i was trying to build "brackets sprint 40" from source code (by following #jasonsanjose instructions look #4816 and the official wiki's page here) in my 32bit Wheezy, Using CEF3 (Verion 3.1547.1406_linux32_release with glibc 2.13) and everything was OK .
when i ran grunt build and grunt installer the output was: Running "build" task
Running "build-linux" task
Done, without errors.
and when i installed .deb package and executed it in the terminal , this error has been thrown:brackets: libcef_dll/wrapper/libcef_dll_wrapper.cc:120: int CefExecuteProcess(const CefMainArgs&, CefRefPtr): Assertion `false' failed.
Aborted
I did rebuild it many times, but the problem persist.
And this is where i stopped, i don't know where the problem lies.
some help will be appreciated, thank you in advance.
There's a duplicate of this question with longer discussion posted here - https://github.com/adobe/brackets/issues/8170.
Note: This problem shouldn't affect a "vanilla" brackets-shell build on Linux -- it's specific to a hack some people have developed to support an older version of Debian than Brackets officially supports. This requires swapping in a newer version of the CEF library, which is not always easy to do since they are not usually backwards-compatible.
Related
I installed Scilab 5.5.2 on Windows 10, and then installed the Scilab Code Generator toolbox.
However, when I start Scilab, the following message appears and I can't use the toolbox. This problem occurs for every toolbox.
Start Scilab Code Generator
Version: 0.9.20190122
Load macros
atomsLoad: An error occurred while loading 'xcos_code_generator-0.9.20190122':
File "C:\Users\光\AppData\Roaming\Scilab\SCILAB~1.2\atoms\x64\XCOS_C~1\09E129~1.201\macros\names" does not exist or read access denied.
(光 is my username.)
I suppose the problem comes from "\Scilab\SCILAB~1.2" in the middle of the file path. In my computer, the only folder in "Scilab" is "scilab-5.5.2", so indeed the software cannot find the file it's looking for.
Does anyone have any ideas?
I need to use the toolbox at work soon, so any help is greatly appreciated. Thank you in advance.
Note: I'm not using the latest Scilab 6.0.2 because it fails to work on my computer. It closes immediately after I open it.
I solved the problem by myself.
It was my user name "光" that caused the problem. I found people saying that user names in full-width characters such as Japanese sometimes cause problems like this.
The solution is to create another user account with a name in half-width characters and install Scilab in that account. (Just changing the full-width user name doesn't work because it doesn't change the filenames that already exist.)
I couldn't find the solution until today because I was searching for solutions only in the context of Scilab, not in the context of software in general.
I hope this answer helps someone.
I'm not sure why you are using an outdated version of Scilab. The latest version is 6.0.2 on Windows. If the newer version doesn't work properly then that's the problem you need to fix first. To test your Scilab installation you may run it in the terminal. Find the installation folder. For me, it is C:\Program Files\scilab-6.0.2\bin the on cmd go to the path and run Scilex.exe. If not uninstall everything and install it in a proper way. My recommendation is to uninstall the old Scilab you already have. Then:
Install Chocolatey package manager
Open PowerShell as Admin and run choco update all -y, once in a while update your packages this way.
run choco install Scilab -y
then open the Scilab software
run the atomsInstall("xcos_code_generator") in the console
runt the atomsLoad("xcos_code_generator") to make sure your package is installed properly. You should see this as a result:
--> atomsInstall("xcos_code_generator")
Scanning repository http://atoms.scilab.org/6.0 ... Done
ans =
!xcos_code_generator 0.9.201901 user SCIHOME\atoms\x64\xcos_code_generator\0.9.201901 I !
--> atomsLoad("xcos_code_generator");
Start Scilab Code Generator
Version: 0.9.20190122
Load macros
Load help
Load demos
Question Summary
I'm trying to use Elixir in jupyter notebook but IElixir doesn't work.
Does somebody know how to solve below error & use Elixir in jupyter notebook?
Environments
OS Ubuntu ver.“18.04.3 LTS (Bionic Beaver)”
CPU Intel Core i7-7700HQ 2.80GHz
RAM 16GB
GPU NVIDIA GeForce GTX 1600 Mobile
Version Information
anaconda 4.7.12
jupyter 1.0.0
elixir 1.9.4
What I did & stacking points
I refer to IElixir github comments to built a deverop environment.
https://github.com/pprzetacznik/IElixir
Progressed Situation
Repository clone (done)
git clone https://github.com/pprzetacznik/IElixir.git
cd IElixir
Built IElixir (Stacking Point)
mix deps.get
mix test
MIX_ENV=prod mix compile
Error was happen in mix test
kojiro#Inspiron7577:~/IElixir$ mix test
===> Compiling esqlite
===> Compiling /home/kojiro/IElixir/deps/esqlite/c_src/esqlite3_nif.c
===> /home/kojiro/IElixir/deps/esqlite/c_src/esqlite3_nif.c:25:10: fatal error: sqlite3.h: ãã®ãããªãã¡ã¤ã«ã ãã£ã¬ã¯ããªã¯ããã¾ãã #include “sqlite3.h” ^~~~~~~~~~~ compilation terminated.
** (Mix) Could not compile dependency :esqlite, “/home/kojiro/.mix/rebar3 bare compile --paths=”/home/kojiro/IElixir/_build/test/lib/*/ebin"" command failed. You can recompile this dependency with “mix deps.compile esqlite”, update it with “mix deps.update esqlite” or clean it with “mix deps.clean esqlite”
first time, I thought error caused by esqlite could not compile in Mix.
so I tried all of error commented command but error doesn't solved.
What I did to solve this error
I follow to IElixir github comment.
use mix local.rebar --force
add ~/.mix/ to PATH then try mix test again.
(base) kojiro#Inspiron7577:~/IElixir$ export PATH="$PATH:~/.mix/"
but error doensn't solved.
I already tried to search "Could not compile dependency :esqlite" but all environmentl situation is different.
Does someone know how to solve this situation?
I am not familiar with this problem, however I found some resources that might help you get Elixir working in jupyter (if ever you didn't already found them !) :
This medium post take you step by step through the installation, and also mention that is a Docker image that exists for it.
you can also find an installation tutorial with Docker here (different from the above mentioned one)
Hope it helps.
Typescript compilation task works fine on linux machines but on a mac fails with the following not particularly useful error message and what looks like a binary dump.
$ grunt
Running "ts:build" (ts) task
Compiling...
Fast compile will not work when --out is specified. Ignoring fast compilation
Using tsc v1.4.1
������������=��AF���=����
>> Error: tsc return code: 3
Warning: Task "ts:build" failed. Use --force to continue.
Aborted due to warnings.
Im using nvm with node v0.11.4 and rvm with ruby v2.2.0.
Any ideas how to fix this, or even debug?
As the question includes debugging, here are some pointers which might help determine where the problem is.
Try compiling from the command line with tsc alone (no grunt), in case the problem is with grunt or the ts:build task (looks like grunt-ts).
Maybe one of your source files is causing the tools to crash (perhaps they can't cope with a file's encoding?). If a single, simple file will compile, then try removing subsets of your source from the build. If some of those files are causing the crash (whether valid TypeScript or not) you may be able to find a temporary workaround.
Try compiling with different versions of tsc. If you need 1.4.1 features you could try using the latest from https://github.com/Microsoft/TypeScript (see here for how to do this with grunt-ts).
The problem was with a malfunctioning node installation. I upgraded to node 0.12 which fixed the problem.
Just to check the problem wasn't node 0.11.4 specific I removed all previous versions of node and reinstalled 0.11.4 and the error no longer occurs.
I took these steps after removing all node modules, clearing the cache and reinstalling with no luck. I also tried using multiple typescript compiler versions.
I followed all the step is mention in given below url to build my project( I am using win7 OS).
https://github.com/adobe/brackets-shell/wiki/Building-brackets-shell.
actullly i want to create brackets installer (installed wix 3.7).
but i am getting cef-extract failed error.
even though i also used grunt cef-extract --force.
after that its throunging new error.
create -project failed after that i am not able to process further.
can some one help me.
thanks in advanced.
Regards
ashish .
If you include the exact console output you're seeing, it would be much easier to help you. But based on snags other people have encountered recently, you can try these things:
Make sure your PATH includes Python 2.7 (otherwise "create-project" will fail).
Delete all these folders to be sure you're starting from a clean slate: deps, Debug, include, libcef_dll, Release, Resources.
Just run the high-level tasks grunt setup and grunt build, following the Building brackets-shell instructions. (There's a known bug where grunt cef-extract fails when run standalone).
I am trying to compile Rcpp_0.9.7 from source on sparc-sun-solaris2.10. I am getting the following error when I try to use install.packages:
sh: make: not found
ERROR: compilation failed for package 'Rcpp'
From research on the internet, it appears others have had similar problems with solaris. Unfortunately I do not know very much about which compilers I should or should not be using. One thing I am beginning to realize, however, is that solaris seems to be a sub-optimal environment for running R (in terms of performance as well as convenience).
Solaris can mean different things: it could be Solaris on x86, or Solaris on Sparc.
According to the Rcpp build results page on CRAN, Rcpp does now build on x86 Solaris (thanks to a recent patch by Martyn Plummer) but not Sparc Solaris. We were just discussing that this week on the rcpp-devel list.
As for your error, you are lacking critical components, namely the make tool. You likely lack more. Your conclusion is correct, though. Depending your level of Unix knowledge, you may be best off to simply install Ubuntu and enjoy tens of thousands of pre-built packages, including R and well over a hundred related packages.
Not really a solution but too long for a comment.
First of all get a decent environment for your testing of building Rccp on Solaris. Personally I use VirtualBox on my Windows workstation. This way I have an environment that I can control myself and do not depend on any grumpy SysAdmin. Best of all: there's no cost involved! When you are confident with your build you can either (1) move the binaries over to your target host or (2) replicate the build setup on your target host.
Secondly you can use these instructions to set up a proper build host on Solaris. (you seem to be lacking some crucial tools!). Remember to use gmake when building as per the instructions in the posting.
As Dirk mentioned, you're lacking the make command. If you're running Solaris 10
or earlier, then you need to find your installation media and pkgadd SUNWsprot.
If you're running Solaris 11 or later, then
pkg install developer/build/make
will get you that utility. You probably need the system headers as well, which are in pkg://solaris/system/header for Solaris 11 and later, or SUNWhea in earlier releases.
I see that you mention sparc-sun-solaris2.10 in your question - is there any opportunity for you to update to Solaris 11 or later? The developer environment is muchmuch nicer in the newer releases. Certainly easier to get a copy of a compiler....