i[1:5]])
b <- boot(total, diff, R = 10000)
ci <- boot.ci(b)
p.value <- sum(b$t>=b$t0)/b$R
What I don't like about the code above is that resampling is done as if there was only one sample of 11 values (separating the first 5 as belonging to sample x leaving the rest to sample y).
Could you show me how this code should be modified in order to draw resamples of size 5 with replacement from the first sample and separate resamples of size 6 from the second sample, so that bootstrap resampling would mimic the “separate samples” design that produced the original data?
EDIT2 :
Hack deleted as it was a wrong solution. Instead one has to use the argument strata of the boot function :
total <- c(x,y)
id <- as.factor(c(rep("x",length(x)),rep("y",length(y))))
b <- boot(total, diff, strata=id, R = 10000)
...
Be aware you're not going to get even close to a correct estimate of your p.value :
x <- c(1.4,2.3,2.9,1.5,1.1)
y <- c(23.7,26.6,28.5,14.2,17.9,24.3)
total <- c(x,y)
b <- boot(total, diff, strata=id, R = 10000)
ci <- boot.ci(b)
p.value <- sum(b$t>=b$t0)/b$R
> p.value
[1] 0.5162
How would you explain a p-value of 0.51 for two samples where all values of the second are higher than the highest value of the first?
The above code is fine to get a -biased- estimate of the confidence interval, but the significance testing about the difference should be done by permutation over the complete dataset.
Following John, I think the appropriate way to use bootstrap to test if the sums of these two different populations are significantly different is as follows:
x <- c(1.4,2.3,2.9,1.5,1.1)
y <- c(23.7,26.6,28.5,14.2,17.9,24.3)
b_x <- boot(x, sum, R = 10000)
b_y <- boot(y, sum, R = 10000)
z<-(b_x$t0-b_y$t0)/sqrt(var(b_x$t[,1])+var(b_y$t[,1]))
pnorm(z)
So we can clearly reject the null that they are the same population. I may have missed a degree of freedom adjustment, I am not sure how bootstrapping works in that regard, but such an adjustment will not change your results drastically.
While the actual soil beds could be considered a stratified variable in some instances this is not one of them. You only have the one manipulation, between the groups of plants. Therefore, your null hypothesis is that they really do come from the exact same population. Treating the items as if they're from a single set of 11 samples is the correct way to bootstrap in this case.
If you have two plots, and in each plot tried the different fertilizers over different seasons in a counterbalanced fashion then the plots would be statified samples and you'd want to treat them as such. But that isn't the case here.