As per documentation, there are APIs to access Companyhome, userHome objects etc. but there is none for guesthome object access.
Please share if there is an alternate way to access guesthome.
Thanks in advance.
companyhome.childByNamePath("Guest Home");
Related
Is there a way in Phabricator to restrict which users can create a new project?
I have looke everywhere but cannot find the policy that will restrict this feature to select users.
Logon to Phabricator as administrator
Go to [1]: https://phabricator-URL/applications/view/PhabricatorProjectApplication/
The you should see this and config the policies:
https://i.stack.imgur.com/1crpW.png
Turns out I did not look hard enough.
This is possible by setting an entry in policy.locked through the command line:
./bin/config set policy.locked "{ \"project.create\" : \"admin\" }"
I'll be using swift as like S3, where it will host number of files for my site.
I've set my container as public, and so
Here is the URL for a file.
https://provider/v1/auth_1293kdfj/folder/file.mp4
There are two problems:
Is it correct in using above format uri in public setting? It feels kinda dangerous because it has the auth_bit.
If I visit https://provider/v1/auth_1293kdfj/folder/ it lists all files/bojects in container folder. I wish to turn this off, how would I do so? Should I make my container private and assign temp url to ALL objects?
Thanks for your help!
1 - Yes. It's correct. Probably your authentication server is protected behind a firewall. This is just the project id. However if you are really worried about security you can configure your webserver to hide this info.
2 - Probably your container has the following acl:
.r:*,.rlistings
If you set by yourself (what I believe is the most common) you should change it just to:
.r:*
I have created a custom federated authenticator in WSO2-APIM/IS and have enable Just-In-Time Provisioning.
Since in API Manager when an application is created a corresponding service provider will be created as well. I want to have all service provider be using my custom authenticator as default which, I think, can be done by editing the file repository\conf\identity\identity-providers\default.xml
However I can not find the information in the documentation on the format of this file which I need to configure my custom federated authenticator and enable JIT Provisioning. Can anyone please guide me to the configuration detail of this file.
Below is the default repository\conf\identity\identity-providers\default.xml
<IdentityProvider>
<IdentityProviderName>default</IdentityProviderName>
<DisplayName>default</DisplayName>
<IdentityProviderDescription></IdentityProviderDescription>
<Alias></Alias>
<IsPrimary></IsPrimary>
<IsFederationHub></IsFederationHub>
<HomeRealmId></HomeRealmId>
<ProvisioningRole></ProvisioningRole>
<FederatedAuthenticatorConfigs></FederatedAuthenticatorConfigs>
<DefaultAuthenticatorConfig>
</DefaultAuthenticatorConfig>
<ProvisioningConnectorConfigs>
<!--<ProvisioningConnectorConfig>
<ProvisioningProperties>
</ProvisioningProperties>
</ProvisioningConnectorConfig>-->
</ProvisioningConnectorConfigs>
<!--<DefaultProvisioningConnectorConfig></DefaultProvisioningConnectorConfig>-->
<ClaimConfig></ClaimConfig>
<Certificate></Certificate>
<PermissionAndRoleConfig></PermissionAndRoleConfig>
<JustInTimeProvisioningConfig></JustInTimeProvisioningConfig>
</IdentityProvider>
Thank you very much in advanced.
As per the code here, It should be in the following format.
<JustInTimeProvisioningConfig>
<UserStoreClaimUri></UserStoreClaimUri>
<ProvisioningUserStore>PRIMARY</ProvisioningUserStore>
<IsProvisioningEnabled>true</ProvisioningEnabled>
</JustInTimeProvisioningConfig>
Change the ProvisioningUserStore to reflect yours.
I am trying to write a Google Voice app and was wondering if anyone knew the url and post parameters to make a call using the direct access number instead of the ring-back.
For example, to call 1-800-555-0111, enter
https://voice.google.com/u/0/calls?a=nc,%2B18005550111
I did not test it, but check this api: http://code.google.com/p/google-voice-java/
Specially, the voice.java at line 711, which is the method:
public String call(String originNumber, String destinationNumber,
String phoneType) throws IOException {
In line 737 they use:
URL callURL = new URL("https://www.google.com/voice/call/connect/");
and the full comments for the methods say:
// POST /voice/call/connect/
// outgoingNumber=[number to call]
// &forwardingNumber=[forwarding number]
// &subscriberNumber=undefined
// &phoneType=[phone type from google]
// &remember=0
// &_rnr_se=[pull from page]
I hope this helps.
I don't think there is an official API, but this site seems to have made some progress with the URLs you are after: http://posttopic.com/topic/google-voice-add-on-development , and there is an unofficial API here: http://sourceforge.net/projects/gvoicedotnet/
Google Voice does not expose an API to the service however, there are many 3rd party libraries that mock an API by screen scraping via Google Voice's HTML website. I better solution though is to use the google voice service via SIP. Search for "google voice sip asterisk" and you will find out about this. Basically if you install this software called asterisk it can make calls via google voice.
See this article for a start:
http://eggie5.com/10-installing-asterisk-on-osx
I have an error...
The container specified in the connection string does not exist
Basically, I am using Active Directory authentication in ASP.NET.
I have set up my connection string.
I am still very new to AD.
I appritate any help
thanks
You'll probably be better off specifying the root NC name in your connection.
LDAP://YourADServer/DC=cene,DC=edc,DC=CompName,DC=com
Unless there is a good reason why you don't want searches to be done domain-wide, I'd set it up like that.
You can try ldp.exe to connect to the AD server you have specified in the path and see if that works
One thing you might want to be aware of is that Active Directory and Forms Authentication are not the same thing. You will use one or the other to Authenticate and Authorize.
I think your LDAP string should be formatted thus:
"LDAP://DCServer.BUSINESSPLUSPLUS.com/CN=Users,DC=BUSINESSPLUSPLUS,DC=com"