I am trying to configure Alfresco Community 3.3 on a port other than its default port of 8080. I need it to run on 8989. I think I have change all instances of 8080 (where it is mentioned in configuration files) to 8989, and I am able to access Alfresco Explorer okay. So far so good.
But, when I try to access http://localhost:8989/share I get the following error
java.io.IOException: Unable to test document path:
alfresco/site-data/configurations/slingshot.site.configuration.xml in
remote store: alfresco due to error: 404
The files I have changed are as follows:
tomcat/conf/server.xml
tomcat/shared/classes/alfresco/web-extension/share-config-custom.xml
tomcat/webapps/alfresco/WEB-INF/classes/alfresco/file-severs.xml
tomcat/webapps/alfresco/WEB-INF/classes/alfresco/repository.properties
tomcat/webapps/alfresco/WEB-INF/classes/alfresco/subsystem/sysAdmin/default/sysadmin-parameter.properties
tomcat/webapps/alfresco/wsdl/access-control-service.wsdl
tomcat/webapps/alfresco/wsdl/administration-service.wsdl
tomcat/webapps/alfresco/wsdl/action-service.wsdl
tomcat/webapps/alfresco/wsdl/authentication-service.wsdl
tomcat/webapps/alfresco/wsdl/authoring-service.wsdl
tomcat/webapps/alfresco/wsdl/classification-service.wsdl
tomcat/webapps/alfresco/wsdl/content-service.wsdl
tomcat/webapps/alfresco/wsdl/dictionary-service.wsdl
tomcat/webapps/alfresco/wsdl/repository-service.wsdl
virtual-tomcat/conf/server-minimal.xml
virtual-tomcat/conf/server.xml
Have I missed something obvious?
(Please make no suggestions about upgrading......)
I think you have overdone it.
According to
http://wiki.alfresco.com/wiki/Changing_Default_Port_Configuration
you should only change it in share-config-custom.xml
Change all the files back but share-config-custom.xml
Four are the files to be changed in Alfresco 5.2 in order to set the various ports:
[alfresco-community_instDir]\properties.ini
[alfresco-community_instDir]\tomcat\conf\server.xml
[alfresco-community_instDir]\tomcat\shared\classes\alfresco-global.properties
[alfresco-community_instDir]\tomcat\webapps\share\WEB-INF\classes\alfresco\share-cmis-config.xml
Related
I have set up kong in dbless mode on RHEL by following the below documentation
https://docs.konghq.com/gateway/latest/install-and-run/rhel/
Kong gateway is successfully started. Below are the configurations I added in kong.conf file where database is turned to off and path to declarative kong.yaml is specified
declarative_config = /temp/kong/kong.yml
database = off
Also, below is current .yaml file where I created a service using below link
https://docs.konghq.com/gateway/2.8.x/get-started/comprehensive/expose-services/
_format_version: "1.1"
services:
- host: mockbin.org
name: example_service
port: 80
protocol: http
routes:
- name: mocking
paths:
- /mock
strip_path: true
I have also installed deck to sync this the declarative configuration.
However, when I use the deck sync command to add this service to kong, I get below error
creating service example_service
Summary:
Created: 0
Updated: 0
Deleted: 0
Error: 1 errors occurred:
while processing event: {Create} service example_service failed: HTTP status 405 (message: "cannot create or update 'services' entities when not using a database")
Kindly need ideas on what could be wrong as I believe we can create a service in dbless mode, and I also think that this is the declarative format which should work. Looking forward to hear. Thanks
Kindly need ideas on what could be wrong as I believe we can create a service in dbless mode, and I also think that this is the declarative format which should work. Looking forward to hear. Thanks
You are correct that we can create a service in dbless mode, however the approach will be different.
If you already have the new config file in yaml format. you can load it to Kong using /config endpoint
I also think that decK should be process-agnostic and can be used with both db and dbless mode, But as it stands, loading yaml config file with /config endpoint looks like the best option.
I generated certs for my app using certbot/Letsencrypt. I got two pem files which I added in my kibana.yml file. When I try to access kibana through https://domainName:5601 I get timeout error, while I can access it with IP. Am I missing something?
This is my kibana.yml:
server.name: kibana
server.host: "0.0.0.0"
server.ssl.enabled: true
server.ssl.certificate: "/usr/share/kibana/config/certs/fullchain.pem"
server.ssl.key: "/usr/share/kibana/config/certs/privkey.pem"
If you upgraded with the latest version i.e. 7.x then u need to add server.publicBaseUrl in your kibana.yml
for e.g. server.publicBaseUrl=xyz.com
so it will allow you to redirect your website.
For me it is working fine after adding this parameter inside kibana.yml
I want to send my weblogic log to syslog. here is what I have done so far.
1.Included following log4j.properties in managed server classpath -
log4j.rootLogger=DEBUG,syslog
log4j.appender.syslog=org.apache.log4j.net.SyslogAppender
log4j.appender.syslog.Threshold=DEBUG
log4j.appender.syslog.Facility=LOCAL7
log4j.appender.syslog.FacilityPrinting=false
log4j.appender.syslog.Header=true
log4j.appender.syslog.SyslogHost=localhost
log4j.appender.syslog.layout=org.apache.log4j.PatternLayout
log4j.appender.syslog.layout.ConversionPattern=[%p] %c:%L - %m%n
2. added following command to managed server arguments -
-Dlog4j.configuration=file :<path to log4j properties file> -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Log4JLogger -Dweblogic.log.Log4jLoggingEnabled=true
3. Added wllog4j.jar and llog4j-1.2.14.jar into domain's lib folder.
4.Then, from Admin console changed logging information by doing the following. "my_domain_name"--->Configuration--->Logging--->(Advanced options)-->Logging implementation: Log4J
Restart managed server.
I used this as refernce. But didnt get anaything in syslog(/var/log/message). What am I doing wrong?
I would recommend a couple items to check:
Remove the space in DEBUG, syslog in the file
Your last two server arguments have a space between the - and the D so make sure that wasn't just a copy and paste error in this post.
Double check that the log files are in the actual classpath.
Double check from a ps command, that the -D options made it correctly into the start command that was executed.
Make sure that the managed server has a copy of the JARs correctly as they would get synchornized from admin during the restart.
Hopefully something in there will help or give an idea of what to look for.
--John
I figured out the problem. My appender was working fine, the problem was in rsyslog.conf. Just uncommented following properties
# Provides UDP syslog reception
#$ModLoad imudp
#$UDPServerRun 514
We were appending the messages, but the listner was abesnt, so it didnt knew what to do with it.
and from *.debug;mail.none;authpriv.none;cron.none /var/log/messages it figures out where to redirect any (debug in this case) information to messages file.
I know you can open files from Symfony profiler or exception file links using this in project/app/config.yml :
framework:
ide: "phpstorm://open?file=%%f&line=%%l"
More info: http://developer.happyr.com/open-files-in-phpstorm-from-you-symfony-application
However as I'm using vagrant, the file path of the server doesn't match my host.
I have created a PHP web application server in PHPStorm with the propper path mappings, but still doesn't work.
Any ideas?
Thanks
When running your app in a container or in a virtual machine, you can tell Symfony to map files from the guest to the host by changing their prefix. This map should be specified at the end of the URL template, using & and > as guest-to-host separators:
// /path/to/guest/.../file will be opened
// as /path/to/host/.../file on the host
// as /path/to/host/.../file on the host
'phpstorm://%f:%l&/path/to/guest/>/path/to/host/&/foo/>/bar/&...'
Symfony FrameworkBundle Configuration - IDE
The answer given by Jeffry no longer works unfortunately :(. When In configure that with my paths the profiler throws:
ParameterNotFoundException
You have requested a non-existent parameter "f:".
I have configured the path according to this line in the SF docs: This map should be specified at the end of the URL template, which results in this:
phpstorm://open?url=file://%%f&line=%%l&/path/to/guest/>/path/to/host/
However, it does open PHPStorm, but phpstorm does not open the file, so i'm a bit stuck here now.
This solves the issue with the file not opening in PhpStorm from a Vagrant:
phpstorm://open?file=%%f&line=%%l&/path/to/guest/>/path/to/host/
Source: https://youtrack.jetbrains.com/issue/IDEA-65879
I'm using Symfony 2 and have this row in my parameters.ini:
database_driver = pdo_pgsql
When I was creating database structure with Doctrine everything was good. But if I want to add some doctrine object to my darabase (insert row), I catch an exception:
What I have to do with this?
Are you sure you're using pdo_pgsql? Are you running on localhost? It might be very certain that you are using pdo_mysql driver instead.
However you have to check the following:
php.ini
extension=pdo.so
extension=pdo_mysql.so
or in your case
extension=pdo.so
extension=pdo_pgsql.so
You can check the phpinfo(); to find out the configured database driver.
In your symfony project you have to check the parameters.ini file in config folder. E.g.
[parameters]
database_driver="pdo_mysql"
database_host="localhost"
Besides try to avoid this error
'stty' is not recognized as an internal or external command,
operable program or batch file.
https://github.com/symfony/symfony/issues/4974
First of all, verify your php.ini file: the extensions php_pdo_pgsql and php_pdo must be enabled. Make sure you apply this changes on php.ini file that your symfony project is using, check this on localhost/path_to_your_project/web/config.php. You know if this extensions are enabled executing the function phpinfo().
This command is also helpfull: php -m. It lists on console all the php modules that are loaded.
Tip: check out you Apache error log, there could be something wrong with the load of your extensions. This file is located according to your server configuration.