I have two apps(say App A and App B). App A gives a link to navigate to App B. On Initial load of App B, it creates a session with a new new Session Id. Further moving into the app, more values are stored in that session. If a select the link and do "open in new tab" multiple times, it will create a new GUID as a session id in each tab. Now i close all the tabs and come back to App A. App A doesn't have a session management mechanism and its session never expires but App B has and also has the session expire page.
After leaving the browser idle for sometime, say 20 mins or so when i try to navigate to the App B, it detects a expired session from the browsers cache and directly redirects to the session expire page of App B which is not an expected behavior. Every time a user tries to go to App B, He should have a fresh session.
Any suggestions on how to handle this scenario ?
Thanks in Advance!!
Related
We have got requirement to restrict concurrent login of same user across 2 Web Applications.
We have 2 Web Applications for example: WebApp1, WebApp2.
User: Dashboard
If Dashboard user is logged into WebApp1 then the same user is not allowed to login to WebApp2 instead show error message on second login.
Tried Solution:
Block 2nd login with same user id if there is an active session and show error message to user.
The idea is to maintain user id, Application Name and session id in DB. On second login of same user check if record exist in DB table against the user id then block 2nd login and show error message to user.
Clear the DB record (UserId, Session Id, and Application Name) in following
scenarios:
Logout
Session Timeout
Restart of Application.
Not Sure how to handle below scenarios.
Close Browser.
Browser Crash
System Crash
If 2nd login request is from valid user then Admin should able to Invalidate the session of first login as this user is attacker.
what is best way to invalidate Http session of WebApp2/ WebApp1?
If you really need to know the state of the first session, I would skip trying to manage sessions in the server, and instead maintain a heartbeat from the client. Have the client make a request every 5 seconds to the server which updates a "Last Seen" record, which includes their IP address and which app they are from, and whether "Last Seen" was a logout event.
Then the other app can interrogate "Last Seen", and if it's more than 5 seconds (I'd actually bump it to 10 for the interrogation), or a LogOut event, assume that the first session went away, and that they are free to log into the second application. If "Last Seen" is less than 5-10 seconds, bump them both out and alert the admin with both the IP Addresses to decide which one should be killed.
In addition to what you have, you could save last activity time in your session DB, and update it, when there is a session update, how often ( every request or once in 5 min for example) it depends on your requirements. Then in case of app/browser/system restart, you log in user, even if record exist, if it is older that session timeout. And you can have admin user that can manually delete entry if required.
The other solution would be to always log in new app, and logout the old one. But that would require introducing additional logic in the application to check if session is still valid.
I've configured SQL Server to store session state (from here).
All I want to do is that when the user has logged into my application via browser A, I see that logged session when I visit my app from the browser B.
Right now that scenario doesn't work, I must log in one more time.
When browser B is opened (assuming it's a different browser altogether or a new instance of the same browser) a new session is created; therefore, what you see is expected behavior.
Also, I assume you mention this because you store in session some sort of key that indicates that the user has logged in successfully, correct?
If you want this behavior, you'd need to send some sort of authentication cookie with a long expiration date, you'd then read the cookie on the login page and consider the user as successfully authenticated, but keep in mind that this is a potential security risk.
How to tackle this session problem in ASP.NET,VB.NET?
The following requirement are there:
When the authorized user logs into the system that user is not allowed to login from another computer or in different browser other than that user is using right at this time.
The remedy we applied was: We have kept "Is_Loggedin" as a column with data type "bit" in a mst_vendor as a table name. When a user logs in we set the flag, Is_Loggedin, to "1" and each time when someone tries to log in using this account, the system is showing the error "The user is already logged in.".
When the user logs out it turns to "0" as the logout procedure calls as soon as the user clicks the log out button.
Problem scenario:
When the user closes the browser the flag remains the same, that is, "1".
When power gets off, it remains the same as "1".
If the session timeouts after a predefined value it remains the same.
There may be different scenarios other than this.
Is there any way so that we can store this internal flagging for the user's login status using the application object?
It may improve efficiency of the system and also eliminates the above problematic scenarios.
You should use the Global.asax file and use the Session_End function.
Session_End: Fired when a user's session times out, ends, or they leave the application Web site.
Store a datetime as another column next to the bit, and update it each and every time the user requests a page.
When a new user comes along with the same credentials and the bit is "1" you can check the datetime, and if it was a while ago you can be certain the user is no longer there. So let the login go ahead.
You could keep a pulse going in script, and when the pulse times out, consider the user finished with that session.
The benefit to this is that you can tell the difference between the user sitting idle on the site and the user leaving the site.
From a very top level view, here is what you can do
Use Cache with SlidingExpiration.
Everytime a user attempts login, check the cache with his username as the key. If an entry exists in the cache, you can say that user is already logged in and deny login.
If the key is not found, allow login and create a new key in the cache as the username and set the sliding expiration time. (This should be carefully chosen as this would be the duration, the user wouldnt be locked out after the browser is closed and user attempts to relogin.)
In the Application_PreRequestHandlerExecute handler in Global, check if the user is currently active (you can use sessions for this), reset the sliding expiration time for the user. This way, with each page request the cache expiration time would be reset.
If the user closes the browser and moves off, the cache would expire after the set period of time, and would free the user to log in again.
if in case the user attempts to login again before the cache expires, the user would have to wait for some time to let the cache expire.
if the user logs off properly, you can remove the cache entry on the logoff event such that user doesnt have to wait to relogin.
The Sliding expiration timeout can be synced with session timeout to emulate the actual session timeout for the application.
With this approach, you would also save on a lot of database round trips to update/check the user status and this would work irrespective of the hosting enviornment or the session modes.
Yeah, a script would be a good idea. Just set the session timeout to be 5 minutes instead of 20 and then write a method into session.end in the global.asax file that updates the database accordingly.
I am creating a content management system but there is one problem. What I want to do in my website is that when a user opens the website a new sessionid is created for that user, and when the user closes the website, the sessionid is cleared. How can I can do it?
There isn't a way to detect when a user closes your site or navigates away from your site. After a given period of inactivity (default 20 min), the user's session object will expire and be automatically cleared. I suggest checking out the MSDN article on Session, which will go over your options for tweaking your application's Session.
If on the other hand you're looking to perform custom logic when a user's session begins or expires (due to inactivity), you can add a Global.asax file to your application and use the Session_Start and Session_End methods for that.
That is basically the default behaviour of sessions in ASP.NET.
When a user closes the browser, the non-persistent cookie maintaining the Session ID will be dropped. This wouldn't actually expire the session, but since no reference to it will exist anymore, it will expire automatically within the default 20 minutes. Users revisiting your site after closing the browser window would have to use a new session. (Source)
An easy solution which works independently of Asp.net is to put timestamps on your session data and delete expired entries periodically.
I am trying to find out in my asp.net application the users that are currently logged in the application by searching on the session info. Currently, I am only able to see my current session, but I cannot find out if there are other users using it. Is there a way to see if there are other users using the application by looking at the session information
Session state is per user - Application state (global) seems to be what you're looking for.
There are 2 hashes Session and Application, in which you can store key-value pairs.
A way to do it would be to update Application[UserNamesList] whenever there is a successful login. This would then be visible to all users. Application state would however be lost whenever the App Web Server recycles or restarts... but that shouldn't be a problem in this case.
A session is supposed to only give you information about the currently logged-in user.
If you need to keep track of all logged-in users, you could consider writing the users into a global variable. Here is info on how that works. Note that sessions expire. You would have to write, for each user, the time the user was last seen (i.e. each time they hit a new page, update their record). When the time they were last seen is greater than your session timeout, it's safe to assume they are no longer logged in and you can remove them from the list of current users. If they just up and close their browser, you will not be alerted and you will still think they are logged in even though they are not.